GRANT(PI & MEMBERS)

14

PUBLICATIONS

68

INDEXED PUBLICATION

50

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

INDUSTRY GRANTS
1
NATIONAL GRANTS
2
UNIVERSITY FUND
1
TOTAL

Publications

INDEXED PUBLICATION
50
NON-INDEXED PUBLICATION
5
OTHERS PUBLICATION
13
TOTAL

Supervisions

MASTER
2
PHD
2
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
High-Speed Microdrilling of 3D Printed Titanium Alloys Fabricated by Selective Laser Sintering (SLS): Machinability Evaluation and Surface Integrity
RUG OF UTM UTM Encouragement Research
2024
Effect of Quasi-Isotropic Stacking Sequence Mechanism on Energy Absorption Performance of Hybridized Graphene in Woven/Wire Mesh Glass Fibre Reinforced ABS Composites in Aircraft Radome Robustness
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2024
Vertically aligned hybrid nanocomposite material towards green and smart materials: A hygrothermal aging effects on ballistic strength, radar absorption and crack recognition study
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2024
MG1-28.0 : DEVELOPMENT OF SUSTAINABLE AND LIGHTWEIGHT THERMOPLASTIC COMPOSITE REINFORCED WITH WOOD FIBRE VIA INJECTION MOULDING
MEIBAN MICRO SDN BHD Contract
2024
MG1-28.1 : ELUCIDATING THE EFFECT OF CHEMICAL TREATMENT ON WATER ABSORPTION, SHEAR AND QUASI-STATIC INDENTATION PROPERTIES OF WOOD FIBRE/ POLYLACTIC ACID (PLA) COMPOSITES FABRICATED VIA INJECTION MOULDING
RUG OF UTM Matching Grant
2024
Research Collaboration Center for Nanocellulose
BADAN RISET DAN INOVASI NASIONAL (BRIN), INDONESIA COLLABORATIVE RESEARCH AND EXTERNAL GRANT
2024
Development of an Integrated Harvesting Mechanical Cutter Arm for Tall Oil Palm Trees
SIME DARBY PLANTATION SDN BHD. Contract Research DTD
2024
Experimental investigation of mechanical properties and creep performance analysis of cross arms under varied loading conditions
UNIVERSITI PUTRA MALAYSIA Networking Grant
2023
Failure Analysis of Impacted Glass Fiber Composite Cross Arm from Electrical Transmission Tower
UNIVERSITI TENAGA NASIONAL (UNITEN) Networking Grant
2023
Research Collaboration Center for Nanocellulose
BADAN RISET DAN INOVASI NASIONAL (BRIN), INDONESIA Networking Grant
2023
Characterizations of Hybrid Kenaf Fibre/Fibreglass Meshes Reinforced Thermoplastic ABS Composites for Future Use in Aircraft Radome Applications
RUG OF UTM UTM Encouragement Research
2022
Development of an exoskeleton for palm oil fruit harvesting
RUG OF UTM UTM Encouragement Research
2022
Characterizations of Thermochromic Nanocomposites as Heat Detection Material for Thermal Sensors
UNIVERSITI TENAGA NASIONAL (UNITEN) Networking Grant
2022

