Department of Materials, Manufacturing & Industrial Engineering

Research Output 1992 2018

2018
Magnesium Oxide
Silicon
Durapatite
Magnesium
Nanocomposites
1 Citations

Drug release, cytocompatibility, bioactivity, and antibacterial activity of doxycycline loaded Mg-Ca-TiO2 composite scaffold

Bakhsheshi-Rad, H. R., Hamzah, E., Staiger, M. P., Dias, G. J., Hadisi, Z., Saheban, M. & Kashefian, M. 5 Feb 2018 In : Materials and Design. 139, p. 212-221 10 p.

Research output: Research - peer-reviewArticle

Doxycycline
Bioactivity
Scaffolds
Composite materials
Pharmaceutical Preparations

Effect of gadolinium addition on microstructural evolution and solidification characteristics of Al-15%Mg2Si in-situ composite

Ghandvar, H., Idris, M. H., Ahmad, N. & Emamy, M. 1 Jan 2018 In : Materials Characterization. 135, p. 57-70 14 p.

Research output: Research - peer-reviewArticle

Gadolinium
Microstructural evolution
Solidification
Composite materials
gadolinium

In-vitro biocompatibility study of hydroxyapatite coated on Co-Cr-Mo with oxide interlayer

Mas Ayu, H., Izman, S., Daud, R., Shah, A., Anwar, M., Krishnamurithy, G. & Kamarul, T. 1 Jan 2018 In : Jurnal Teknologi. 80, 1, p. 35-42 8 p.

Research output: Research - peer-reviewArticle

Biocompatibility
Hydroxyapatite
Oxides
Substrates
Coatings

In vitro degradation behavior, antibacterial activity and cytotoxicity of TiO2-MAO/ZnHA composite coating on Mg alloy for orthopedic implants

Bakhsheshi-Rad, H. R., Hamzah, E., Ismail, A. F., Aziz, M., Daroonparvar, M., Saebnoori, E. & Chami, A. 25 Jan 2018 In : Surface and Coatings Technology. 334, p. 450-460 11 p.

Research output: Research - peer-reviewArticle

Composite coatings
Orthopedics
Cytotoxicity
Degradation
Coatings
3 Citations
Carbon footprint
Multi-objective genetic algorithm
Schedule
Job shop scheduling
carbon footprint

The inter-rater and intra-rater reliability analysis of workplace ergonomic risk assessment

Rohani, J. M., Adeyemi, A. J., Aziz, R. A. & Abdul Rani, M. R. 1 Jan 2018 In : Jurnal Teknologi. 80, 1, p. 53-59 7 p.

Research output: Research - peer-reviewArticle

Ergonomics
Reliability analysis
Risk assessment
Cranes
Tires
2017

3D biofabrication of thermoplastic polyurethane (TPU)/poly-L-lactic acid (PLLA) electrospun nanofibers containing maghemite (γ-Fe2O3) for tissue engineering aortic heart valve

Fallahiarezoudar, E., Ahmadipourroudposht, M., Yusof, N. M., Idris, A. & Ngadiman, N. H. A. 1 Nov 2017 In : Polymers. 9, 11, 584

Research output: Research - peer-reviewArticle

Polyurethanes
Nanofibers
Tissue engineering
Scaffolds
Thermoplastics
1 Citations
Wetting
Reinforcement
Aluminum
Composite materials
Metals

A comparative study of nanocrystalline SiC thin films on multimode optical fiber sensors, synthesized via DBD-NTP and 150MHz VHF-PECVD

Younus, M. H., Khalajabadi, S. Z., Yajid, M. A. M., Abu, A. B. H., Ameen, O. F., Redzuan, N., Ahmad, N., Omar, M. F. & Ibrahim, R. K. R. 1 Jan 2017 (Accepted/In press) In : Ceramics International.

Research output: Research - peer-reviewArticle

Multimode fibers
Fiber optic sensors
Plasma enhanced chemical vapor deposition
Plasmas
Thin films

A comparison RSM and ANN surface roughness models in thin-wall machining of Ti6Al4V using vegetable oils under MQL-condition

Mohruni, A. S., Yanis, M., Sharif, S., Yani, I., Yuliwati, E., Ismail, A. F. & Shayfull, Z. 26 Sep 2017 3rd Electronic and Green Materials International Conference 2017, EGM 2017. American Institute of Physics Inc., Vol. 1885, 020161

Research output: ResearchConference contribution

thin walls
vegetables
lubrication
machining
surface roughness
5 Citations

A decision support model for sustainable supplier selection in sustainable supply chain management

Fallahpour, A., Udoncy Olugu, E., Nurmaya Musa, S., Yew Wong, K. & Noori, S. 1 Mar 2017 In : Computers and Industrial Engineering. 105, p. 391-410 20 p.

