GRANT(PI & MEMBERS)

49

PUBLICATIONS

113

INDEXED PUBLICATION

62

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

INDUSTRY GRANTS
2
NATIONAL GRANTS
5
UNIVERSITY FUND
9
TOTAL

Publications

INDEXED PUBLICATION
62
NON-INDEXED PUBLICATION
12
OTHERS PUBLICATION
39
TOTAL

Supervisions

MASTER
13
PHD
10
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
Analysis of the Effect of Plasma Cutting Parameters on Surface Morphology of Stainless Steel and Mild Steel
TTMC SDN. BHD. Contract
2022
Cold Plasma Treatment of Oyster Mushroom Mycelium for Sustainable Soil Bioremediation
POST DOCTORAL FELLOWSHIP Professional Development Research University
2022
Integrasi Penanaman Daun Madre de Agua Pembuatan Palet untuk Kelestarian Penternakan Melalui Penglibatan Masyarakat Setempat
KEMENTERIAN SAINS, TEKNOLOGI DAN INOVASI (MOSTI) Centre for Community and Industry Network
2022
Analysis the Effect of Plasma Cutting Parameters on Surface Morphology of Stainless Steel and Mild Steel
TTMC SDN. BHD. Contract
2021
REFRIGERATION & HVAC TECHNOLOGIES AND REFRIGERANT MANAGEMENT
RUG OF UTM Industry-International Incentive Grant
2021
LOW TEMPERATURE PLASMA INTERACTION MECHANISM OF MUSHROOM SPAWN TREATMENT AND MICROORGANISM INACTIVATION
Fundamental Research Grant Scheme
2020
PEMPROSESAN DAUN MADRE DE AGUA UNTUK KELESTARIAN TERNAKAN AYAM
RESEARCH UNIVERSITY GRANT Business Entity
2020
DIRECT LIGHT PROCESSING 3D/4D PRINTING OF MICROCAPSULE-BASED SELF-HEALING UV-CURABLE EPOXY
RUG OF UTM UTM Encouragement Research
2020
Design and Development of Eco-Friendly Silica - Alumina Hybrid Flame Retardant for Commodity Plastics
RUG OF UTM Professional Development Research University
2020
UTMIcon 1.3: Characterization of Functionally Graded Alloy (FGA)
RUG OF UTM UTM RA ICONIC GRANT
2020
NEW PLASMA SYSTEM FOR TREATMENT OF MICRO-ORGANISMS IN MUSHROOM SPAWN
RUG OF UTM UTM Prototype Research
2020
CRG 26.3: CHARACTERIZATION, ANALYSIS & TESTING OF THE PLASMA COATING
UNIVERSITI KUALA LUMPUR Collaborative Research Grant National
2019
KTP-NMG 2019:PLASMA TREATMENT TOWARDS THE MUSHROOMS SPAWN AND SUBSTRAT
RUG OF UTM Business Entity
2019
UTM-TDR 10.3 (T2):POLYMER COMPOSITE COATING ONTO STEEL WIRE ROPE
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 10: NEW GENERATION MATERIALS WITH ULTRAHIGH PERFORMANCE FOR HIGH IMPACT INDUSTRIES
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 10.2 (T1): Fretting Wear Damage Model for Fatigue Life Prediction of Steel Wire Ropes
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTILIZATION OF PHRAGMITES AS A SUBSTRATE FOR THE CULTIVATION OF EDIBLE OYSTER MUSHROOM
RUG OF UTM Industry-International Incentive Grant
2018
SURFACE CLEANING AND CERAMIC COATING PROCESS USING GAS TUNNEL TYPE PLASMA SPRAYING
RUG OF UTM Tier 1
2017
Frontal and rollover simulation of light weight bus superstructure
RUG OF UTM Tier 1
2017
THE KINETIC OF ZN-AL-MG COATING GROWTH ON ALLOY STEEL FOR OFFSHORE MOORING AND CRANE ROPE FACILITIES
RUG OF UTM Tier 1
2017
Oxidation Mechanism of Metal Coatings by Gas Tunnel Type Plasma Spraying
Fundamental Research Grant Scheme
2015
