GRANT(PI & MEMBERS)

94

PUBLICATIONS

269

INDEXED PUBLICATION

202

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

INDUSTRY GRANTS
1
INTERNATIONAL GRANTS
2
NATIONAL GRANTS
10
UNIVERSITY FUND
11
TOTAL

Publications

INDEXED PUBLICATION
202
NON-INDEXED PUBLICATION
16
OTHERS PUBLICATION
51
TOTAL

Supervisions

DEGREE
0
MASTER
18
PHD
26
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
PERFORMANCE EVALUATION OF NOVEL PREPACKED AGGREGATE CONCRETE REINFORCED WITH WASTE POLYPROPYLENE FIBRES
RUG OF UTM Professional Development Research University
2020
Conceptual Design of Infrastructure and Building Construction System for IUIU Campus towards Local Needs
ISLAMIC UNIVERSITY IN UGANDA Business Entity
2020
AUTOMATED PRODUCTION AND ENHANCEMENT OF INTERLOCKING HOLLOW BLOCK SYSTEM BASED ON IBS REQUIREMENT WITH LOCAL ADDITIVE MATERIALS
CREAM Non Goverment Agency
2020
4B578 : AUTOMATED PRODUCTION AND ENHANCEMENT OF INTERLOCKING HOLLOW BLOCK SYSTEM BASED ON IBS REQUIREMENT WITH LOCAL ADDITIVE MATERIALS
RUG OF UTM Matching Grant
2020
Theoretical Components in Resistance and Stiffness Evaluation of Cold-formed Steel LightweightConcrete Composite Connections
RUG OF UTM UTM Fundamental Research
2020
Distributed Rainfall-Runoff Modeling through Integration using Empirical Models for the Simulation of Floods
RUG OF UTM Matching Grant
2020
Martian meta concrete for in situ construction of permanent settlement on Mars
RUG OF UTM UTM High Impact Research
2020
POTENTIAL USE OF FLY ASH AND BOTTOM ASH FOR GREEN STRUCTURAL LIGHTWEIGHT CONCRETE
UNIVERSITAS SRIWIJAYA International Grant
2019
Coal ash utilization for environmental friendly road material
RUG OF UTM Matching Grant
2019
SUSTAINABLE UTILISATION OF COAL ASH FOR QUALITY PAVEMENT MATERIAL
UNIVERSITAS SRIWIJAYA International Grant
2019
REINFORCEMENT OF CEMENTITIOUS MATRIX BY CELLULOSIC AEROGEL - CARBON BASED NANOCOMPOSITE
RUG OF UTM Matching Grant
2019
CELLULOSIC AEROGEL-CARBON BASED NANOCOMPOSITES FOR REINFORCEMENT OF CEMENTITIOUS MATRIX
UNIVERSITAS SRIWIJAYA International Grant
2019
FLOOD ANALYSIS, RISK, AND CONTROL:APPROACHES TOWARD SUSTAINABILITY
UNIVERSITAS SRIWIJAYA International Grant
2019
STUDY ON THE USE OF GREEN WASTE FLY ASH AND BOTTOM ASH FOR LIGHTWEIGHT CONCRETE
RUG OF UTM Matching Grant
2019
PROJEK POTENSI PEMBANGUNAN SOSIO-EKONOMI MASYARAKAT LUAR BANDAR DENGAN MEWUJUDKAN INCUBATOR BENGKEL PENGELUARAN YANG MENGHASILKAN PRODUK MAKANAN HALAL.
MINISTRY OF EDUCATION Business Entity
2019
HIR 7.2 : THERMAL PROPERTIES AND BEHAVIOR OF EFFECTIVE MICROORGANISMS (EM) CONCRETE
RUG OF UTM High Impact Research Grant
2018
HIR 7.4 : BIO-MEDIATED SOIL IMPROVEMENT IN THE MITIGATION OF LIQUEFIABLE SANDY SOIL
RUG OF UTM High Impact Research Grant
2018
FLEXURAL BEHAVIOUR OF INNOVATIVE COLD-FORMED ENCASED COMPOSITE BEAM
RUG OF UTM Tier 2
2018
A STUDY ON THE USE OF NANO MATERIALS AND MICROORGANISM FOR SUSTAINABLE AND MAINTENANCE FREE CONCRETE
RUG OF UTM COE Research Grant
2018
Performance Evaluation of Green Concrete Composites Incorporating Waste Carpet Fibres and Palm Oil Fuel Ash Exposed to Tropical Environments
RUG OF UTM Professional Development Research University
2018
Carbon Footprint Calculator for Malaysian Green Highway Index
LEMBAGA LEBUHRAYA MALAYSIA Non Goverment Agency
2017
CARBON FOOTPRINT CALCULATOR FOR MALAYSIAN GREEN HIGHWAY INDEX (SUSTAINABLE DEVELOPMENT AND CONSTRUCTION ACTIVITIES)
LEMBAGA LEBUHRAYA MALAYSIA Non Goverment Agency
2017
Carbon Footprint Calculator for Malaysian Green Highway Index (Material)
LEMBAGA LEBUHRAYA MALAYSIA Non Goverment Agency
2017
Carbon Footprint Calculator for Malaysian Green Highway Index (Construction and Green Highway Initiatives)
LEMBAGA LEBUHRAYA MALAYSIA Non Goverment Agency
2017
AN INNOVATIVE CONSTRUCTION AND PRODUCTION METHOD OF INTERLOCKING BRICK SYSTEM FOR GREEN BUILDING CONSTRUCTION
MINISTRY OF EDUCATION Translational Research Grant
2017
Development of Lightweight Foam Concrete for Structural Application
RUG OF UTM Tier 1
2017
DEVELOPMENT OF TANJUNG PELEPAS ECOLOGICAL PARK (TPEP) AT PHASE 3, FREE ZONE AREA PORT OF TANJUNG PELEPAS FOR JOHOR PORT AUTHORITY
LEMBAGA PELABUHAN JOHOR Business Entity
2017
STRUCTURAL BEHAVIOR OF COMPOSITE BEAM USED IN SELF-COMPACTING CONCRETE INTEGRATED WITH COLD-FORMED STEEL SECTION.
RUG OF UTM Matching Grant
2016
SUSTAINABLE CONCRETE PERFORMANCE EVALUATION FOR CLIMATE CHANGE EFFECT IN ASIA REGION
RUG OF UTM Matching Grant
2016
PREDICTION MODEL ON HYDRATION TEMPERATURE OF PALM OIL FUEL ASH CONCRETE USING ADVANCED SOFTWARE
RUG OF UTM Matching Grant
2016
LANDSLIDES ASSESSMENT IN KOREA AND MALAYSIA REGION WITH CLIMATE CHANGE
RUG OF UTM Matching Grant
2016
INNOVATIVE MODULAR PILE CAP SYSTEM USING COLD-FORMED STEEL SECTION FOR BUILDING FOUNDATION
RUG OF UTM Tier 1
2016
Real Time Monitoring of Geo-Disaster due to Climate Change
YONSEI UNIVERSITY International Grant
2016
SUSTAINABLE HIGH PERFORMANCE MATERIALS FOR CLIMATE CHANGE
YONSEI UNIVERSITY International Grant
2016
Fundamental Study on Shape Optimization for Interlocking Mortarless Concrete Block: Finite Element simulation
RUG OF UTM Potential Academic Staff
2016
SHORT TERM PERFORMANCE OF WATERPROOF CONCRETE ADMIXTURE USING CRYSTALLINE NANO MATERIAL
RUG OF UTM Tier 1
2016
SMART LIGHTWEIGHT INNOVATIVE MODULAR PANEL SYSTEM (SLIM) USING COLD-FORMED STEEL SECTION
RUG OF UTM Tier 1
2015
Microstructure and Hydration Model of POFA Concrete
HANYANG UNIVERSITY,REPUBLIC OF KOREA International Grant
2015
SUSTAINABLE FLOOD RESISTANT HOUSING DEVELOPMENT IN MALAYSIA: TOWARDSDEVELOPMENT OF BUILDING ASSESSMENT TOOL
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2015
Buckling Resistance Factor for Built-up Cold-Formed Steel Slender Column under Elevated Temperatures
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2015
THE EFFECT OF BUCKLING RESTRAINED BRACED SYSTEMS ON OVERALL RESISTANCE OF A SEISMICALLY DAMAGED BUILDING UNDER POST-EVENT FIRE
RUG OF UTM Professional Development Research University
2015
DEVELOPMENT OF HIGH STRENGTH HOLLOW INTERLOCKING BRICK SYSTEM (HIBS) USING FLY ASH AND VOLCANIC ASH
RUG OF UTM Tier 1
2015
MODULAR CONSTRUCTION OF PREFAB BUILDING WITH ISO SHIPPING CONTAINER
RUG OF UTM Tier 1
2015
Innovative Construction Of Floating Light-Weight Affordable House Designed For Flood Resistant
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2015
Innovative Design and Technology For Sustainable Post Disaster Settlement
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2015
ASSESSMENT MODEL FOR TECHNOLOGICAL LABELING OF SUSTAINABLE AFFORDABLE HOUSING
RUG OF UTM Flagship
2015
Fundamental Stability Formulation for Shipping Container as Core Dwelling
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2014
THE FEASIBILITY STUDY ON MOOC SYSTEM FOR CIVIL ENGINEERING CURRICULUM
RUG OF UTM Flagship
2014
IMPLEMENTATION OF MOOCS IN CIVIL ENGINEERING CURRICULUM
RUG OF UTM Flagship
2014
EFFECTIVENESS OF TEACHING HIGHWAY ENGINEERING USING MOOCS
RUG OF UTM Flagship
2014
CIVIL ENGINEERING STUDENTS NEEDS AND EXPECTATION ON ONLINE LEARNING
RUG OF UTM Flagship
2014
MOOCs implementation in civil engineering curriculum
RUG OF UTM Flagship
2014
Performance of Treated Rubberized Fiber Concrete Under Earthquake and Fire Loadings
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2014
Synthesis and Characterization of eco friendly green nano particles for corrosion inhibition of metals
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2014
FAST TRACK CONSTRUCTION OF COMPOSITE FLOOR SYSTEM WITH COLD FORMED STEEL SECTION
RUG OF UTM Tier 1
2014
Development of Partial Strength Connection for Cruciform Column Section in Low Rise Structures
RUG OF UTM Tier 1
2014
Formulated Elementary Strength And Stability Equations For Thin-Walled Behaviour Of Cold-Formed Steel Joints In Rapid Building-In-Box System (RaBiB)
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2013
Exploring The Interaction of Composite Beam and Slab for Multi-Storey Frame with Interlocking Brick System Produced Locally as Industrialized Building System
RUG OF UTM Tier 1
2012
Rapid Building-in-box System (RaBIB) for Sustainable Residential House
RUG OF UTM Tier 1
2012
Development of New Technologies for Interlocking Brick Block Construction
RUG OF UTM Tier 1
2012
Structural Performance on Cold-formed Steel Joint for House-in-a-Box System
RUG OF UTM Tier 2
2012
MODEL FOR ENERGY EFFICIENCY, ENVIRONMENTAL QUALITY AND MATERIAL USED IN ROAD INFRASTRUCTURES
RUG OF UTM Flagship
2011
INNOVATIVE CONSTRUCTION USING COLD-FORMED STEEL SECTIONS FOR LIGHT STEEL STRUCTURES FOR INDUSTRIALISED BUILDING SYSTEM
RUG OF UTM Tier 1
2011
Investigation on Precast Floor Panel using Lightweight Concrete and Cold-formed Steel Section.
RUG OF UTM Tier 2
2011
INNOVATIVE OPTICAL FIBRE SENSING OF HIGHWAY AND GEOTECHNICAL INFRASTRUCTURES
Tier 1
2011
ANALYTICAL STUDY OF BLIND BOLTED CONNECTIONS TO STRUCTURAL HOLLOW SECTIONS
RUG OF UTM Tier 2
2011
Analytical Models for Strength of Composite Joints in Light Steel Framing
RUG OF UTM Tier 2
2011
Analysis and Testing on Fatigue and Coasting for Kiswire Product
KISWIRE SDN. BHD. Contract
2009
Construction Design Method for Cold-Formed Steel Structures Using Partial Strength Joints
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2007
New Concept Of Construction Method For Foundations System Using Cold-Formed Steel Section.
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2006
Design Procedure of the Use of Partial Strength Joints on Multi-Storey Steel Frames Using TWP Sections and Perwaja Sections
Non Goverment Agency
1999
Economic Aspect of the use of Partial and Full Strength Joints on Multi - Storey Unbraced Steel Frames
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1998
Development of Seismic Hazard Map for Malaysia
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1998
Composite Steel/Concrete Beam Stiffened With A Channel
Short Term
1997
Analytical Studies of the Behaviour of Semi-Rigid Non-Sway Frames with Tubular Columns
Short Term
1996
Predication and Modelling of the Performance and Behaviour of Cement-Block Wall Subjected to Fire Condition
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1996
The Design of a New Bridge Deck System Using Locally Manufacturing Structural Steel Element
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1996
Development of Earthquake Hazard Reduction Products Using Natural Rubber and Steel
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1996
Evaluation On The Performance Of Composite Concrete/Steel Beam Using Locally Produced Materials
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1995
Development Of Computer Software For Analysis And Design Of Steel Framed Structures Under Variable Loading Conditions
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1995
Analysis, Design And Performance Evaluation Of Trapezoid Web Profile
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1995
3D Finite Element Modelling of Semi Rigid Steel Frames During Fire
Short Term
1994
Semi & Rigid Analysis of High Rise Steel Building Using Non Linear Finite Element Technique
Short Term
1994
Solar System For Public Utility : A Case of Bus Stop
Short Term
1994
Performance Of Composite Beam Using Cold-Formed Rectangular Hollow Section Steel
Short Term
1993
Performance Evaluation and Non - Destructive Testing or Welded and Bolted Connection in Steel Structures.
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1991