Research output: Research - peer-reviewArticle

Supply chain management
Uncertainty
Sustainable development
Social aspects
Statistical tests

A Fuzzy Logic-Based Knowledge Management Performance Measurement System for SMEs

Lee, C. S. & Wong, K. Y. 8 Mar 2017 (Accepted/In press) In : Cybernetics and Systems. p. 1-26 26 p.

Research output: Research - peer-reviewArticle

Knowledge management
Fuzzy logic
Computer systems
Industry
MATLAB
3 Citations

A fuzzy periodic review integrated inventory model involving stochastic demand, imperfect production process and inspection errors

Jauhari, W. A., Mayangsari, S., Kurdhi, N. A. & Wong, K. Y. 1 Jan 2017 In : Cogent Engineering. 4, 1, 1308653

Research output: Research - peer-reviewArticle

Stochastic models
Inspection
Costs
Sensitivity analysis
Normal distribution

A Neural Network Approach for Predicting Manufacturing Performance Using Knowledge Management Metrics

Tan, L. P. & Wong, K. Y. 12 Mar 2017 (Accepted/In press) In : Cybernetics and Systems. p. 1-17 17 p.

Research output: Research - peer-reviewArticle

Knowledge management
Neural networks
Industry
Testing

An improved biogeography-based optimization for achieving optimal job shop scheduling solutions

Piroozfard, H., Wong, K. Y. & Asl, A. D. 2017 In : Procedia Computer Science. 115, p. 30-38 9 p.

Research output: Research - peer-reviewArticle

Job shop scheduling

An integrated study of surface roughness in EDM process using regression analysis and GSO algorithm

Zainal, N., Mohd Zain, A., Sharif, S., Nuzly Abdull Hamed, H. & Mohamad Yusuf, S. 21 Sep 2017 In : Journal of Physics: Conference Series. 892, 1, 012002

Research output: Research - peer-reviewArticle

machining
regression analysis
surface roughness
optimization
pulses

An introduction to electrospun nanofibers for tissue engineering heart valves

Fallahiarezoudar, E., Yusof, N. M., Idris, A. & Ngadiman, N. H. A. 1 Jan 2017 Electrospinning and Electroplating: Fundamentals, Methods and Applications. Nova Science Publishers, Inc., p. 127-152 26 p.

Research output: ResearchChapter

Nanofibers
Tissue engineering
Electrospinning
Polymer solutions
Nozzles

Application of product sustainability evaluation tool (ProSET) on car seat design configurations

Hassan, M. F., Mahmood, S., Saman, M. Z. M., Sharif, S. & Sapuan, S. Z. 1 Jun 2017 In : International Journal of Mechanical and Mechatronics Engineering. 17, 3, p. 88-97 10 p.

Research output: Research - peer-reviewArticle

Seats
Sustainable development
Railroad cars
Decision making
Product development

A Predictive Integrated Genetic-Based Model for Supplier Evaluation and Selection

Fallahpour, A., Wong, K. Y., Olugu, E. U. & Musa, S. N. 1 Aug 2017 In : International Journal of Fuzzy Systems. 19, 4, p. 1041-1057 17 p.

Research output: Research - peer-reviewArticle

Evaluation
Model
Gene Expression Programming
Gene expression
Programming Model
1 Citations
Electrospinning
Scaffolds (biology)
Tissue engineering
Tissue Scaffolds
Tissue Engineering
Metal cutting
Lubrication
metals
methodology
nanofluids
Bone
Plasticity
Plastic deformation
Experiments
Strain energy

Assessment of lean manufacturing practices: An operational perspective

Galankashi, M. R. & Helmi, S. A. 2017 In : International Journal of Services and Operations Management. 28, 2, p. 163-184 22 p.

Research output: Research - peer-reviewArticle

Supply chains
Lean production
Lean manufacturing
Supply chain
Logistics
2 Citations
Decision making
Fuzzy sets

Characterisation and thermodynamic calculations of biodegradable Mg–2.2Zn–3.7Ce and Mg–Ca–2.2Zn–3.7Ce alloys

Bakhsheshi-Rad, H. R., Hamzah, E., Joy Yii, S. L., Mostafa, A., Ebrahimi-Kahrizsangi, R. & Medraj, M. 24 Jul 2017 In : Materials Science and Technology (United Kingdom). 33, 11, p. 1333-1345 13 p.