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Enhancing Flexural Properties Of Recycled Glass Fibre Reinforced Polyester With Eggshell-Derived Calcium Oxide
PROCEEDINGS OF THE SOUTH EAST ASIA-JAPAN CONFERENCE ON COMPOSITE MATERIALS 2024 (SEAJCCM2024)
Proceedings FIRST UTM CORRESPONDING AUTHOR
2024
Experimental And Numerical Investigation Of Flexural Mechanical And Creep Properties Of Sleeved Pgfrp Composite Cross-Arm Used In Transmission Tower Application
PROCEEDINGS OF THE SOUTH EAST ASIA-JAPAN CONFERENCE ON COMPOSITE MATERIALS 2024 (SEAJCCM2024)
Proceedings UTM FIRST AUTHOR
2024
Investigating The Influence Of Stacking Sequences On The Physical And Mechanical Characteristics Of Coconut Coir Fiber‑Reinforced Unsaturated Polyester Composites
FIBERS AND POLYMERS
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2024
Thermochromic Polymer Nanocomposites For The Heat Detection System: Recent Progress On Properties, Applications, And Challenges
POLYMERS
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2024
The Mechanical Performance Of Polymer Concrete Incorporating Waste Tin Fibres
PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR
2024
Crashworthiness Performance Of Filament Wound Gfrp Composite Pipes Depending On Winding Angle And Number Of Layers
CASE STUDIES IN CONSTRUCTION MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2024
A Review Of Non-Wood Lignocellulose Waste Material Reinforced Concrete For Light-Weight Construction Applications
PERTANIKA JOURNAL OF SCIENCE & TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR
2024
Lignocellulosic Abaca Fibre-Reinforced Thermoplastic Composites As Future Sustainable Structural Materials: A Bibliometric Analysis And Literature Review
CELLULOSE
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2024
Behavior Of Functionally Graded Carbon Nanotube Reinforced Composite Sandwich Beams With Pultruded Gfrp Core Under Bending Effect
FRONTIERS IN MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2024
Experimental Investigation And Analytical Verification Of Buckling Of Functionally Graded Carbon Nanotube-Reinforced Sandwich Beams
HELIYON
Publication In Web Of Science UTM FIRST AUTHOR
2024
A Review Of Bio-Based Nanocellulose Epoxy Composites
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
Publication In Web Of Science CO-AUTHOR
2024
Hybridizing Kenaf And Glass Fibres As Reinforcement In Abs Composites: Current Trends, Properties And Potential Application In Aircraft Radome
JURNAL KEJURUTERAAN
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2024
A Review: The State-Of-The-Art Of Arsenic Removal In Wastewater
WATER REUSE
Publication In Web Of Science CO-AUTHOR
2024
Mechanical Characterization, Water Absorption, And Thickness Swelling Of Lightweight Pineapple Leaf/Ramie Fabric-Reinforced Polypropylene Hybrid Composites
POLYMERS
Publication In Web Of Science 2ND UTM CORRESPONDING AUTHOR
2024
Nonlocal Theoretical Inquiry Into Pultruded Gfrp Plate Dynamics: Integrating Experimental And Numerical Analyses
JOURNAL OF ENGINEERED FIBERS AND FABRICS
Publication In Web Of Science UTM FIRST AUTHOR
2024
A State-Of-Art Review On The Sustainable Technologies For Cadmium Removal From Wastewater
WATER REUSE
Publication In Web Of Science CO-AUTHOR
2024
Potential Of Wood Fiber/Polylactic Acid Composite Microperforated Panel For Sound Absorption Application In Indoor Environment
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2024
Inclusion Of Nano-Fillers In Natural Fiber-Reinforced Polymer Composites: Overviews And Applications
NANOFILLERS FOR SUSTAINABLE APPLICATIONS
Book Chapter FIRST UTM CORRESPONDING AUTHOR
2024
Sound Absorption Of Microperforated Panel Made From Polylactic Acid (Pla)
JOURNAL OF PHYSICS: CONFERENCE SERIES
Publication In Scopus CO-AUTHOR
2024
Marine-Derived Collagen Composites For Bone Regeneration: Extraction And Performance Evaluation
POLYMER COMPOSITES DERIVED FROM ANIMAL SOURCES
Publication In Scopus UTM FIRST AUTHOR
2024
Full-Scale Evaluation Of Creep Coefficients And Viscoelastic Moduli In Honeycomb Sandwich Pultruded Gfrp Composite Cross-Arms: Experimental And Numerical Study
RESULTS IN ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2024
Cow Bone As Reinforcement Fillers In Polymer Composites For Structural Applications
POLYMER COMPOSITES DERIVED FROM ANIMAL SOURCES
Publication In Scopus UTM FIRST AUTHOR
2024
Creep Properties And Analysis Of Cross Arms' Materials And Structures In Latticed Transmission Towers: Current Progress And Future Perspectives
MATERIALS