Thermal spray coated cobalt-chromium-molybdenum loaded with silver nanoparticles for medical implants
Fundamental Research Grant Scheme
2015
SIMPLE CHEMICAL VAPOR DEPOSITION SETUP FOR GRAPHENE FABRICATION.
RUG OF UTM Potential Academic Staff
2015
Mechanical and Thermal Performance of Maerogel-Based Insulation Layer For Polymeric Composite Materials
RUG OF UTM Tier 1
2015
Interfacial Reaction between Silicon wafer, Underlayers and Cu-Interconnection Filler of Through-Silicon Via (TSV)
Fundamental Research Grant Scheme
2014
STEEL COATED WITH POLYMER BY CO-EXTRUSION PROCESS FOR OFFSHORE APPLICATIONS.
RUG OF UTM Matching Grant
2014
Performance Evaluation and Modelling of Cold Metal Transfer Hybrid Joint
Fundamental Research Grant Scheme
2014
Fundamental study on ceramic material coated in the inner passage of adiabatic turbocharger turbine in automotive engine.
Fundamental Research Grant Scheme
2014
Experimental analysis on the ceramic materials used for Turbocharger Turbine Volute Casing of Automotive Internal Combustion Engine (ICE)
RUG OF UTM Tier 1
2014
ADIABATIC TURBOCHARGER TURBINE THROUGH INTERNAL CERAMIC COATING - TO INCREASE TURBOCHARGER EFFICIENCY THROUGH WASTE HEAT UTILIZATION
RUG OF UTM Flagship
2014
ATOMIC BONDING OF STEEL WIRE AND POLYMER
KISWIRE SDN. BHD. Contract
2013
Damage Mechanics-Based Methodology for Reliability Assessment of Through-Silicon Via (TSV) Interconnects
COLLABORATIVE RESEARCH IN ENGINEERING, SCIENCE & TECHNOLOGY CENTER (CREST) Non Goverment Agency
2013
METHODOLOGY FOR FATIGUE LIFE IMPROVEMENT OF STEEL CABLES AND WIRE ROPES
KISWIRE SDN. BHD. Contract
2013
ELECTRODEPOSITION OF INTERMETALLIC NICKEL ALUMINIDE NANOPARTICLES SYNTHESIS USING CHEMICHAL REDUCTION APPROACH
RUG OF UTM Tier 1
2012
Development of Maerogel coating on metal substrate for high temperature applications
RUG OF UTM Tier 1
2012
Developing Sustainable Binder for Metal Injection Molding using Recycle Materials
RUG OF UTM Tier 2
2012
New Mechanisms for Moisture-Induced Oxidation-Creep of Austenitic Stainless Steel Foils at Elevated Temperatures
Fundamental Research Grant Scheme
2012
NEW MECHANISM OF FATIGUE FOR MARTENSITIC STEEL TURBINE BLADES WITH CORROSION PITS
Fundamental Research Grant Scheme
2012
DEVELOPMENT OF SILICON OXIDE BASED COATINGS FOR FOULING CONTROL IN LN LNG CARRIER
RUG OF UTM Flagship
2011
Study of a Novel Traditional Ceramic Membrane By Gel Casting
RUG OF UTM Tier 2
2011
NANOSCALE INTERFACIAL INVESTIGATION OF DIAMOND COATING ON STAINLESS STEEL SUBSTRATE USING HOT FILAMENT CHEMICAL VAPOUR DEPOSITION
RUG OF UTM Tier 2
2011
Unified Methodology for Damage Assessment of Structural Composites
RUG OF UTM Tier 1
2011
Fabrication and Characterization of Electroconductive Silicon Nitride - Titanium Nitride Composites
NEW ACADEMIC STAFF New Academic Staff
2011
Development of a Novel Ceramic Membrane for Water Treatment
Short Term
1996
Development of Experimental Simulation Method for Thermal Dissipation in Electronic Components
Short Term
1996
Development And Performance Evaluation Of SiC/A1 Metal Matrix Composites For Automotive Engine Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1995