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year

STRUCTURAL STEEL DESIGN WITH EUROCODE 3: WORK EXAMPLES FOR OPEN SECTION
Original Book CO-AUTHOR
2022
The Polymer Nanocomposite Characteristics On Various Mixtures And Mixing Times In Simple Mixing Method
ENGINEERING SOLID MECHANICS
Publication In Scopus UTM FIRST AUTHOR
2022
Experimental Study On Compressive Strength Of Interlocking Hollow Block System (Ihbs) Using Fly Ash
ES WEB OF CONFERENCES
Publication In Scopus CO-AUTHOR
2022

GEOPOLYMERS AS SUSTAINABLE SURFACE CONCRETE REPAIR MATERIALS
Book (Text) EDITOR
2022

DESIGNING CONCEPTUAL FREE OR LOW MAINTENANCE SUBSTATION FOR PENCAWANG ELEKTRIK (P/E), SISTEM SUIS UTAMA (SSU) AND PENCAWANG PEMBAHAGIAN UTAMA (PPU)
Clasified/Technical Report CO-AUTHOR
2021
Partial Strength Beam-To-Column Connection Of Cold-Formed Single Channel Section: Numerical And Experimental Study
ASM SCIENCE JOURNAL
Publication In Scopus CO-AUTHOR
2021

STRUCTURAL ASSESSMENT AND FORENSIC INVESTIGATION (REPORT NO: FEC/2020/6)
Clasified/Technical Report CO-AUTHOR
2021
Applying A Meta-Heuristic Algorithm To Predict And Optimize Compressive Strength Of Concrete Samples
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Developing Gep Tree-Based, Neuro-Swarm, And Whale Optimization Models For Evaluation Of Bearing Capacity Of Concrete-Filled Steel Tube Columns
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Investigating The Effective Parameters On The Risk Levels Of Rockburst Phenomena By Developing A Hybrid Heuristic Algorithm
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
A New Hybrid Simulated Annealing-Based Genetic Programming Technique To Predict The Ultimate Bearing Capacity Of Piles
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Durability Performance Of Modified Concrete Incorporating Fly Ash And Effective Microorganism
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2021
A Numerical Investigation On The Through Rib Stiffener Beam To Concrete-Filled Steel Tube Column Connections Subjected To Cyclic Loading
ENGINEERING SCIENCE AND TECHNOLOGY, AN INTERNATIONAL JOURNAL
Publication In Web Of Science UTM FIRST AUTHOR
2021
Performance Evaluation Of Sustainable Concrete Comprising Waste Polypropylene Food Tray Fibers And Palm Oil Fuel Ash Exposed To Sulfate And Acid Attacks
CRYSTALS
Publication In Web Of Science CO-AUTHOR
2021
Applying Dual-Tree Complex Discrete Wavelet Transform And Gamma Modulating Function For Simulation Of Ground Motions
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
A Hybrid Gep And Woa Approach To Estimate The Optimal Penetration Rate Of Tbm In Granitic Rock Mass
SOFT COMPUTING
Publication In Web Of Science UTM FIRST AUTHOR
2021
Ga-Svr: A Novel Hybrid Data-Driven Model To Simulate Vertical Load Capacity Of Driven Piles
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Synergistic Effects Of Waste Plastic Food Tray As Low-Cost Fibrous Materials And Palm Oil Fuel Ash On Transport Properties And Drying Shrinkage Of Concrete
JOURNAL OF BUILDING ENGINEERING
Publication In Web Of Science CO-AUTHOR
2021
Green Concrete Composites Production Comprising Metalized Plastic Waste Fibers And Palm Oil Fuel Ash
MATERIALS TODAY-PROCEEDINGS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Bending Experiment On A Novel Configuration Of Composite System Using Rebar As Shear Connectors With Partially Encased Cold-Formed Steel Built-Up Beams
MATERIAL TODAY : PROCEEDINGS
Publication In Web Of Science UTM FIRST AUTHOR
2021
A New Design Of Evolutionary Hybrid Optimization Of Svr Model In Predicting The Blast-Induced Ground Vibration
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Deep Neural Network And Whale Optimization Algorithm To Assess Flyrock Induced By Blasting
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Waste Mineral Wool And Its Opportunities—A Review
MATERIALS
Publication In Web Of Science CO-AUTHOR
2021
Towards Sustainable Concrete Composites Through Waste Valorisation Of Plastic Food Trays As Low-Cost Fibrous Materials
SUSTAINABILITY
Publication In Web Of Science UTM FIRST AUTHOR
2021
Push-Out Test Of Profiled Metal Decking Slabs With Cold-Formed Steel Beams And Rebar Shear Connector
WALAILAK JOURNAL OF SCIENCE AND TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2021
Effect Of Bottom Flange Cleat On Integrated Precast Slab And Column Panel Using Cold-Formed Steel
INTERNATIONAL JOURNAL OF ADVANCED TECHNOLOGY AND ENGINEERING EXPLORATION
Publication In Scopus UTM FIRST AUTHOR
2021