Research output: Research - peer-reviewArticle

Thermodynamics
thermodynamics
Degradation
degradation
Elongation

Characterization of phase formation in Al-20%Mg2Si-2%Cu metal matrix composite

Nordin, N. A., Abu Bakar, T. A., Hamzah, E., Farahany, S. & Ourdjini, A. 2017 Current Trends in Materials Engineering II - 25th Scientific Conference Microscopy Society. Trans Tech Publications Ltd, Vol. 264 SSP, p. 186-189 4 p. (Solid State Phenomena; vol. 264 SSP)

Research output: ResearchConference contribution

metal matrix composites
composite materials
Metals
Composite materials
eutectics

Comparative evaluation of physicochemical properties of jatropha curcas seed oil for coolant-lubricant application

Murad, M. N., Sharif, S., Rahim, E. A. & Abdullah, R. 26 Sep 2017 3rd Electronic and Green Materials International Conference 2017, EGM 2017. American Institute of Physics Inc., Vol. 1885, 020186

Research output: ResearchConference contribution

coolants
lubricants
seeds
oils
evaluation

Conclusion

Ahmad, N. A., Md. Tap, M., Syahrom, A. & Mohd. Rohani, J. 2017 SpringerBriefs in Applied Sciences and Technology. 9789811032851 ed. Springer Verlag, p. 39-41 3 p. (SpringerBriefs in Applied Sciences and Technology; no. 9789811032851)

Research output: ResearchChapter

Friction
Human Perception
Risk Factors
Differentiate
Roughness

Current and future issues in electronics and automobiles remanufacturing operations

Kafuku, J. M., Saman, M. Z. M. & Yusof, S. R. M. 17 Jan 2017 FTC 2016 - Proceedings of Future Technologies Conference. Institute of Electrical and Electronics Engineers Inc., p. 415-421 7 p. 7821642

Research output: ResearchConference contribution

motor vehicle
electronics
Automobiles
Electronic equipment
electronics industry

Defocusing Effects of Laser Beam on the Weldability of Powder Metallurgy Ti-Based Shape Memory Alloys

Bahador, A., Hamzah, E., Kondoh, K., Abubakar, T., Yusof, F., Saud, S. N., Ibrahim, M. K. & Ezazi, M. A. 2017 In : Procedia Engineering. 184, p. 205-213 9 p.

Research output: Research - peer-reviewArticle

Weldability
Powder metallurgy
Shape memory effect
Laser beams
Welds
3 Citations

Development of highly porous biodegradable γ-Fe2O3/polyvinyl alcohol nanofiber mats using electrospinning process for biomedical application

Ngadiman, N. H. A., Yusof, N. M., Idris, A., Misran, E. & Kurniawan, D. 1 Jan 2017 In : Materials Science and Engineering C. 70, p. 520-534 15 p.

Research output: Research - peer-reviewArticle

Polyvinyl alcohols
Electrospinning
Nanofibers
Porosity
Polyvinyl Alcohol
3 Citations
Measurement Techniques
Aspect Ratio
Electrode
Fabrication
Aspect ratio

Developments in tissue engineering scaffolding using an electrospinning process

Ngadiman, N. H. A., Noordin, M. Y., Idris, A., Kurniawan, D., Fallahiarezoudar, E. & Sudin, I. 1 Jan 2017 Electrospinning and Electroplating: Fundamentals, Methods and Applications. Nova Science Publishers, Inc., p. 87-125 39 p.

Research output: ResearchChapter

Electrospinning
Nanofibers
Tissue engineering
Scaffolds (biology)
Structural design
Polyesters
Aerogels
Silicon Dioxide
Particles (particulate matter)
Mechanical properties

Drug delivery and cytocompatibility of ciprofloxacin loaded gelatin nanofibers-coated Mg alloy

Bakhsheshi-Rad, H. R., Hadisi, Z., Hamzah, E., Ismail, A. F., Aziz, M. & Kashefian, M. 15 Nov 2017 In : Materials Letters. 207, p. 179-182 4 p.

Research output: Research - peer-reviewArticle

Gelatin
Ciprofloxacin
Nanofibers
Drug delivery
gelatins

Dual-layer hollow fiber MT-SOFC using lithium doped CGO electrolyte fabricated via phase-inversion technique

Jamil, S. M., Othman, M. H. D., Rahman, M. A., Jaafar, J., Mohamed, M. A., Yusop, M. Z. M., Ismail, A. F. & Tanemura, M. 1 Jun 2017 In : Solid State Ionics. 304, p. 113-125 13 p.

Research output: Research - peer-reviewArticle

solid oxide fuel cells
gadolinium
cerium
hollow
lithium
1 Citations

Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti–23 at% Nb shape-memory alloys

Bahador, A., Hamzah, E., Kondoh, K., Abu Bakar, T. A., Yusof, F., Imai, H., Saud, S. N. & Ibrahim, M. K. 15 Mar 2017 In : Materials and Design. 118, p. 152-162 11 p.