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Modifying Commercial Water-Based Acrylic Paint With Rice Husk-Derived Silica Aerogel Fillers For Building Thermal Insulation
PROGRESS IN ORGANIC COATINGS
Publication In Web Of Science CO-AUTHOR
2025
Optimizing Neural Network Model For Accurate Prediction Of Thermal History During Laser Direct Energy Deposition Of Ti-6al-4v
THE ENGINEER STORY
Publication In Academic And Profesional Magazine UTM FIRST AUTHOR
2024
Effect Of Cold Plasma Voltage And Treatment Duration On The Microstructure And Hydrophilicity Of Mushroom Grain Spawn
EVERGREEN
Publication In Scopus FIRST UTM CORRESPONDING AUTHOR
2024
Evaluating Ti-6al-4v For Laser Direct Energy Deposition: Insights From Powder Metallurgy Techniques
INTERNATIONAL JOURNAL FOR RESEARCH IN APPLIED SCIENCE & ENGINEERING TECHNOLOGY
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2024
Neural Network Prediction Of Thermal Field Spatiotemporal Evolution During Additive Manufacturing: An Overview
THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Publication In Web Of Science CO-AUTHOR
2024
Characterisation Of Thin Α-Al2o3 Tribo-Coating Deposited By Low-Power Gas Tunnel Plasma Spray
MATERIALS SCIENCE AND TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR
2023
Thermogravimetric Behavior Of Mesoporous Hydrated Silica-Alumina Trihydrate Hybrid Powder Synthesized By Sol–Gel/Doping Method
MATERIALS LETTERS
Publication In Web Of Science CO-AUTHOR
2023
Machine Learning Applications In Metal Additive Manufacturing: A Review
AMERICAN JOURNAL OF ENGINEERING RESEARCH
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2023
Preparation And Characterization Of A Clay-Based Ceramic Membrane For Tannery Wastewater Treatment
JOURNAL OF ADVANCED RESEARCH IN APPLIED SCIENCES AND ENGINEERING TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2023
A Comparison Between The Effects Of Hydrophobic And Hydrophilic Silica Aerogel Fillers On Tensile And Thermal Properties Of Unsaturated Polyester Composites
POLYMER BULLETIN
Publication In Web Of Science CO-AUTHOR
2022
Taxonomy On The Production Processes And Characterization Of Powder Metallurgy Used In Additive Manufacturing Process
NAUKOVYI VISNYK NATSIONALNOHO HIRNYCHOHO UNIVERSYTETU
Publication In Scopus CORRESPONDING AUTHOR
2022
Thermal Insulation Performance Of Silicone Rubber / Silica Aerogel Composite
: MATERIALS CHEMISTRY AND PHYSICS
Publication In Web Of Science UTM FIRST AUTHOR
2022
Cold Plasma: A Potential Alternative For Rice Grain Postharvest Treatment Management In Malaysia
RICE SCIENCE
Publication In Web Of Science CO-AUTHOR
2022
Effects Of Silane Concentration On Hydrophobic Conversion Of Rice Husk-Derived Silica Aerogels Prepared By Supercritical Drying
BIOMASS CONVERSION AND BIOREFINERY
Publication In Web Of Science UTM FIRST AUTHOR
2022
Effect Of Simultaneous Addition Of Ba And Sb On Microstructural And Phase Reaction Characteristics Of Al-20mg2si Alloy
29TH SCIENTIFIC CONFERENCE OF MICROSCOPY SOCIETY OF MALAYSIA (SCMSM2021),
Conference Paper CORRESPONDING AUTHOR
2021
Treatment Of Spent Engine Oil Contaminated Soil Utilizing Spent Mushroom Compost And Effective Microorganisms
23RD CROSS STRAIT SYMPOSIUM ON ENERGY AND ENVIRONMENTAL SCIENCE AND TECHNOLOGY
Conference Paper CORRESPONDING AUTHOR
2021
Effect Of Cold Plasma Voltage And Treatment Duration To The Microstructure And Hydrophilicity Of Mushroom Grain Spawn
7TH INTERNATIONAL CONFERENCE ON SAVING ENERGY FOR REFRIGERATION AND AIR CONDITIONING (ICSERA)
Conference Paper CORRESPONDING AUTHOR
2021
Influence Of Barium Addition On The Formation Of Primary Mg2si Crystals From Al-Mg-Si Melts
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY
Publication In Web Of Science CO-AUTHOR
2021
Experimental Investigation Of The Effect Of Temperature On The Density Of Kaolin Clay
MATERIALS TODAY: PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2021
Additive Manufacturing: A Layered Taxonomy And Classification For Material Engineering Process
MATERIALS SCIENCE FORUM
Publication In Scopus CORRESPONDING AUTHOR
2021
Sayong Ball Clay Membrane For Copper And Nickel Removal From Effluent