RESEARCH COLLABORATION ON THE DEVELOPMENT OF IUIU MAIN CAMPUS MASTER PLAN : - TOWARDS 2035 CAMPUS DEVELOPMENT AGENDA
Clasified/Technical Report CO-AUTHOR
2021
Prediction Of Flyrock In Mine Blasting: A New Computational Intelligence Approach
NATURAL RESOURCES RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR
2020
Awareness Of Building Information Modeling Implementation In Retrofitting The Existing Residential Building In Malaysia
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE
Publication In Scopus UTM FIRST AUTHOR
2020
A Monte Carlo Simulation Approach For Effective Assessment Of Flyrock Based On Intelligent System Of Neural Network
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2020
Assessing Cohesion Of The Rocks Proposing A New Intelligent Technique Namely Group Method Of Data Handling
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2020
A New Methodology For Optimization And Prediction Of Rate Of Penetration
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2020
Waste Ceramic As Low Cost And Eco-Friendly Materials In The Production Of Sustainable Mortars
JOURNAL OF CLEANER PRODUCTION
Publication In Web Of Science CO-AUTHOR
2020
Sustainable Use Of Waste Polypropylene Fibers And Palm Oil Fuel Ash In The Production Of Novel Prepacked Aggregate Fiber-Reinforced Concrete
SUSTAINABILITY
Publication In Web Of Science UTM FIRST AUTHOR
2020
Influence Of Seat Angles On The Behaviour Of Cold-Formed Steel Concrete Composite Joints
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR
2020
Waste Metalized Film Food Packaging As Low Cost And Eco-Friendly Fibrous Materials In The Production Of Sustainable And Green Concrete Composites
JOURNAL OF CLEANER PRODUCTION
Publication In Web Of Science CO-AUTHOR
2020
Effects Of Waste Ceramic As Cement And Fine Aggregate On Durability Performance Of Sustainable Mortar
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
Publication In Web Of Science CO-AUTHOR
2020
Creep And Drying Shrinkage Performance Of Concrete Composite Comprising Waste Polypropylene Carpet Fibres And Palm Oil Fuel Ash
JOURNAL OF BUILDING ENGINEERING
Publication In Web Of Science CO-AUTHOR
2020
Use Of Intelligent Methods To Design Effective Pattern Parameters Of Mine Blasting To Minimize Flyrock Distance
NATURAL RESOURCES RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR
2020
Intelligent Prediction Of Blasting-Induced Ground Vibration Using Anfis Optimized By Ga And Pso
NATURAL RESOURCES RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR
2020
Forecasting Of Tbm Advance Rate In Hard Rock Condition Based On Artificial Neural Network And Genetic Programming Techniques
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT
Publication In Web Of Science UTM FIRST AUTHOR
2020
Performance Evaluation Of Novel Prepacked Aggregate Concrete With Waste Prolypropylene Fibers At Elevated Temperatures
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2020
Cyclic Behaviour Of Fully-Rigid And Semi-Rigid Steel Beam-To-Column Connections
INTERNATIONAL JOURNAL OF STEEL STRUCTURES
Publication In Web Of Science UTM FIRST AUTHOR
2020
A Svr-Gwo Technique To Minimize Flyrock Distance Resulting From Blasting
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT
Publication In Web Of Science UTM FIRST AUTHOR
2020
Random Forest And Bayesian Network Techniques For Probabilistic Prediction Of Flyrock Induced By Blasting In Quarry Sites
NATURAL RESOURCES RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR
2020
Enhanced Performance Of Concrete Composites Comprising Waste Metalised Polypropylene Fibres Exposed To Aggresive Environments
CRYSTALS
Publication In Web Of Science UTM FIRST AUTHOR
2020
Drying Shrinkage And Creep Properties Of Prepacked Aggregate Concrete Reinforced With Waste Polypropylene Fibers
JOURNAL OF BUILDING ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR
2020
Durability And Thermal Properties Of Prepacked Aggregate Concrete Reinforced With Waste Polypropylene Fibers
JOURNAL OF BUILDING ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR
2020
Enhancement Of Strength And Transport Properties Of A Novel Preplaced Aggregate Fiber Reinforced Concrete By Adding Waste Polypropylene Carpet Fibers
JOURNAL OF BUILDING ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR
2020
The Impact Resistance And Deformation Performance Of Novel Pre-Packed Aggregate Concrete Reinforced With Waste Polypropylene Fibres
CRYSTALS
Publication In Web Of Science UTM FIRST AUTHOR
2020
Can Cold-Formed Steel Section Be Use As A Sustainable Structural Member In Building And Civil Engineering Constructions? A Mini Review
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2020
Sustainable Residential Building Retrofit For Improving Energy Efficiency: The Owners' Perspective In Malaysia
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE
Publication In Scopus UTM FIRST AUTHOR
2020
Analytical And Experimental Investigation On Slip-In Gusset Plate Connection For Double C-Channel Sections Of Cold-Formed Steel
OPEN CIVIL ENGINEERING JOURNAL
Publication In Scopus UTM FIRST AUTHOR
2020
Utilisation Of Waste Marble Powder As Low-Cost Cementing Materials In The Production Of Mortar
JOURNAL OF BUILDING ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2020
Factors Affecting The Delay In Construction At Mentawai Island, Indonesia
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2020
Introducing Effective Microorganism As Self-Curing Agent In Self-Cured Concrete
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2020
Experimental Study Of Slip In Haunched Gusset Plate For Cold Formed Steel Connections
INTERNATIONAL JOURNAL OF SCIENTIFIC AND TECHNOLOGY RESEARCH
Publication In Scopus UTM FIRST AUTHOR
2020
Flexural Performance Of Cold-Formed Steel Section In A Composite Beam System
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2020
Behaviour Of Composite Beam Arranged As Boxed-Section With C-Channel Of Cold-Formed Steel Of Lipped Section
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR
2020
Behavior Of Partial Strength Of Beam-To-Column Connection With Gusset Plate For Cold-Formed Steel Sections
ASEAN ENGINEERING JOURNAL
Publication In Scopus UTM FIRST AUTHOR
2020
Implementation Of Building Information Modeling For Construction Clash Detection Process In The Design Stage: A Case Study Of Malaysian Police Headquarter Building
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE
Publication In Scopus UTM FIRST AUTHOR
2020
Experimental Study On Composite Connection With Double Lipped C- Sections
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2020
Flexural Behaviour Of Interlocking Brick System With Grout Cement Mixed With Various Fibre
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR
2020
Awareness Of Adopting Building Information Modelling In Construction - Case Study Of Consultants Perception In West Sumatra
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2020
Behaviour Of Rectangular Gusset Plate With Angle Cleat Connections For Cold-Formed Steel Section
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2020
A Combination Of Feature Selection And Random Forest Techniques To Solve A Problem Related To Blast-Induced Ground Vibration
APPLIED SCIENCES (SWITZERLAND)
Publication In Scopus UTM FIRST AUTHOR
2020
Neuro-Genetic, Neuro-Imperialism And Genetic Programing Models In Predicting Ultimate Bearing Capacity Of Pile
ENGINEERING WITH COMPUTERS
Publication In Web Of Science CORRESPONDING AUTHOR
2020