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2023
Crushing And Flexural Properties Of Natural Fiber-Reinforced Concrete
BIOCOMPOSITES FOR INDUSTRIAL APPLICATIONS
Publication In Scopus CO-AUTHOR
2023
Banana Starch Nanocomposite Films Reinforced With Nanocellulose
NANOCELLULOSE-REINFORCED THERMOPLASTIC STARCH COMPOSITES: SUSTAINABLE MATERIALS FOR PACKAGING
Publication In Scopus CO-AUTHOR
2023
Wheat Thermoplastic Starch Composite Films Reinforced With Nanocellulose
NANOCELLULOSE-REINFORCED THERMOPLASTIC STARCH COMPOSITES: SUSTAINABLE MATERIALS FOR PACKAGING
Publication In Scopus UTM FIRST AUTHOR
2023
Introduction To Bio-Based Packaging Materials
NANOCELLULOSE-REINFORCED THERMOPLASTIC STARCH COMPOSITES: SUSTAINABLE MATERIALS FOR PACKAGING
Publication In Scopus CO-AUTHOR
2023
The Characteristics Of Polymer Concrete Reinforced With Polypropylene Fibres Under Axial And Lateral Compression Loads
PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2023
Zooming Into Recycling Of Composites
RECYCLED POLYMER BLENDS AND COMPOSITES PROCESSING, PROPERTIES, AND APPLICATIONS
Book Chapter CO-AUTHOR
2023
Introduction To Polymer Crystallization
POLYMER CRYSTALLIZATION: METHODS, CHARACTERIZATION AND APPLICATIONS
Book Chapter UTM FIRST AUTHOR
2023
Performance Evaluation Of Nanocellulose-Reinforced Biopolymer Composites
SYNTHETIC AND NATURAL NANOFILLERS IN POLYMER COMPOSITES
Book Chapter UTM FIRST AUTHOR
2023
Synthetic Nanofillers In Polymer Composites For Aerospace Industry
SYNTHETIC AND NATURAL NANOFILLERS IN POLYMER COMPOSITES
Book Chapter FIRST UTM CORRESPONDING AUTHOR
2023
Molecular Dynamics Of Nanocellulose-Based Nanocomposites: A Review
SYNTHETIC AND NATURAL NANOFILLERS IN POLYMER COMPOSITES
Book Chapter CO-AUTHOR
2023
Structures And Functionalizations Of Carbon Nanotubes In Water Treatment
SYNTHETIC AND NATURAL NANOFILLERS IN POLYMER COMPOSITES
Book Chapter UTM FIRST AUTHOR
2023
Natural/Synthetic Polymer Hybrid Composites—Lightweight Materials For Automotive Applications
GREEN HYBRID COMPOSITE IN ENGINEERING AND NON-ENGINEERING APPLICATIONS
Book Chapter FIRST UTM CORRESPONDING AUTHOR
2023
Perspective Chapter: Viscoelastic Mechanical Equivalent Models
BIOMIMETICS - BRIDGING THE GAP
Book Chapter UTM FIRST AUTHOR
2023
Influence Of Ultrasonication Time On The Various Properties Of Alkaline-Treated Mango Seed Waste Filler Reinforced Pva Biocomposite
REVIEWS ON ADVANCED MATERIALS SCIENCE
Publication In Web Of Science CO-AUTHOR
2023
Hybrid Synthetic And Natural Fibres In Honeycomb Sandwich Composite Structures For Structural Applications: A Brief Review
JOURNAL OF NATURAL FIBRE POLYMER COMPOSITES
Journal Article Non Citation-Indexed FIRST UTM CORRESPONDING AUTHOR
2023
Studies On Tensile Strength, Fracture Surface And Biodegradation Of Biocomposite From Polyvinyl Alcohol (Pva) Filled By Sugarcane Bagasse Fiber
JOURNAL OF FIBERS AND POLYMER COMPOSITES
Journal Article Non Citation-Indexed CO-AUTHOR
2023
Hybrid Kenaf Fibre/Fibreglass Meshes Reinforced Thermoplastic Abs Composites Based On Quasi-Isotropic Mechanism: A Brief Review
JOURNAL OF NATURAL FIBRE POLYMER COMPOSITES
Journal Article Non Citation-Indexed FIRST UTM CORRESPONDING AUTHOR
2023
A Mathematical Model Of Flexural-Creep Behaviour For Future Service Expectancy Of A Gfrp Composite Cross-Arm With The Influence Of Outdoor Temperature
FIBERS AND POLYMERS
Publication In Web Of Science UTM FIRST AUTHOR
2023
The Reduction Factor Of Pultrude Glass Fibre-Reinforced Polyester Composite Cross-Arm: A Comparative Study On Mathematical Modelling For Life-Span Prediction
MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2023
Recent Advances Of Gfrp Composite Cross Arms In Energy Transmission Tower: A Short Review On Design Improvements And Mechanical Properties
MATERIALS
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2023
Conceptual Design Of A Sustainable Bionanocomposite Bracket For A Transmission Tower’S Cross Arm Using A Hybrid Concurrent Engineering Approach
SUSTAINABILITY
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2023
Introduction To Bio-Based Packaging Materials
NANOCELLULOSE- REINFORCED THERMOPLASTIC STARCH COMPOSITES
Publication In Scopus CO-AUTHOR
2023
Lignocellulosic Sugar Palm Fibre-Reinforced Thermoplastic Composites: Mechanical, Thermal And Dynamic Mechanical Properties
FIBERS AND POLYMERS
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2023
Influence Of Woven Glass-Fibre Prepreg Orientation On The Flexural Properties Of A Sustainable Composite Honeycomb Sandwich Panel For Structural Applications
MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2023