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CORRESPONDING AUTHOR
2021
Torrefaction Of Palm Kernel Shell And Petcoke Blends For Various Mixing Ratios And Temperatures
ANNALES DE CHIMIE - SCIENCE DES MATÉRIAUX
Publication In Web Of Science CO-AUTHOR
2021
Emerging Cold Plasma Treatment On Rice Grains: A Mini Review
CHEMOSPHERE
Publication In Web Of Science CO-AUTHOR
2021
Rapid Surface Treatment Of Grey Cast Iron For Reduction Of Friction And Wear By Alumina Coating Using Gas Tunnel Plasma Spray
MATERIALS CHEMISTRY AND PHYSICS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Effect Of Nano-Hydroxyapatite (N-Hap)/Pla Scaffold Composites On Porosity And Microstructure
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2020
Air Temperature Measurement And Monitoring Inside Cold Plasma Treatment Reactor For Steel Wire Surface Cleaning Using Fiber Bragg Grating (Fbg)
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR
2020
Development Of Simultaneous Substrate Mixer And Cold Atmospheric Plasma Treatment For Mushroom Cultivation
AIP Conference Proceedings
Publication In Scopus CO-AUTHOR
2020
Effect Of Silica Aerogel - Aluminium Trihydroxide Hybrid Filler On The Physio-Mechanical And Thermal Decomposition Behaviour Of Unsaturated Polyester Resin Composite
POLYMER DEGRADATION AND STABILITY
Publication In Web Of Science CO-AUTHOR
2020
Microstructural Characterization, Solidification Characteristics And Tensile Properties Of Al-15 Mg2si-X(Gd-Sb) In-Situ Composite
Journal of Materials Research and Technology-
Publication In Web Of Science CO-AUTHOR
2020
Influence Of Firing Temperature On The Physical, Thermal And Microstructural Properties Of Kankara Kaolin Clay: A Preliminary Investigation
MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2020
Spawn Treatment By Cold Plasma For Increase Mushroom Germination And Production
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR
2020
Torrefaction Of Briquettes Made Of Palm Kernel Shell With Mixture Of Starch And Water As Binder
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR
2020
Characterization And Microstucture Analysis Of Alumina Coating By Gas Tunnel Plasma Spray
28TH SCIENTIFIC CONFERENCE OF THE MICROSCOPY SOCIETY MALAYSIA (28TH SCMSM)
Conference Paper CORRESPONDING AUTHOR
2019
Effect Of Milling Time On The Performance Of Ceramic Membrane From Ball Clay For The Treatment Of Nickel Plating Wastewater
Journal of the Australian Ceramic Society
Publication In Web Of Science CORRESPONDING AUTHOR
2019
Preparation Of Porous Ceramic Membranes From Sayong Ball Clay
JOURNAL OF ASIAN CERAMIC SOCIETIES
Publication In Web Of Science UTM FIRST AUTHOR
2019
Design And Development Of Cold Plasma Treatment System On Grains Of Foods
CONFERENCE ON THEORETICAL PHYSICS AND NONLINEAR PHENOMENA
Conference Paper CORRESPONDING AUTHOR
2019
Sterilization Of Mushroom Soil By Using Non-Thermal Plasma
INTERNATIONAL CONFERENCE ON MATERIALS RESEARCH AND DEVELOPMENT
Conference Paper CORRESPONDING AUTHOR
2018
Chemical Cleaning Of Microfiltration Ceramic Membrane Fouled By Nom
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2018
Education Level, Working Experiences And Ergonomics Training Effect On Ergonomics Awareness And Practices In Malaysia
INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY(UAE)
Publication In Scopus CO-AUTHOR
2018
Study And Fabrication Of Cold Plasma Treatment For Mushrooms Spawn
INTERNATIONAL CONFERENCE ON MATERIALS RESEARCH AND DEVELOPMENT
Conference Paper CORRESPONDING AUTHOR
2018
Gas Tunnel Type Plasma System For Clay Coating
JOURNAL OF TRANSPORT SYSTEM ENGINEERING
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2018
Bio-Corrosion Behavior And Mechanical Characteristics Of Magnesium-Titania-Hydroxyapatite Nanocomposites Coated By Magnesium-Oxide Flakes And Silicon For Use As Resorbable Bone Fixation Material
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
Publication In Web Of Science CO-AUTHOR
2018
Activity Reduction Of 232th And 40k From Simulated Underground Water Using A Clay-Based Membrane
INTERNATIONAL CONFERENCE ON CIVIL, OFFSHORE & ENVIRONMENTAL ENGINEERING 2018 (ICCOEE2018)
Conference Paper UTM FIRST AUTHOR
2018