EUROCODE 3 (EC3) DESIGN OF STEEL STRUCTURES
Original Book CO-AUTHOR
2019
Experimental And Analytical Study On Composite Connection With Cold-Formed Steel Of Double Channel Sections
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Performance Evaluation Of Green Mortar Comprising Ceramic Waste As Cement And Fine Aggregates Replacement
SN APPLIED SCIENCES
Journal Article Non Citation-Indexed CO-AUTHOR
2019
Effectiveness Of Tropical Soil Bacteria As Self-Healing Agent In Concrete
IOP CONFERENCE SERIES: EARTH AND ENVIRONMENTAL SCIENCE
Publication In Web Of Science CO-AUTHOR
2019
Properties Of Ceramic Tile Waste Based Alkali-Activated Mortars Incorporating Gbfs And Fly Ash
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2019
Evaluation Of Alkali-Activated Mortars Containing High Volume Waste Ceramic Powder And Fly Ash Replacing Gbfs
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2019
Structural Performance Of Steel Beams And Frames With Slant End-Plate Connections At Elevated Temperature
ENGINEERING STRUCTURES
Publication In Web Of Science CO-AUTHOR
2019
Push-Out Tests On Three Innovative Shear Connectors For Composite Cold-Formed Steel Concrete Beams
CONSTRUCTION AND BUILDING MATERIAL
Publication In Web Of Science UTM FIRST AUTHOR
2019
Enhanced Performance Of Green Mortar Comprising High Volume Of Ceramic Waste In Aggressive Environments
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2019
Intelligent Design Of Retaining Wall Structures Under Dynamic Conditions
STEEL AND COMPOSITE STRUCTURES
Publication In Web Of Science UTM FIRST AUTHOR
2019
Supervised Machine Learning Techniques To The Prediction Of Tunnel Boring Machine Penetration Rate
APPLIED SCIENCES-BASEL
Publication In Web Of Science UTM FIRST AUTHOR
2019
Simplification Analysis Of Suction Pile Using Two Dimensions Finite Element Modeling
GEOMECHANICS AND ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR
2019
Fresh And Hardened Properties Of Concrete Containing Effective Microorganisms
IOP CONFERENCE SERIES-EARTH AND ENVIRONMENTAL SCIENCE
Publication In Web Of Science CO-AUTHOR
2019
Proposing A New Model To Approximate The Elasticity Modulus Of Granite Rock Samples Based On Laboratory Tests Results
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT
Publication In Web Of Science UTM FIRST AUTHOR
2019
Performance Evaluation Of Pre-Fabricated Footing Using Cold-Formed Steel Of Lipped C-Channel Section
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR
2019
An Overview Of The Connection Classification Index
ADVANCED STEEL CONSTRUCTION
Publication In Web Of Science UTM FIRST AUTHOR
2019
Structural Behaviour Of Cold-Formed Steel Of Double C-Lipped Channel Sections Integrated With Concrete Slabs As Composite Beams
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2019
Production Of Sustainable Mortar Comprising Waste Ceramic Nanoparticles
SMART NANOCONCRETES AND CEMENT-BASED MATERIALS
Book Chapter UTM FIRST AUTHOR
2019
Experimental Study On Flexural Behaviour Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Structural Behaviour Of Slip-In Gusset Plate Connection For Double Lipped Channel Cold Formed Steel Using Partial Strength Connection
INTERNATIONAL JOURNAL OF SCIENTIFIC AND TECHNOLOGY RESEARCH
Publication In Scopus UTM FIRST AUTHOR
2019