Research output: Research - peer-reviewArticle

Shape memory effect
Microstructure
Temperature
Intermetallics
Austenite

Effect of equal channel angular pressing on yield stress and fatigue properties of Al 6063 alloy

Razzaq, A. M., Majid, D. L., Uday, M. B., Ishak, M. R. & Hashim, N. 2017 In : Journal of Engineering and Applied Sciences. 12, 8, p. 2143-2147 5 p.

Research output: Research - peer-reviewArticle

Equal channel angular pressing
Yield stress
Fatigue of materials
Plastic deformation
Mechanical properties

Effect of etching as pre-treatment for electroless copper plating on silicon wafer

Shahidin, S. A. M., Fadil, N. A., Yusop, M. Z., Tamin, M. N. & Osman, S. A. 1 Nov 2017 In : Jurnal Teknologi. 79, 7, p. 61-69 9 p.

Research output: Research - peer-reviewArticle

Copper plating
Electroless plating
Silicon wafers
Etching
Copper
1 Citations

Effect of heat treatment on mechanical properties and microstructure of selective laser melting 316L stainless steel

Kamariah, M. S. I. N., Harun, W. S. W., Khalil, N. Z., Ahmad, F., Ismail, M. H. & Sharif, S. 1 Nov 2017 In : IOP Conference Series: Materials Science and Engineering. 257, 1, 012021

Research output: Research - peer-reviewArticle

Stainless Steel
Microhardness
Melting
Heat treatment
Mechanical properties
Molybdenum alloys
Carbide tools
Chromium alloys
Cobalt
Surface roughness
Electric discharge machining
Carbon Monoxide
Powders
Wear of materials
ferric oxide

Effect of sintering temperature on the morphology and adhesion strength of eggshell coating on mild steel

Jafar, N. M., Abubakar, T., Chong, C. Y. & Ahmad, N. H. 2017 Current Trends in Materials Engineering II - 25th Scientific Conference Microscopy Society. Trans Tech Publications Ltd, Vol. 264 SSP, p. 190-193 4 p. (Solid State Phenomena; vol. 264 SSP)

Research output: ResearchConference contribution

Bond strength (materials)
Carbon steel
Sintering
Coatings
Temperature

Effect of Sn additions on the microstructure, mechanical properties, corrosion and bioactivity behaviour of biomedical Ti–Ta shape memory alloys

Ibrahim, M. K., Hamzah, E., Saud, S. N., Nazim, E. M., Iqbal, N. & Bahador, A. 30 Aug 2017 (Accepted/In press) In : Journal of Thermal Analysis and Calorimetry. p. 1-11 11 p.

Research output: Research - peer-reviewArticle

shape memory alloys
corrosion
mechanical properties
microstructure
temperature

Effect of Superheating Melt Treatment on Mg2Si Particulate Reinforced in Al-Mg2Si-Cu in situ Composite

Nordin, N. A., Abubakar, T., Hamzah, E., Farahany, S. & Ourdjini, A. 2017 In : Procedia Engineering. 184, p. 595-603 9 p.

Research output: Research - peer-reviewArticle

Composite materials
Temperature
Thermoanalysis
High temperature applications
Nucleation

Effect of ta additions on the microstructure, damping, and shape memory behaviour of prealloyed Cu-Al-Ni shape memory alloys

Saud, S. N., Hamzah, E., Bakhsheshi-Rad, H. R. & Abubakar, T. 2017 In : Scanning. 2017, 1789454

Research output: Research - peer-reviewArticle

spectral mixture analysis
shape memory alloys
damping
recovery
microstructure
1 Citations

Effect of Wettability Enhancement of SiC Particles on Impact Toughness and Dry Sliding Wear Behavior of Compocasted A356/20SiCp Composites

Ghandvar, H., Farahany, S. & Idris, M. H. 28 Feb 2017 (Accepted/In press) In : Tribology Transactions. p. 1-12 12 p.

Research output: Research - peer-reviewArticle

toughness
wettability
sliding
composite materials
augmentation

Effects of metal fillers on properties of epoxy for rapid tooling inserts

Khushairi, M. T. M., Sharif, S., Jamaludin, K. R. & Mohruni, A. S. 2017 In : International Journal on Advanced Science, Engineering and Information Technology. 7, 4, p. 1155-1161 7 p.

Research output: Research - peer-reviewArticle

Filler metals
Fillers
fillers (equipment)
filling materials
epoxides
1 Citations
Aerogels
Polyesters
Particle size
Silica
Mechanical properties