A Comparative Study Of Nanocrystalline Sic Thin Films On Multimode Optical Fiber Sensors, Synthesized Via Dbd-Ntp And 150 Mhz Vhf-Pecvd
CERAMICS INTERNATIONAL
Publication In Web Of Science CO-AUTHOR
2018
Integration And Fabrication Of The Cheap Ceramic Membrane Through 3d Printing Technology
MATERIALS TODAY COMMUNICATIONS
Publication In Web Of Science CO-AUTHOR
2018
In Vitro Biocorrosion, Antibacterial And Mechanical Properties Of Silicon-Containing Coatings On The Magnesium-Hydroxiapatite Nanocomposite For Implant Applications
MATERIALS CHEMISTRY AND PHYSICS
Publication In Web Of Science CO-AUTHOR
2018
Effect Of Hot Extrusion On Microstructural Evolution And Tensile Properties Of Al-15%Mg2si-Xgd In-Situ Composites
JOURNALS OF ALLOYS AND COMPOUNDS
Publication In Web Of Science CO-AUTHOR
2018
Effect Of Gadolinium Addition On Microstructural Evolution And Solidification Characteristics Of Al-15%Mg2si In-Situ Composite
MATERIALS CHARACTERISATION
Publication In Web Of Science CO-AUTHOR
2018
Effect Of Cooling Rates On Morphology Evolution Of Primary Mg2si In Alã¢Â€Â“15mg2siã¢Â€Â“0.3ba In-Situ Composite
27TH SCIENTIFIC CONFERENCE OF MICROSCOPY SOCIETY MALAYSIA
Conference Paper CORRESPONDING AUTHOR
2018
A Simultaneous Non-Thermal Plasma Temperature And Pressure Measurement Using Fiber Bragg Grating
PLASMA APPLICATION AND HYBRID FUNCTIONALLY MATERIALS
Proceedings CO-AUTHOR
2017
Fabrication And Characterization Of Multimode Optical Fiber Sensor For Chemical Temperature Monitoring Using Optical Time Domain Reflectometer
KARBALA INTERNATIONAL JOURNAL OF MODERN SCIENCE
Journal Article Non Citation-Indexed CO-AUTHOR
2017
Application Of Sayong Ball Clay Membrane Filtration For Ni(Ii) Removal From Industrial Wastewater
JOURNAL OF TAIBAH UNIVERSITY FOR SCIENCE
Publication In Web Of Science CO-AUTHOR
2017
Biodegradable Mg/Ha/Tio2 Nano Composites Coated With Mgo And Si/Mgo For Orthopedic Applications: A Study On The Corrosion, Surface Characterization, And Biocompatability
COATINGS
Publication In Web Of Science CO-AUTHOR
2017
Recent Advances In 3d Printing Of Porous Ceramics: A Review
CURRENT OPINION IN SOLID STATE AND MATERIALS SCIENCE
Publication In Web Of Science CO-AUTHOR
2017
In Vitro Biodegradation, Electrochemical Corrosion Evaluations And Mechanical Properties Of An Mg/Ha/Tio2 Nanocomposite For Biomedical Applications
JOURNAL OF ALLOYS AND COMPOUNDS
Publication In Web Of Science CO-AUTHOR
2017
Evaluation Of Mechanical And Electrochemical Properties Of Fha-Coated Co-Cr Implant
SURFACE INNOVATIONS
Publication In Web Of Science CO-AUTHOR
2017
Heat Resistant And Tensile Properties Of Glass Fiber Reinforced Polymer Composites
JURNAL TEKNOLOGI
Publication In Web Of Science CORRESPONDING AUTHOR
2017
Mesoporosity, Thermochemical And Probabilistic Failure Analysis Of Fired Locally Sourced Kaolinitic Clay
JOURNAL OF THE ASSOCIATION OF ARAB UNIVERSITIES FOR BASIC AND APPLIED SCIENCES
Publication In Scopus CORRESPONDING AUTHOR
2017
Effect Of Sintering On The Morphology And Adhesion Strength Of Eggshell Coating On Mild Steel
SOLID STATE PHENOMENA
Publication In Scopus CO-AUTHOR
2017
Effect Of Sintering Temperature On Adhesion And Corrosion Performance Of Eggshell Coated Onto Mild Steel
25TH SCIENTIFIC CONFERENCE OF THE MICROSCOPY SOCIETY MALAYSIA (25TH SCMSM 2016)
Conference Paper CO-AUTHOR
2016
Development Of Cold Plasma Discharge System For Metal Surface Cleaning
CONFERENCE JOURNAL OF THE 23RD MEETING OF IAPS 2016 - PLASMA APPLICATION &HYBRID FUNCTIONALLY MATERIALS
Journal Article Non Citation-Indexed CO-AUTHOR
2016
Reactor Temperature Profiles Of Non-Thermal Plasma Reactor Using Fiber Bragg Grating Sensor
SENSORS AND ACTUATORS, A: PHYSICAL
Publication In Web Of Science CO-AUTHOR
2016
Preparation And Characterization Of A Nigerian Mesoporous Clay-Based Membrane For Uranium Removal From Underground Water
CERAMICS INTERNATIONAL
Publication In Web Of Science CORRESPONDING AUTHOR
2016
Microstructural Evaluation Of A Slurry Based Ni/Ysz Thermal Barrier Coating For Automotive Turbocharger Turbine Application
MATERIALS AND DESIGN
Publication In Web Of Science CO-AUTHOR
2016
Comparison Of Weibull And Normal Probability Distribution Of Flexural Strength Of Dense And Porous Fired Clay