EUROCODE 3 (EC3) DESIGN OF STEEL STRUCTURES
Original Book CO-AUTHOR
2019
Experimental Study On Flexural Behavior Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector
10TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2018)
Conference Paper UTM FIRST AUTHOR
2018
Behavior Of Boxed Cold-Formed Steel As Composite Beam With Rebar As Shear Connector
SUSTAINABLE CIVIL INFRASTRUCTURES
Publication In Scopus CORRESPONDING AUTHOR
2018
Effectiveness Of Tropical Soil Bacteria As Self-Healing Agent In Concrete
THE 12TH INTERNATIONAL CIVIL ENGINEERING POST GRADUATE CONFERENCE (SEPKA) THE 3RD INTERNATIONAL SYMPOSIUM ON EXPERTISE OF ENGINEERING DESIGN (ISEED)
Conference Paper CO-AUTHOR
2018
Structural Performance Of Isolated Steel Beam-To-Column Connection
AMERICAN JOURNAL OF CIVIL ENGINEERING AND ARCHITECTURE
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2018
Performance Prediction Of Tunnel Boring Machine Through Developing A Gene Expression Programming Equation
ENGINEERING WITH COMPUTERS
Publication In Web Of Science UTM FIRST AUTHOR
2018
Airblast Prediction Through A Hybrid Genetic Algorithm-Ann Model
NEURAL COMPUTING AND APPLICATIONS
Publication In Web Of Science CO-AUTHOR
2018
Synergism Between Palm Oil Fuel Ash And Slag: Production Of Environmental-Friendly Alkali Activated Mortars With Enhanced Properties
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2018
Enhanced Corrosion Resistance Of Reinforced Concrete: Role Of Emerging Eco-Friendly Elaeis Guineensis/Silver Nanoparticles Inhibitor
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2018
Waste Ceramic Powder Incorporated Alkali Activated Mortars Exposed To Elevated Temperatures: Performance Evaluation
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2018
Durability Performance Of Concrete Incorporating Waste Metalized Plastic Fibres And Palm Oil Fuel Ash
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2018
Enhanced Performance For Aggressive Environments Of Green Concrete Composites Reinforced With Waste Carpet Fibers And Palm Oil Fuel Ash
JOURNAL OF CLEANER PRODUCTION
Publication In Web Of Science UTM FIRST AUTHOR
2018
The Feasibility Of Improving Impact Resistance And Strength Properties Of Sustainable Concrete Composites By Adding Waste Metalized Plastic Fibres
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2018
Microstructure And Strength Properties Of Mortar Containing Waste Ceramic Nanoparticles
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
Publication In Web Of Science CO-AUTHOR
2018
Measurement Of Strain On Concrete Using An Ordinary Digital Camera
MEASUREMENT
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Fire Resistance Of A Damaged Building Employing Buckling Restrained Braced System
ADVANCED STEEL CONSTRUCTION
Publication In Web Of Science CORRESPONDING AUTHOR
2018
A Passive Metallic Damper With Replaceable Steel Bar Components For Earthquake Protection Of Structures
ENGINEERING STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Conceptual Design Using Industrialized Building System For Affordable Housing Construction In Indonesia
ADVANCED SCIENCE LETTERS
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Factors Affecting The Construction Delay In Mentawai Island, Indonesia
ADVANCED SCIENCE LETTERS
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Distribution Of Shear Force In Perforated Shear Connectors
STEEL AND COMPOSITE STRUCTURES
Publication In Web Of Science UTM FIRST AUTHOR
2018
Effects Of Pofa Replaced With Fa On Durability Properties Of Gbfs Included Alkali Activated Mortars
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2018
I-Beam To Square Hollow Column Blind Bolted Moment Connection: Experimental And Numerical Study
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Experimental Study On The Performance Of Slant End-Plate Connections At Elevated Temperature
ADVANCED STEEL CONSTRUCTION
Publication In Web Of Science CO-AUTHOR
2018
Production Of Sustainable Fibre-Reinforced Concrete Incorporating Waste Chopped Metallic Film Fibres And Palm Oil Fuel Ash
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES
Publication In Web Of Science UTM FIRST AUTHOR
2018
Strength And Transport Properties Of Concrete Composites Incorporating Waste Carpet Fibres And Palm Oil Fuel Ash
JOURNAL OF BUILDING ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR
2018
Experimental Study Of Pipe-Fuse Damper For Passive Energy Dissipation In Structures
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Experimental Investigations On Monotonic And Cyclic Behavior Of Steel Pallet Rack Connections
ENGINEERING FAILURE ANALYSIS
Publication In Web Of Science UTM FIRST AUTHOR
2018
Economic Aspects Of Cold Formed Steel Section Designed As Composite Beam
ADVANCED SCIENCE LETTERS
Publication In Web Of Science UTM FIRST AUTHOR
2018
Production Of Sustainable Green Concrete Composites Comprising Industrial Waste Carpet Fibres
GREEN COMPOSITES SUSTAINABLE RAW MATERIALS
Book Chapter UTM FIRST AUTHOR
2018
Experimental Investigation On Lightweight Composite Slab For Floating Structures
IMPROVING FLOOD MANAGEMENT, PREDICTION AND MONITORING: CASE STUDIES IN ASIA
Book Chapter CO-AUTHOR
2018
Impact Of Curing Temperatures And Alkaline Activators On Compressive Strength And Porosity Of Ternary Blended Geopolymer Mortars
CASE STUDIES IN CONSTRUCTION MATERIALS
Publication In Scopus CO-AUTHOR
2018
Comparative Study Between Linear-Interpolation And Stress-Block Methods Of Composite Design Using Cold-Formed Steel Section
INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY(UAE)
Publication In Scopus CO-AUTHOR
2018
Effect Of Binder To Fine Aggregate Content On Performance Of Sustainable Alkali Activated Mortars Incorporating Solid Waste Materials
CHEMICAL ENGINEERING TRANSACTIONS
Publication In Scopus CO-AUTHOR
2018
Performance Of Sustainable Alkali Activated Mortars Containing Solid Waste Ceramic Powder
CHEMICAL ENGINEERING TRANSACTIONS
Publication In Scopus CO-AUTHOR
2018
Fresh And Hardened Properties Of Concrete Containing Effective Microorganisms
THE 12TH INTERNATIONAL CIVIL ENGINEERING POST GRADUATE CONFERENCE (SEPKA) THE 3RD INTERNATIONAL SYMPOSIUM ON EXPERTISE OF ENGINEERING DESIGN (ISEED)
Conference Paper CO-AUTHOR
2018
Experimental Investigation Of Long Interlocking Brick Column Subjected To Eccentric Load
2ND PROCEEDING OF CIVIL ENGINEERING: VOLUME 1 - STRUCTURE AND MATERIALS
Proceedings CO-AUTHOR
2017
Economic Aspects Of Interlocking Hollow Brick System Designed For Industrialized Building System
AIP CONFERENCE PROCEEDINGS
Publication In Scopus CORRESPONDING AUTHOR
2017
Case Study On Safety Consideration In The Construction Of Horse Stable
1ST INTERNATIONAL CONGRESS ON INNOVATIONS IN CIVIL ENGINEERING (ICE 2017)
Conference Paper CO-AUTHOR
2017
Seismic Assessment Of Base-Isolated Nuclear Power Plants
ADVANCES IN COMPUTATIONAL DESIGN
Journal Article Non Citation-Indexed CO-AUTHOR
2017
Improvement Of Problematic Soils With Biopolymer - An Environmentally Friendly Soil Stabilizer
JOURNAL OF MATERIALS IN CIVIL ENGINNERING
Publication In Web Of Science CO-AUTHOR
2017
Numerical Analysis Of Tilted Angle Shear Connectors In Steel-Concrete Composite Systems
STEEL AND COMPOSITE STRUCTURES
Publication In Web Of Science UTM FIRST AUTHOR
2017
A New Developed Approach For The Prediction Of Ground Vibration Using A Hybrid Pso-Optimized Anfis-Based Model
ENVIRONMENTAL EARTH SCIENCES
Publication In Web Of Science UTM FIRST AUTHOR
2017
Application Of Pso To Develop A Powerful Equation For Prediction Of Flyrock Due To Blasting
NEURAL COMPUTING AND APPLICATIONS
Publication In Web Of Science CO-AUTHOR
2017
Seismic Performance Of Steel Frames With Semirigid Connections
JOURNAL OF ENGINEERING
Publication In Web Of Science CORRESPONDING AUTHOR
2017
Evaluation Of The Seismic Performance Of Special Moment Frames Using Incremental Nonlinear Dynamic Analysis
STRUCTURAL ENGINEERING AND MECHANICS
Publication In Web Of Science UTM FIRST AUTHOR
2017
Splitting Tensile Strength Of Lightweight Foamed Concrete With Polypropylene Fiber
INTERNATIONAL JOURNAL ON ADVANCED SCIENCE, ENGINEERING AND INFORMATION TECHNOLOGY
Publication In Scopus CO-AUTHOR
2017
Experimental Behaviour Of Beam-Column Connection Using Cold-Formed Steel Sections With Rectangular Gusset-Plate
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2017
Finite Element Analysis Of Composite Beam-To-Column Connection With Cold-Formed Steel Section
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2017
Structural Aspects Of Cold-Formed Steel Section Designed As U-Shape Composite Beam
AIP CONFERENCE PROCEEDINGS
Publication In Scopus CORRESPONDING AUTHOR
2017
Prediction On Flexural Strength Of Encased Composite Beam With Cold-Formed Steel Section
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2017
Structural Behavior Of Prefabricated Pad Footing System Designed Using Cold-Formed Steel Lipped Channel Section
2ND PROCEEDING OF CIVIL ENGINEERING: VOLUME 1 - STRUCTURE AND MATERIALS
Proceedings CO-AUTHOR
2017
Post-Disaster Building Damage Classification Of Flood Affected Area: Manek Urai, Kelantan, Malaysia
ABSTRACT OF EMERGING TRENDS IN SCIENTIFIC RESEARCH
Proceedings CO-AUTHOR
2016
Splitting Tensile Strength Of Lightweight Foamed Concrete With Polypropylene Fiber
SRIWIJAYA INTERNATIONAL CONFERENCE ON ENGINEERING SCIENCE AND TECHNOLOGY (SICEST) 2016
Conference Paper CO-AUTHOR
2016
Readiness Of Civil Engineering Faculty Members In Implementing Mooc
REGIONAL CONFERENCE ON ENGINEERING EDUCATION 2016
Conference Paper CO-AUTHOR
2016
Structural Post-Disaster Damage Classification With Consideration Of Liquefaction Due To Flood: Manek Urai, Kelantan, Malaysia
INTERNATIONAL JOURNAL OF SUSTAINABLE ENERGY AND ENVIRONMENTAL RESEARCH
Journal Article Non Citation-Indexed CO-AUTHOR
2016
Influence Of Shear Connector Size On Ultimate Strength In Composite Construction With Cold-Formed Steel Channel Lipped Section
REVIEW OF INDUSTRIAL ENGINEERING LETTERS
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2016
Structural Post-Disaster Damage Classification With Consideration Of Liquefaction Due To Flood: Manek Urai Kelantan, Malaysia
INTERNATIONAL JOURNAL OF SUSTAINABLE ENERGY AND ENVIRONMENTAL RESEARCH
Journal Article Non Citation-Indexed CO-AUTHOR
2016
Evaluation Of New Spiral Shear Reinforcement Pattern For Reinforced Concrete Joints Subjected To Cyclic Loading
ADVANCES IN STRUCTURAL ENGINEERING
Publication In Web Of Science CO-AUTHOR
2016
Bolted Shear Connectors Performance In Self-Compacting Concrete Integrated With Cold-Formed Steel Section
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES
Publication In Web Of Science UTM FIRST AUTHOR
2016
Effect Of Magnesium Chloride Solution On The Physico-Chemical Characteristics Of Tropical Peat
ENVIRONMENTAL EARTH SCIENCES
Publication In Web Of Science CO-AUTHOR
2016
Time-Dependent Physicochemical Characteristics Of Malaysian Residual Soil Stabilized With Magnesium Chloride Solution
ARABIAN JOURNAL OF GEOSCIENCES
Publication In Web Of Science CO-AUTHOR
2016
Behavior Of Pre-Cast U-Shaped Composite Beam Integrating Cold-Formed Steel With Ferro-Cement Slab
THIN-WALLED STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2016
Strength Prediction Of Rotary Brace Damper Using Mlr And Mars
STRUCTURAL ENGINEERING AND MECHANICS, AN INT'L JOURNAL
Publication In Web Of Science UTM FIRST AUTHOR
2016
Effect Of Web Holes And Bearing Stiffeners On Flexural-Shear Interaction Strength Of Steel Cold-Formed C-Channel Sections
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2016
Numerical Study On The Structural Performance Of Steel Beams With Slant End-Plate Connections
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2016
Cyclic And Explosive Evaluation Of New Proposed Steel Joint
ADVANCES IN CIVIL ENGINEERING
Publication In Web Of Science CORRESPONDING AUTHOR
2016
Performance Of Steel Beams Strengthened With Pultruded Cfrp Plate Under Various Exposures
STEEL AND COMPOSITE STRUCTURES
Publication In Web Of Science CO-AUTHOR
2016
Behaviour And Design Of Cold-Formed Steel C-Sections With Cover Plates Under Bending
INTERNATIONAL JOURNAL OF STEEL STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2016

ADVANCES IN CONSTRUCTION, ENGINEERING, AND PLANNING
Book (Text) CO-AUTHOR
2016
Economic Aspects Of Cruciform Column Used In The Design Of Unbraced Multi-Storey Steel Frame
ADVANCES IN CONSTRUCTION ENGINEERING, MANAGEMENT, AND PLANNING
Book Chapter UTM FIRST AUTHOR
2016
Types Of Shear Connectors In Steel Concrete Composite Beams: A Review
ADVANCES IN CONSTRUCTION, ENGINEERING, MANAGEMENT, AND PLANNING
Book Chapter UTM FIRST AUTHOR
2016
Temperature Development Of Cold Formed Steel Column Channel Section Under Standard Fire
INTERNATIONAL CONFERENCE ON ADVANCED SCIENCE, ENGINEERING AND TECHNOLOGY (ICASET)
Publication In Scopus CO-AUTHOR
2016
Temperature Rise Of Cold-Formed Steel Built-Up Back-To-Back Column Under Standard Fire
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2016
Study On Mechanical Behaviour Of Cold-Formed Steel Channel Pre Cut-Curving Beam
AIP CONFERENCE PROCEEDINGS - 1ST INTERNATIONAL CONFERENCE ON ADVANCED SCIENCE, ENGINEERING AND TECHNOLOGY, ICASET 2015
Publication In Scopus CO-AUTHOR
2016
Strengthening Method And Structural Performance Of Cold-Formed Cut-Curved Steel Under Compression
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2016
Experimental Study On Flexural Behavior Of Cold-Formed Steel Channels With Curved Section
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus CO-AUTHOR
2016