Mechanical Properties Of Hybrid Lignocellulosic Fiber‑Reinforced Biopolymer Green Composites: A Review
FIBERS AND POLYMERS
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2023
Effect Of Cymbopogan Citratus Fibre On Physical And Impact Properties Of Thermoplastic Cassava Starch/Palm Wax Composites
POLYMERS
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2023
Unlocking The Potential Of Lignocellulosic Biomass Dragon Fruit (Hylocereus Polyrhizus) In Bioplastics, Biocomposites And Various Commercial Applications
POLYMERS
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2023
Experimental And Analytical Investigation Of Flexural Behavior Of Carbon Nanotube Reinforced Textile Based Composites
MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2023
Thermal Properties Of Oil Palm Lignocellulosic Fibre Reinforced Polymer Composites: A Comprehensive Review On Thermogravimetry Analysis
CELLULOSE
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR
2023
Buckling Analysis Of Cnt-Reinforced Polymer Composite Beam Using Experimental And Analytical Methods
MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2023
Nanocellulose‐Based Nanocomposites For Sustainable Applications: A Review
NANOMATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2022
Emerging Development Of Nanocelulose For High-End Applications
COMPOSITE SCIENCES AND TECHNOLOGY INTERNATIONAL CONFERENCE 2022 (COMSAT2022)
Proceedings UTM FIRST AUTHOR
2022
Mechanical Properties Of Sugar Palm Lignocellulosic Fibre Reinforced Polymer Composites: A Review
CELLULOSE
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Effect Of Stacking Sequence On Long-Term Creep Performance Of Pultruded Gfrp Composites
POLYMERS
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Morphological, Physical, And Mechanical Properties Of Sugar-Palm (Arenga Pinnata (Wurmb) Merr.)-Reinforced Silicone Rubber Biocomposites
MATERIALS
Publication In Web Of Science CO-AUTHOR
2022
Hyperelastic Properties Of Bamboo Cellulosic Fibre-Reinforced Silicone Rubber Biocomposites Via Compression Test
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
Publication In Web Of Science CO-AUTHOR
2022
Sugar Palm Fibre-Reinforced Polymer Composites: Influence Of Chemical Treatments On Its Mechanical Properties
MATERIALS
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Sizing Of An Island Standalone Hybrid System Considering Economic And Environmental Parameters: A Case Study
ENERGIES
Publication In Web Of Science UTM FIRST AUTHOR
2022
Improvements In The Engineering Properties Of Cementitious Composites Using Nano-Sized Cement And Nano-Sized Additives
MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2022
The Frontiers Of Functionalized Nanocellulose-Based Composites And Their Application As Chemical Sensors
POLYMERS
Publication In Web Of Science CO-AUTHOR
2022
Physical Properties Of Hybrid Sugar Palm Yarn Fibre/Woven Glass Fibre Reinforced Unsaturated Polyester Composites
JOURNAL OF NATURAL FIBRE POLYMER COMPOSITES
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2022
Synthetic And Natural Fiber-Reinforced Polymer Matrix Composites For Advanced Applications
MATERIALS
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Mechanical And Thermal Performance Of Sugar Palm Fibrethermoset Polymer Composites: A Short Review
JOURNAL OF NATURAL FIBRE POLYMER COMPOSITES
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2022
Properties Of Sugar Palm Fibre-Thermoplastic Biocomposites: An Overview
COMPOSITE SCIENCES AND TECHNOLOGY INTERNATIONAL CONFERENCE 2022 (COMSAT2022)
Proceedings CORRESPONDING AUTHOR
2022
Development Of Natural Fibre-Reinforced Polymer Composites Ballistic Helmet Using Concurrent Engineering Approach: A Brief Review
SUSTAINABILITY
Publication In Web Of Science CO-AUTHOR
2022

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
NG WEI KUAN
EFFECTS OF STACKING SEQUENCE ON MECHANICAL, FRACTURE AND IMPACT PROPERTIES OF HYBRID BAMBOO/GLASS FIBER COMPOSITES
PHD ON GOING CO-SUPERVISOR
AZRIENA HANINAH BINTI ABD AZIZ
INVESTIGATION OF PULPING AND STOCK PREPARATION METHODS ON OIL PALM FROND ANTIMICROBIAL PACKAGING PAPER
PHD ON GOING CO-SUPERVISOR
NURUL AINA BINTI ANAHAR
DEVELOPMENT OF A NEW DESIGN OF AIRCRAFT RADOME USING COMPOSITE BASED ON BIOMIMETICS APPROACH WITH ENHANCED IMPACT PROPERTIES
MASTER ON GOING SUPERVISOR
MUHAMMAD FITRI BIN MUHAMAD FAUZI
QUASI STATIC INDENTATION OF HYBRID KENAF FIBRE/FIBREGLASS MESHES REINFORCED THERMOPLASTIC ABS COMPOSITES BASED ON QUASI-ISOTROPIC LAY-UP SEQUENCE
MASTER ON GOING SUPERVISOR