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2016
The Role Of Titania On The Microstructure, Biocorrosion And Mechanical Properties Of Mg/Ha-Based Nanocomposites For Potential Application In Bone Repair
CERAMICS INTERNATIONAL
Publication In Web Of Science CO-AUTHOR
2016
Clay Based Membrane For Microfiltration Of Nickel And Copper In Water
1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016
Conference Paper CORRESPONDING AUTHOR
2016
Adhesive Bonding Of Thermoplastic Polyurethane With Metallic Wire
INTERNATIONAL CONFERENCE ON SCIENCE, ENGINEERING, MANAGEMENT AND SOCIAL SCIENCES (ICSEMSS)
Conference Paper CORRESPONDING AUTHOR
2016
Theoretical Approach Of Copper Nanolayer Surface Plasmon Resonance Sensor
4TH MALAYSIA 2D MATERIALS AND CARBON NANOTUBE WORKSHOP (2DMC2016)
Conference Paper CO-AUTHOR
2016
Modelling Of Cold Plasma For Metal Surface Cleaning
FRONTIER OF APPLIED PLASMA TECHNOLOGY
Journal Article Non Citation-Indexed CO-AUTHOR
2016
Removal Of Heavy Metal From Wastewater: A Review Of Current Treatment Processes
JOURNAL OF ADVANCED REVIEW ON SCIENTIFIC RESEARCH
Journal Article Non Citation-Indexed CO-AUTHOR
2016
Effect Of Education Level, Working Experiences And Ergonomics Training On Ergonomics Awareness And Practices In Malaysia
4TH SCIENTIFIC CONFRENCE ON OCCUPATIONAL SAFETY AND HEALTH (SCICOSH) 2016
Conference Paper CO-AUTHOR
2016
Plasma Surface Cleaning And Coating By Using Graphene Electrode
4TH MALAYSIA 2D MATERIALS AND CARBON NANOTUBE WORKSHOP
Conference Paper CORRESPONDING AUTHOR
2016
Optimization Metal Surface Cleaning With Plasma By Using Graphene Electrode
4TH MALAYSIA 2D MATERIALS AND CARBON NANOTUBE WORKSHOP
Conference Paper CO-AUTHOR
2016
Mechanism Of Spark Plasma Sintering Of Shirasu Balloons
KYUSHU AREA, 3RD TECHNICAL CONFERENCE AND SEMINAR
Conference Paper UTM FIRST AUTHOR
2016
Thermal Conductivity And Specific Heat Capacity Of Different Compositions Of Yttria Stabilized Zirconia-Nickel Mixtures
ADVANCED MATERIALS RESEARCH
Proceedings CO-AUTHOR
2015
Fatigue Characteristics Of Dual-Phase Steel Sheets
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
Publication In Web Of Science CO-AUTHOR
2015
A Comparative Study Of Porous Support From Sayong And Kankara Clay
3RD INTERNATIONAL CONFERENCE ON WATER RESOURCES (ICWR 2015)
Conference Paper CORRESPONDING AUTHOR
2015
Effect Of Sicp Weight Fraction On Microstructure And Impact Behavior Of Compocast A356/Xsicp Composites
4TH INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING TECHNOLOGY (ICAMT2015)
Conference Paper CO-AUTHOR
2015
Evaluation Of The Effect Of Sicp Ratio On Microstructural And Dry Sliding Wear Behavior Of A356/Xsicp Composites
4TH INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING TECHNOLOGY
Conference Paper CORRESPONDING AUTHOR
2015
Electroless Ni-P Deposition By Using Organic Solvent
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2015
Clay Based Ceramic Membrane For Heavy Metal Removal From Effluent Lake Water
13TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING
Conference Paper CORRESPONDING AUTHOR
2015
Comparison Of Three-Parameter Weibull Statistical Analysis Of The Flexural Strength Of Denseband Porous Sintered Clay
2ND INTERNATIONAL MATERIALS, INDUSTRIAL AND MANUFACTURING ENGINEERING CONFERENCE (MIMEC2015)
Conference Paper UTM FIRST AUTHOR
2015
Flexural Strength Analysis Of Dense And Porous Sintered Clay Using Weibull Probability Distribution
APPLIED MECHANICS AND MATERIALS
Proceedings CORRESPONDING AUTHOR
2015
Reliability Analysis Of Three Point Bending Strength Of Porous Sintered Clay
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2015
A Three Parameter Weibull Of Flexural Strength Variation Of Porous Sintered Clay
WORLD SCIENTIFIC AND ENGINEERING ACADEMY AND SOCIETY CONFERENCE
Conference Paper CORRESPONDING AUTHOR
2015
Application Of Clay And Volcanic Glass As Membranes For The Filtration Of Waste Water
SANKEI SCIENCE FOUNDATION 2014 RESEARCH REPORT
Clasified/Technical Report UTM FIRST AUTHOR
2014
The Effect Of Organic Solvent (Ethanol) On Electroless Ni-P Deposition
6TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCES, IEMT
Proceedings CORRESPONDING AUTHOR