JOHOR-RIAU LINK DEVELOPMENT
Policy Paper CO-AUTHOR
2015
Structural Performance Of Cold-Formed Steel Section In Composite Structures: A Review
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2015
Influence Of Shear Connector Size On Ultimate Strength In Composite Construction With Cold-Formed Steel Channel Lipped Section
4TH INTERNATIONAL CONFERENCE ON EMERGING TRESNDS IN SCIENTIFIC RESEARCH
Proceedings UTM FIRST AUTHOR
2015
Impact Of Shear Connector Spacing In Composite Construction Incorporating Cold-Formed Steel Channel Lipped Section
4TH INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN SCIENTIFIC RESEARCH
Proceedings CORRESPONDING AUTHOR
2015
Experimental And Analytical Study Of Various Shear Connectors Used For Cold-Formed Steel-Ferrocement Composite Beam
APPLIED MECHANICS AND MATERIALS
Proceedings CORRESPONDING AUTHOR
2015
Effectiveness Of Palm Oil Fuel Ash As Micro-Filler In Polymer Concrete
2ND INTERNATIONAL CONFERENCE ON CONSTRUCTION AND BUILDING ENGINEERING (ICONBUILD 2015)
Conference Paper CO-AUTHOR
2015
Wind-Moment Design Of Semi-Rigid Un-Braced Steel Frames Using Cruciform Column (Ccub) Section
INTERNATIONAL JOURNAL OF STEEL STRUCTURES
Publication In Web Of Science CO-AUTHOR
2015
Severe Loading Assessment Of Modern And New Proposed Beam To Column Connections
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES
Publication In Web Of Science CO-AUTHOR
2015
Behavior Of Shear Connectors In Composite Column Of Cold-Formed Steel With Lipped C-Channel Assembled With Ferro-Cement Jacket
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CORRESPONDING AUTHOR
2015
Seismic And Progressive Collapse Assessment Of New Proposed Steel Connection
ADVANCES IN STRUCTURAL ENGINEERING
Publication In Web Of Science CO-AUTHOR
2015
Seismic And Progressive Collapse Assessment Of Sideplate Moment Connection System
STRUCTURAL ENGINEERING AND MECHANICS
Publication In Web Of Science CO-AUTHOR
2015
An Experimental Investigation Of Stiffened Cold-Formed C-Channels In Pure Bending And Primarily Shear Conditions
THIN-WALLED STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2015
Elastic Design Of Slender High-Strength Rc Circular Columns Confined With External Tensioned Steel Straps
ADVANCES IN STRUCTURAL ENGINEERING
Publication In Web Of Science CO-AUTHOR
2015
Seismic Performance Of Ductility Classes Medium Rc Beam-Column Connections With Continuous Rectangular Spiral Transverse Reinforcements
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES
Publication In Web Of Science CO-AUTHOR
2015
Standardization Of Composite Connections For Trapezoid Web Profiled Steel Sections
STRUCTURAL ENGINEERING AND MECHANICS
Publication In Web Of Science CORRESPONDING AUTHOR
2015
A Numerical Analysis On The Performance Of Buckling Restrained Braced At Fire-Study Of The Gap Filler Effect
STEEL AND COMPOSITE STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2015
Fire Response Of A 3d Multi-Storey Building With Buckling Restrained Braces
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2015