2014
Flexural Strength Analysis Of Dense And Porous Mullite Ceramic Using Weibull Probability Distribution
3RD INTERNATIONAL CONFERENCES ON DESIGN AND CONCURRENT ENGINEERING (IDECON 2014)
Conference Paper CORRESPONDING AUTHOR
2014
Effect Of Current On Characteristic For 316 Stainless Steel Welded Joint Including Microstructure And Mechanical Properties
12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING
Conference Paper CO-AUTHOR
2014
Review On Ceramic Application In Automotive Turbocharged Engines
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2014
Influence Of Carbon Content On The Mechanical Properties Of Ultra-High Strength Of Coated Steel Wire
Jurnal Teknologi (Sciences & Engineering)
Publication In Scopus CORRESPONDING AUTHOR
2014
Effect Of Starch Addition On Microstructure And Strength Of Ball Clay Membrane
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING)
Publication In Scopus CORRESPONDING AUTHOR
2014
Glycerol As Plasticizer For Waste Polystyrene Based Metal Injection Molding (Mim) Binder
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2014
Characterization Of Nigerian Clay As Porous Ceramic Material
ADVANCED MATERIALS RESEARCH
Publication In Scopus CORRESPONDING AUTHOR
2014
Study On Fabrication Of Ceramic Membrane For Water Filtration
ADVANCED MATERIALS RESEARCH
Publication In Scopus CORRESPONDING AUTHOR
2013
Mechanical Properties Of Stabilized Zirconia Nanocrystalline Eb-Pvd Coating Evaluated By Micro And Nano Indentation
JOURNAL OF ADVANCED CERAMICS
Journal Article Non Citation-Indexed CO-AUTHOR
2013
Characterization And Modification Of Mesoporous Silica Nanoparticles Prepared By Sol Gel Method
JOURNAL OF NANOPARTICLES
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2013
Fatigue Characteristics Of Dual Phase Steel Sheets
9th International Conference on Fracture & Strength of Solids
Proceedings CO-AUTHOR
2013
Effect Of Sintering Temperature On Membrane Properties Of Sayong Ball Clay
Applied Mechanics and Materials Journal
Publication In Scopus CORRESPONDING AUTHOR
2013
Low-Temperature-Sintering Of Shirasu-Balloon Powders By Using Spark-Plasma-Sintering (Sps) Method
66th conference of JSME (Japan Society of Mechanical Engineers), Kyushu Branch
Conference Paper UTM FIRST AUTHOR
2013
Fabrication And Characterization Of Ceramic Membrane By Gel Cast Technique For Water Filtration
Advanced Materials Research
Publication In Scopus CORRESPONDING AUTHOR
2013
Densification And Mechanical Properties Of Electroconductive Si3n4 -Based Composites Prepared By Spark Plasma Sintering
SAINS MALAYSIANA
Publication In Web Of Science CORRESPONDING AUTHOR
2012
Microstructure And Mechanical Properties Of Silicon Nitride-Titanium Nitride Composites Prepared By Spark Plasma Sintering
MATERIALS RESEARCH BULLETIN
Publication In Web Of Science UTM FIRST AUTHOR
2011
Properties Of Si3n4-Tin Composites Fabricated By Spark Plasma Sintering By Using A Mixture Of Si3n4 And Ti Powders
CERAMICS INTERNATIONAL
Publication In Web Of Science UTM FIRST AUTHOR
2010
Characterization Of Si3n4 - Tin Composites Prepared By Spark Plasma Sintering
Transaction of the materials research society of Japan
Publication In Web Of Science CORRESPONDING AUTHOR
2009
Development Of Si3n4 - Tin Composites By Using Sps
Proceeding for the Japan society of heat treatment
Conference Paper CO-AUTHOR
2009
Electroconductive Silicon Nitride - Titanuim Nitride Composites Produced By Spark Plasma Sintering
3rd powder metallurgy symposium & exhibition
Conference Paper CORRESPONDING AUTHOR
2009
Kesan Bahan Mangkin Ke Atas Proses Pengawetan Resin Isopoliester Dalam Penghasilan Komposit Matrik Polimer
jurnal mekanikal
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2004
Penubuhan Dan Pengurusan Kolej Luar ; Pengalaman Universiti Teknologi Malaysia
Seminar pengurusan asrama
Conference Paper CORRESPONDING AUTHOR
2001
Kaca
Ensiklopedia Sains dan teknologi (Kejuruteraan Mekanikal)
Book Chapter INDIVIDUAL AUTHOR
2000
Mikrometer
Ensiklopedia Sains Dan teknologi (Kejuruteraan Mekanikal)
Book Chapter INDIVIDUAL AUTHOR
2000
Mikroskop Elektron Imbasan
Ensiklopedia Sains dan Teknologi (Kejuruteraan Mekanikal)
Book Chapter INDIVIDUAL AUTHOR
2000

Legend : IP CATEGORY IP LEVEL

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
MAISARAH BINTI MOHAMED BAZIN
CLAY AND SHIRASU ASH MICROFILTRATION MEMBRANE FOR WASTE WATER TREATMENT
PHD GRADUATED SUPERVISOR 2015
MU'AZU ABUBAKAR
FABRICATION AND STRENGTH ANALYSIS OF CLAY-BASED MESOPOROUS MEMBRANE
PHD GRADUATED SUPERVISOR 2015
MUHAMMAD RABIU ABBAS
FABRICATION AND ANALYSIS OF YTTRIA-STABILIZED ZIRCONIA-NICKEL AS THERMAL BARRIER COATING FOR AUTOMOTIVE TURBOCHARGER VOLUTE CASING
PHD GRADUATED CO-SUPERVISOR 2016
HAMIDREZA GHANDVAR
EFFECT OF GADOLINIUM, ANTIMONY AND HOT EXTRUSION ON MICROSTRUCTURE EVOLUTION AND TENSILE PROPERTIES OF AL-15% MG2SI IN-SITU COMPOSITE
PHD GRADUATED CO-SUPERVISOR 2018
NURHANNA BINTI MOHD ZAIDAN
WATER FILTRATION PERFORMANCE COMPARISON OF SAYONG BALL CLAY MEMBRANE PRODUCED BY GEL CASTING AND SPARK PLASMA SINTERING METHODS
PHD GRADUATED SUPERVISOR 2020
MUHAMMAD THALHAH BIN ZAINAL
MULTI-SCALE MODELLING ON THE EFFECTS OF FLAME PARAMETERS ON CARBON NANOTUBE GROWTH IN NON-PREMIXED FLAMES
PHD GRADUATED CO-SUPERVISOR 2021
LINDA ANAK AGUN
INDIGENOUS CONTINUOUS COLD PLASMA SYSTEM FOR GROWTH ENHANCEMENT OF OYSTER MUSHROOM SPAWN INOCULATION PROCESS
PHD GRADUATED SUPERVISOR 2024
MUHAMAD NOR FIRDAUS BIN ZAINAL
DESIGN AND DEVELOPMENT OF CONTINUOUS STEEL CLEANING AND SURFACE MODIFICATIONS BY USING COLD PLASMA
PHD ON GOING CO-SUPERVISOR
ONUCHUKWU GODWIN CHIKE
NEURAL NETWORK-BASED PREDICTION OF THE EVOLUTION OF THERMAL HISTORY AND PHASE TRANSITIONS DURING LASER DIRECT ENERGY DEPOSITION OF TI-6AL-4V.
PHD ON GOING CO-SUPERVISOR
MOHD FADTHUL IKMAL BIN MISNAL
EMERGING COLD PLASMA TREATMENT ON RICE GRAINS
PHD ON GOING CO-SUPERVISOR
FONG KOK WENG
TRIBOLOGICAL PROPERTIES OF CHROMIUM OXIDE AND PARTIALLY STABILIZED ZIRCONIA COATINGS FOR RECIPROCATING MECHANISM
MASTER GRADUATED CO-SUPERVISOR 2006
NAVID MOSLEMI
RATCHETING ASSESSMENT OF AISI 316L STAINLESS STEEL WELDED PIPE JOINT
MASTER GRADUATED CO-SUPERVISOR 2013
FATIMAH MOHAMMED KADHIM

MASTER GRADUATED CO-SUPERVISOR 2014
NURUL NADZIRAH BINTI ISMAIL
WASTE POLYSTYRENE AS A BACKBONE FOR METAL INJECTION MOLDING BINDER
MASTER GRADUATED SUPERVISOR 2015
TIJJANI ABDULLAHI

MASTER GRADUATED SUPERVISOR 2015
LIM CHIN HWA

MASTER GRADUATED SUPERVISOR 2015
NOOR LIYANA BINTI MAZENI

MASTER GRADUATED SUPERVISOR 2016
SITI MUHADISA BINTI SUHAIMI

MASTER GRADUATED SUPERVISOR 2016
SITI FAWZIAH BINTI MOHD NOOR
INSTILLING A STRONG SAFETY CULTURE AMONG UNIVERSITY’S STAFF THROUGH EFFECTIVE LEADERSHIP
MASTER GRADUATED SUPERVISOR 2016
NURUL NABILA BINTI MOHD DIN
A ROBUST SUPERHYDROPHOBIC NANOCOMPOSITE COATING FOR  PREVENTING MARINE ATMOSPHERIC CORROSION ON CARBON STEEL IN OIL AND GAS  INDUSTRIES.
MASTER GRADUATED SUPERVISOR 2022
LIM ZHI XIAN
EFFECT OF PLASMA ARC CUTTING PROCESS PARAMETERS ON THE PROPERTIES OF S235 STEEL & 304 STAINLESS STEEL. 
MASTER ON GOING CO-SUPERVISOR