SUSTAINABLE CONSTRUCTION MANAGEMENT AND BUILDING DESIGN TECHNOLOGIES
Book (Text) UTM FIRST AUTHOR
2015
Performance Of Varying Bolted Shear Connectors In Cold-Formed Steel Composite Beam
ARCHITECTURAL ENGINEERING AND NEW MATERIALS
Book Chapter CORRESPONDING AUTHOR
2015
Construction Disputes Due To Delay
SUSTAINABLE CONSTRUCTION MANAGEMENT AND BUILDING DESIGN TECHNOLOGIES
Book Chapter CO-AUTHOR
2015
Influence Of Longitudinal Spaced Bolted Shear Connectors On Composite Beam Integrated With Concrete And Cold-Formed Steel
ARCHITECTURAL ENGINEERING AND NEW MATERIALS
Book Chapter CORRESPONDING AUTHOR
2015
Analytical Study Of End-Plate Connection On Cruciform Column Section
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2015
Resistance Of Concrete Protective Coatings In Different Chemical Environments
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2015
Shear Capacity Evaluation Of Reinforced Concrete Beams: Finite Element Simulation
JURNAL TEKNOLOGI
Publication In Scopus UTM FIRST AUTHOR
2015
Finite Element Modelling Of Compartment Fire Using Abaqus
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2015
Comparative Study Of Eight Metallic Yielding Dampers
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2015
Steel Weight Saving Developed From Semi-Continuous Construction In Multi-Storey Braced Steel Frame Based On Euro-Code 3
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2015
Push-Out Tests Of Innovative Shear Connectors Between Cold-Formed Steel Section Integrated With Ferrocement Jacket
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2015
Strength Capacity Of Bolted Shear Connectors With Cold-Formed Steel Section Integrated As Composite Beam In Self-Compacting Concrete
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2015
Composite Construction Of Cold-Formed Steel (Cfs) Section With High Strength Bolted Shear Connector
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2015
Effectiveness Of Palm Oil Fuel Ash As Micro-Filler In Polymer Concrete
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2015
Compressive Strength Of Ground Waste Seashells In Cement Mortars For Masonry And Plastering
APPLIED MECHANICS AND MATERIALS
Proceedings CO-AUTHOR
2015
Experimental Study Onbolted Shear Connector Enhancement In Precast Cold-Formed Steel-Ferrocementfor Composite Beam System
THE 2014 1ST INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL AND STRUCTURAL MECHANICAL ENGINEERING (ICAMSME 2014)
Conference Paper CORRESPONDING AUTHOR
2014
Ultimate Load Of Built-Up Cold Formed Steel Column
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus CO-AUTHOR
2014
Report On Lateral Sway Test Of Non-Compact Light Steel Frame
NATIONAL SEMINAR ON CIVIL ENGINEERING RESEARCH (SEPKA2014)
Conference Paper CO-AUTHOR
2014
Engineering Properties Of Bio-Inspired Cement Mortar Containing Seashell Powder
NATIONAL SEMINAR ON CIVIL ENGINEERING RESEARCH SEPKA2014
Conference Paper CO-AUTHOR
2014
Seismic Assessment Of Rc Frames With Setbacks
AMERICAN JOURNAL OF CIVIL ENGINEERING AND ARCHITECTURE
Journal Article Non Citation-Indexed CO-AUTHOR
2014
Review On Cold-Formed Steel Connections
SCIENTIFIC WORLD JOURNAL
Publication In Web Of Science CO-AUTHOR
2014
Performance Of Partial Strength Connection Connected By Thick Plate Between Column Flanges
STRUCTURAL ENGINEERING AND MECHANICS
Publication In Web Of Science CORRESPONDING AUTHOR
2014
Thermal Behavior Of Cylindrical Buckling Restrained Braces At Elevated Temperatures
SCIENTIFIC WORLD JOURNAL
Publication In Web Of Science CORRESPONDING AUTHOR
2014
Preferred Test Methods To Select Suitable Surface Repair Materials In Severe Climates
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2014
Comparative Study On The Behaviour Of Buckling Restrained Braced Frames At Fire
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
Publication In Web Of Science CORRESPONDING AUTHOR
2014
Economic Aspect Of Square Hollow Section In The Design Of Multi-Storey Unbraced Steel Frame
MATERIALS RESEARCH INNOVATIONS
Publication In Web Of Science CO-AUTHOR
2014
Preferred Test Methods To Select Suitable Surface Repair Materials In Severe Climates
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2014
Sulphate Resistance Of Geopolymer Concrete Prepared From Blended Waste Fuel Ash
Journal of Materials in Civil Engineering
Publication In Web Of Science CO-AUTHOR
2014
Evaluation Of Extreme Load Performance Of Pre-Northridge Connections
GRADEVINAR
Publication In Web Of Science CO-AUTHOR
2014
Emerging Issues On Sustainable Urban Development
EMERGING ISSUES ON SUSTAINABLE URBAN DEVELOPMENT
Book Chapter CORRESPONDING AUTHOR
2014
Influence Of Angle Thickness Towards Stiffness And Strength Prediction For Cold-Formed Steel Top-Seat Flange Cleat Connection
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2014
Seismic Performance Of Rc Beam-Column Connections With Continuous Rectangular Spiral Transverse Reinforcements For Low Ductility Classes
SCIENTIFIC WORLD JOURNAL
Publication In Scopus CO-AUTHOR
2014
Experimental And Analytical Study Of Various Shear Connectors Used For Cold-Formed Steel-Ferrocement Composite Beam
3RD INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL ENGINEERING & TECHNOLOGY (ICAMET 2014)
Conference Paper CORRESPONDING AUTHOR
2014
Push-Out Tests For Determining Shear Strength And Stiffness Of Connectors Between Cold-Formed And Ferrocement Jacket
THE 9 TH INTERNATIONAL CONFERENCE OF GEOTECHNICAL & TRANSPORTA TION ENGINEERING (GEOTROPIKA) AND THE 1 ST INTERNATIONAL CONFERENCE ON CONSTRUCTION AND BUILDING ENGINEERING (ICONBUILD) – GEOCON2013
Conference Paper CORRESPONDING AUTHOR
2013
Analytical Study Of End-Plate Connection On Cruciform Column Section
GEOCON 2013-Persada Johor International Convention Centre, Johor Bahru, Johor, Malaysia
Conference Paper CO-AUTHOR
2013
Numerical Investigation On Roof Truss With Cold-Formed Steel Sections
THE INTERNATIONAL CONFERENCE ON SUSTAINABLE BUILT ENVIRONMENT FOR NOW AND THE FUTURE
Conference Paper CO-AUTHOR
2013
Properties Of Microfine Cement Grouts At 4 Degrees C, 10 Degrees C And 20 Degrees C
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2013
In Situ Performance Of Field-Moulded Joint Sealants In Dams
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2013
Sulfuric Acid Resistance Of Blended Ash Geopolymer Concrete
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2013
Numerical Modelling Of Stiffness And Strength Behaviour Of Top-Seat Flange-Cleat Connection For Cold-Formed Double Channel Section
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2013
Properties Of Porous Concrete From Waste Crushed Concrete (Recycled Aggregate)
Construction and Building Materials
Publication In Web Of Science CO-AUTHOR
2013
A Review On Steel/Cfrp Strengthening Systems Focusing Environmental Performance
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CO-AUTHOR
2013
Towards Light-Weight Composite Construction: Innovative Shear Connector For Composite Beams
APPLIED MECHANICS AND MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2013
Experimental Investigation Of Retrofitted Extended End-Plate Connections
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2013
Effective Steel Area Of Fully Embedded Cold-Formed Steel Frame In Composite Slab System Under Pure Bending
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2013
Numerical Simulation Of Cold-Formed Steel Top-Seat Flange Cleat Connection
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING)
Publication In Scopus CO-AUTHOR
2013
Feasibility Of Developing Composite Action Between Concrete And Cold-Formed Steel Beam
Journal of Central South University
Publication In Web Of Science CORRESPONDING AUTHOR
2013
Numerical Modelling Of Top-Seat Flange-Cleat Connection In Light Steel Framing
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC) AND 1ST INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING RESEARCH (ICCER)
Conference Paper CO-AUTHOR
2012
Strength And Initial Stiffness Of Extended End-Plate Connection Based On The Component Model
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2012)
Conference Paper CO-AUTHOR
2012
Finite Element Models For Blind-Bolted End-Plate Connection On Structural Hollow Section
8TH ASIA PACIFIC STRUCTURAL ENGINEERING AND CONSTRUCTION CONFERENCE (APSEC 2012)
Conference Paper CO-AUTHOR
2012
Experimental Investigation On Wide-Span Cold-Formed Steel Roof Truss System
APPLIED MECHANICS AND MATERIALS
Publication In Web Of Science CO-AUTHOR
2012
Numerical Modelling And Validation Of Light Gauge Steel Top-Seat Flange-Cleat Connection
JOURNAL OF VIBROENGINEERING
Publication In Web Of Science CO-AUTHOR
2012
Experimental Evaluation Of Flush End-Plate Connection With Built-Up Hybrid Beam Section
ADVANCES IN STRUCTURAL ENGINEERING
Publication In Web Of Science CORRESPONDING AUTHOR
2012
Comparative Analysis Of Seismic Behavior Of V-Braced Frames And Suspended Zipper-Braced Frames
ADVANCED SCIENCE LETTERS
Publication In Scopus CORRESPONDING AUTHOR
2012
Optimization Of Cold-Formed Channel Sections Using Imperialist Competitive Algorithm
APPLIED MECHANICS AND MATERIALS
Publication In Web Of Science CO-AUTHOR
2012
Mapping Of Full-Field Bond Stress Distribution On Concrete Using Digital Image Correlation Results
JOURNAL OF APPLIED SCIENCES
Publication In Scopus CO-AUTHOR
2012
Flexural Performance Of Laminated Composite Plates With Diagonally Perturbed Localized Delamination
ADVANCED SCIENCE LETTERS
Publication In Scopus CO-AUTHOR
2012
Experimental Investigation On Locally Produced Cold-Formed Steel Sections For Roof Truss System
ADVANCED SCIENCE LETTERS
Publication In Scopus CO-AUTHOR
2012
Structural Behaviour Of Combined Flange-Cleat And Gusset Plate Connection For Cold-Formed Steel Double Channel Sections
ADVANCED SCIENCE LETTERS
Publication In Scopus CO-AUTHOR
2012
Microbiologically Influenced Corrosion Of X-70 Carbon Steel By Desulfovibrio Vulgaris
ADVANCED SCIENCE LETTERS
Publication In Scopus CO-AUTHOR
2012
Experimental Tests On Composite Beam With Various Slab Systems
APPLIED MECHANICS AND MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2012
Experimental Investigation On Sub-Assemblage Frame With Cruciform Column Section
THE 6TH INTERNATIONAL SYMPOSIUM ON STEEL STRUCTURES (ISSS 2011)
Conference Paper CO-AUTHOR
2011
Experimental Investigation On Slip-In Connection For Cold-Formed Steel Double Channel Sections
ADVANCED MATERIALS RESEARCH
Publication In Web Of Science CO-AUTHOR
2011
Behaviour Of Composite Beam With Trapezoid Web Profiled Steel Section In Sub-Assemblage Frame
ADVANCED MATERIALS RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR
2011
Experimental Investigation Of End-Plate Connection With Cruciform Column Section
ADVANCED MATERIALS RESEARCH
Publication In Web Of Science CO-AUTHOR
2011
Experimental Investigation On Bolted Angle Connections For Cold-Formed Steel Sections
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES
Publication In Web Of Science CO-AUTHOR
2011
Finite Element Analysis Of Flush End-Plate Connections Connected To Column Web
INTERNATIONAL JOURNAL OF STEEL STRUCTURES
Publication In Web Of Science CORRESPONDING AUTHOR
2011
Limiting The Sway On Multi-Storey Un-Braced Steel Frames Bending On Weak Axis With Partial Strength Connections
STRUCTURAL ENGINEERING AND MECHANICS
Publication In Web Of Science CORRESPONDING AUTHOR
2011
Experimental Investigation Of Flush End-Plate Connection Connected To Column Web
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES
Publication In Web Of Science UTM FIRST AUTHOR
2011
Experimental Investigation On Full-Scale Sub-Assemblage Frame
ADVANCES IN STEEL AND ALUMINIUM STRUCTURES
Publication In Web Of Science CO-AUTHOR
2011
Maximum Local Thermal Effects Carpet Plot For Symmetric Laminated Composite Plates
ADVANCED MATERIALS RESEARCH
Publication In Web Of Science CO-AUTHOR
2011

STEELWORK DESIGN GUIDE TO BS 5950-1: 2000
Book (Text) INDIVIDUAL AUTHOR
2010
Construction And Building Materials
Experimental Investigation of Short Cruciform Columns Using Universal Beam Sections
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2009
Thin-Walled Structures
Performance of Pad Footing with Cold-Formed Lipped C-Channel Steel Section as Permanent Form-Work
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2009
Composites Science & Technology
Experimental Tests On Pad Footing With Cold-Formed Lipped C-Channel Steel Section
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2009
Construction And Building Materials
Experimental Tests on Composite Beam with Trapezoid Web Profiled Steel Sections
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2009
-
STEELWORK DESIGN GUIDE TO BS 5950-1: 2000
Book (Text) CORRESPONDING AUTHOR
2009
Journal Of Constructional Steel Research
Wind-Moment Design of Semi-Rigid Un-braced Steel Frames using Cruciform Column (CCUB) Sections
Journal Article Non Citation-Indexed CO-AUTHOR
2009
International Journal Of Steel And Composite Structures
Standardization of Partial Stength Composite Connections for TWP sections.
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2009
International Journal Of Steel Structures,
Comparison of Component Method with Experimental Tests for Flush End-Plate Connections using Hot-Rolled Perwaja Steel Sections
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2009
Push-Off Tests On Pin-Connected Shear Studs With Composite Steel-Concrete Beams
CONSTRUCTION AND BUILDING MATERIALS
Publication In Web Of Science CORRESPONDING AUTHOR
2009
Engineering Structures
Experimental Investigation of Flush End-Plate Connection Connected To Column Web
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2009
Experimental Tests On Composite And Non-Composite Connections Using Trapezoid Web Profiled Steel Sections
International Journal of Steel Structures
Publication In Scopus INDIVIDUAL AUTHOR
2008
Standardisation Of Partion Partial Strength Connections Of Extended Emd-Plate Connections For Trapezoid Web Profiled Steel Sections
Malaysian Consructions Research Journal
Journal Article Non Citation-Indexed INDIVIDUAL AUTHOR
2008
Experimental Test On Beam To Column Of Partial Strength Composite Connections Using Trapezoid Web Profiled Steel Sections
1st Construction Industry Research Achievement International Conference (CIRAIC 2007)
Conference Paper INDIVIDUAL AUTHOR
2007
Economic Aspects Of Partial Strength Connection In The Design Of Braced Steel Frame Using Trapezoidal Web Profiled Steel Sections
Prosiding Kebangsaan Awam'07
Conference Paper INDIVIDUAL AUTHOR
2007
Comparison Of Partial Strength Connection Between Extended And Flush End-Plate Connections With Trapezoid Web Profilled Steel Sections
1st Construction Industry Research Achievement International Conference (CIRAIC 2007)
Conference Paper INDIVIDUAL AUTHOR
2007
Ultimated Axial Load Of Cruciform Column Using Universal Beam Section
Prosiding Kebangsaan Awam'07
Conference Paper INDIVIDUAL AUTHOR
2007
Finite Element Analysis On Th Estrength Of Flush Endplate Connection With Trapezoid Web Profile Beam Using Lusas Software
National Seminar on Civil Engineering Research (SEPKA 2007)
Conference Paper INDIVIDUAL AUTHOR
2007

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
ASHRAF MOHAMED MOSTAFA SHEHATA
FINITE ELEMENT MODELLING OF STEEL FRAMES UNDER FIRE
PHD ON GOING SUPERVISOR
ARIZU BIN SULAIMAN
BEHAVIOUR OF PARTIAL STRENGHT CONNECTIONS WITH TRAPEZOID WEB PROFILED STEEL SECTIONS
PHD GRADUATED SUPERVISOR 2006
ANIS
BEHAVIOUR OF COMPOSITE PARTIAL STRENGHT CONNECTIONS WITH TRAPEZOID WEB PROFILED STEEL SECTION
PHD GRADUATED SUPERVISOR 2007
TAN CHER SIANG
BEHAVIOUR OF PIN AND PARTIAL STRENGTH BEAM-TO-COLUMN CONNECTIONS WITH DOUBLE CHANNEL COLD-FORMED STEEL SECTIONS
PHD GRADUATED SUPERVISOR 2009
SHEK POI NGIAN
STRUCTURAL BEHAVIOUR OF BUILT - UP STEEL SECTIONS USING PARTIAL STRENGTH CONNECTION
PHD GRADUATED SUPERVISOR 2009
SALEH OMAR AHMED BAMAGA
STRUCTURAL BEHAVIOUR OF COMPOSITE BEAMS WITH COLD FORMED STEEL SECTION
PHD GRADUATED SUPERVISOR 2013
BEHZAD BAYAT
SEISMIC PERFORMANCE OF INNOVATIVE DOUBLE LAYER SPACE SHEAR WALL
PHD GRADUATED CO-SUPERVISOR 2014
TALAL M H F ALHAJRI
STRUCTURAL BEHAVIOUR OF AN INNOVATIVE PRECAST COLD-FORMED STEEL FERROCEMENT AS COMPOSITE BEAM
PHD GRADUATED SUPERVISOR 2014
ELNAZ TALEBI
THE BEHAVIOUR OF BUCKLING RESTRAINED BRACE SYSTEM AT ELEVATED TEMPERATURE
PHD GRADUATED SUPERVISOR 2014
LEE YEONG HUEI
PERFORMANCE OF LIGHT STEEL FRAMING WITH BOLTED TOP-SEAT FLANGE CLEAT CONNECTION
PHD GRADUATED CO-SUPERVISOR 2014
KHALED KH D SH O ALENEZI
BEHAVIOUR OF COLD-FORMED LIPPED C-CHANNEL WITH FERROCEMENT JACKET COMPOSITE COLUMN UNDER AXIAL COMPRESSION
PHD GRADUATED SUPERVISOR 2015
AHMAD NUR FAIDHI BIN RIZALMAN
NUMERICAL SIMULATION OF AXIALLY LOADED CONCRETE FILLED HOLLOW STEEL SECTION COLUMNS AT ELEVATED TEMPERATURES
PHD GRADUATED SUPERVISOR 2015
MUSTAPHA MUHAMMAD LAWAN
STRUCTURAL PERFORMANCE OF COLD-FORMED STEEL WITH SELF-COMPACTING CONCRETE IN A COMPOSITE BEAM SYSTEM
PHD GRADUATED SUPERVISOR 2015
MOHD SYAHRUL HISYAM BIN MOHD SANI
PERFORMANCE OF CUT-CURVED COLD-FORMED STEEL CHANNEL SECTIONS FOR ROOF TRUSS SYSTEM
PHD GRADUATED CO-SUPERVISOR 2018
REZA AGHLARA
AN INNOVATIVE PASSIVE METALLIC DAMPER WITH REPLACEABLE COMPONENTS FOR EARTHQUAKE PROTECTION OF STRUCTURES
PHD GRADUATED SUPERVISOR 2018
TAN BOON CHEIK
STRUCTURAL BEHAVIOUR OF END-PLATE CONNECTIONS ON HYBRID BEAM TO CRUCIFORM COLUMN SECTION
PHD GRADUATED CO-SUPERVISOR 2019
NOR MASLINA BINTI MOHSAN
STRUCTURAL BEHAVIOUR OF CONCRETE FILLED COLD-FORMED STEEL CHANNEL WALL PANEL UNDER AXIAL LOADING
PHD GRADUATED CO-SUPERVISOR 2019
MUSAB NIMIR ALI SALIH
BEHAVIOUR OF COLD-FORMED COMPOSITE BEAM WITH BENT-UP BAR AS SHEAR CONNECTOR ENCASED WITH SELF-COMPACTING CONCRETE
PHD GRADUATED SUPERVISOR 2020
KHADAVI

PHD GRADUATED SUPERVISOR 2021
ELFI
PENGGUNAAN SISTEM BATA BERONGGA BERSILANGKAIT BAGI MENGATASI KELEWATAN PEMBINAAN BANGUNAN DI KEPULAUAN MENTAWAI
PHD GRADUATED SUPERVISOR 2022
FADHLUHARTINI BINTI HJ MUFTAH
STRUCTURAL BEHAVIOUR OF BUILT-UP COLD-FORMED STEEL COLUMN UNDER NORMAL TEMPERATURE AND STANDARD FIRE CONDITION.
PHD GRADUATED CO-SUPERVISOR 2022
ZELMI SRIYOLJA
 KERANGKA KERJA KONSULTAN PERANCANGAN PEMBINAAN UNTUK IMPLEMENTASI BUILDING INFORMATION MODELLING DI INDONESIA   
PHD ON GOING CO-SUPERVISOR
NORWATI BINTI JAMALUDDIN

MASTER ON GOING SUPERVISOR
AIRIL YASREEN B. MOHD YASSIN

MASTER ON GOING SUPERVISOR
LOO CHANG SOON

MASTER GRADUATED SUPERVISOR 2009
SALEH OMAR AHMED BAMAGA

MASTER GRADUATED SUPERVISOR 2010
WONG KAH LEONG
STRUCTURAL BEHAVIOUR OF PRE-FABRICATED COMPOSITE PAD FOOTING FOUNDATION USING COLD-FORMED STEEL LIPPED CHANNEL SECTIONS
MASTER GRADUATED SUPERVISOR 2010
SASAN PARNIANI

MASTER GRADUATED CO-SUPERVISOR 2010
MOHD HAIRIL BIN MOHD
FINITE ELEMENT FORMULATION FOR SEMI-RIGID BEAM-TO-COLUMN CONNECTIONS USING POTENTIAL ENERGY APPROACH
MASTER GRADUATED SUPERVISOR 2011
EMAD HOSSEIN POUR

MASTER GRADUATED SUPERVISOR 2012
ABUBAKAR SHARIF AUWALU
THE PERFORMANCE AND THE BEHAVIOUR OF STILL BOLT CONNECTED IBS COMPONENTS SUBJECTED TO SUDDEN IMPACT OF HYDRODYNAMIC FORCE WITH DEBRIS
MASTER GRADUATED SUPERVISOR 2013
MAHAMAT TIDJANI ADAM

MASTER GRADUATED SUPERVISOR 2013
ALI SALEH HUSSAIN HUSSAIN

MASTER GRADUATED SUPERVISOR 2014
MOHD NOH BIN RAMAN

MASTER GRADUATED SUPERVISOR 2014
TAHER YASEEN TAHER

MASTER GRADUATED SUPERVISOR 2015
TEE CHIN WEE
BEHAVIOUR OF AN INNOVATIVE CONNECTION USED IN STEEL STORAGE RACKING SYSTEMS
MASTER GRADUATED SUPERVISOR 2015
GAN HONG WEI
ECONOMIC AND STRUCTURAL PERFORMANCE OF CRUCIFORM COLUMN SECTION WITH END-PLATE CONNECTION.
MASTER GRADUATED CO-SUPERVISOR 2015
LOW JUN XIU

MASTER GRADUATED CO-SUPERVISOR 2016
KOO TING CHOONG

MASTER GRADUATED SUPERVISOR 2017