GRANT(PI & MEMBERS)

57

PUBLICATIONS

116

INDEXED PUBLICATION

81

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

INTERNATIONAL GRANTS
2
NATIONAL GRANTS
7
UNIVERSITY FUND
6
TOTAL

Publications

INDEXED PUBLICATION
81
NON-INDEXED PUBLICATION
11
OTHERS PUBLICATION
24
TOTAL

Supervisions

DEGREE
0
MASTER
17
PHD
15
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
MG2 - 15.1 : Optimation of Bioceramic BCP-SR-Ag Scaffold with Active Biological Ingredients Enhanced by Dental Pulp Stem Cell (DPSCs) CM
RUG OF UTM Matching Grant
2023
MG2 -15.0 : Optimation of Bioceramic BCP-SR-Ag Scaffold with Active Biological Ingredients Enhanced by Dental Pulp Stem Cell (DPSCs) CM
UNIVERSITAS AIRLANGGA Others-MG
2023
F4 4.1: Development of smart materials for orthopaedic degradable metallic implants
RUG OF UTM Geran Penyelidikan Hi-Tech(F4)
2022
DEVELOPMENT OF LOW-PROFILE LOCKING COMPRESSION PLATE IMPLANT FOR ANKLE FRACTURE PATIENT
OSA Technology Sdn. Bhd. Contract
2022
Diffusion-reaction modelling of ozonolysis kinetics on isolation of empty fruit bunch (EFB) to cellulose for the synthesis, characterization and mechanistic studies of cellulose nanocrystals.
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2021
Characteristic and potential osteogenesis of Chitosan-Gelatin-Carbonate Apatite scaffold composite based on Human teeth in Mesenchymal Stem Cell
UNIVERSITAS AIRLANGGA International Grant
2020
Effect of microarchitecture and mechanical properties of cancellous bone on cartilage diseases in human joint
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2020
PERFORMANCE MECHANISM OF 3D-PRINTED PLA SCAFFOLD COATED WITH HYDROXYAPATITE/FIBRIN NANOFIBERS FOR BONE ANGIOGENESIS
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2020
CNT-coated textile as strain sensor to measure Chest Wall Expansion
RUG OF UTM UTM Encouragement Research
2020
DESIGN AND DEVELOPMENT OF BIOACTIVE AND BIODEGRADABLE RARE EARTH FREE MG BASED ALLOYS AND COATINGS FOR THIRD GENERATION BIO-IMPLANT APPLICATIONS
ASEAN-INDIA SCIENCE & TECHNOLOGY DEVELOPMENT FUND (AISTDF) International Grant
2020
DESIGN & DEVELOPMENT OF DISINFECTION CHAMBER AND ISOPOD
RUG OF UTM UTM R&D Fund
2020
THE STUDY OF MECHANICAL PROPERTIES OF CANCELLOUS BONE AT THE KNEE JOINT
RUG OF UTM Matching Grant
2020
THE STUDY OF FATIGUE OF TEMPORARY BONE GRAFT UNDER DYNAMIC IMMERSION UNDER SIMULATED HUMAN CYCLIC LOADING
UNIVERSITAS SRIWIJAYA International Grant
2020
FUNDAMENTAL INVESTIGATION ON THE STRENGTH AND CORROSION PROPERTIES OF ABSORBABLE MAGNESIUM ALLOYS REINFORCED WITH CARBON NANOFIBER FOR MEDICAL IMPLANT APPLICATION
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2019
EXPLORING THE FUNCTIONS OF REAL-TIME MOTION ANALYSIS AND CONVOLUTIONAL NEURAL NETWORK FOR TALENT ANALYSIS IN ATHLETES
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2019
Dynamic Degradation Behavior of Porous Iron under Physiological Environment for Cancellous Bone Analogue
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2019
Mechanical degradation model of replication casted biodegradable scaffolds under static immersion
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2019
MRUN 5.3: VIRTUAL REALITY PRODUCT DESIGN PROCESS CONTENT FOR ENGINEERING AND TVET
MINISTRY OF EDUCATION MALAYSIA RESEARCH UNIVERSITY NETWORK
2018
MRUN 5.0 - VIRTUAL REALITY AND GAMIFICATION PLATFORM FOR ENGINEERING AND TVET ENGINEERING IN UNIVERSITY 4.0
MINISTRY OF EDUCATION MALAYSIA RESEARCH UNIVERSITY NETWORK
2018
UTM -TDR 4.3 (T2):The effectiveness of virtual reality gamification approach by using video motion analysis and physical fitness test in sports performance analysis
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 4.2(T1): Immersive Full Body Sensing and Haptic Feedback for Virtual Rowing Sports
RUG OF UTM UTM Transdiciplinary Research Grant
2018
COMPUTATIONAL APPROACH OF DYNAMIC DEGRADATION BEHAVIOUR OF POROUS MAGNESIUM UNDER PHYSIOLOGICAL ENVIRONMENT OF HUMAN CANCELLOUS BONE
RUG OF UTM Tier 1
2018
DYNAMIC MECHANICAL DEGRADATION MODEL OF TITANIA BIODEGRADABLE SCAFFOLDS
RUG OF UTM UTMShine
2017
THE IMPACT OF DYNAMIC DEGRADATION ON THE MORPHOLOGICAL AND MECHANICAL CHARACTERIZATION OF POROUS MAGNESIUM
RUG OF UTM Potential Academic Staff
2017
Optimum placement of piezo-polymer power harvester for epicardial pacemaker
RUG OF UTM Tier 1
2017
predicting the involve,emt of subchondral bone degenerative process in cartilage disease progression using advanced convertion pre-clinical imaging modality approach
MINISTRY OF EDUCATION Transdiscplinary Research Grant Scheme
2016
Mechanical degradation model of titania biodegradable tissue engineering scaffolds
RUG OF UTM Tier 1
2016
ANALYTICAL AND EXPERIMENTAL MODELLING OF DESOLVENTISATION SYSTEM FOR ECO OILS
ECOOILS SDN BHD Contract
2016
THE STUDY OF FATIGUE CRACK INITIATION GROWTH OF CANCELLOUS BONE UNDER CYCLIC LOADING
RUG OF UTM Tier 1
2016
COGNITIVE STUDY ON THE NATURE OF CREATIVITY IN DESIGN PROCESS
RUG OF UTM Tier 1
2015
EMERGENCY EVACUATION UTILISING 5D STEREOSCOPIC & AUGMENTED REALITY (EXIT-5DSAR) FOR FLOOD DISASTER
MINISTRY OF EDUCATION Prototype Development Research Grant Scheme
2015
Awareness of Cardiovascular Health To Enhance Human Performance In An Organization
RUG OF UTM Flagship
2015
Micro fluidic behavior of dimpled surface in metallic hip implant for tribological performnace
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2014
The Study of Degradation Process of Porous Magnesium for Cancellous Bone Substitute Application
RUG OF UTM Tier 1
2014
Aerodynamics Drag Testing and Immersive Virtual Reality Environment Indoor Training For potential Malaysian national Cyclists
RUG OF UTM Flagship
2014
Applicable Gait and Stability Assessment Device For Paralympian
RUG OF UTM Flagship
2014
APPLICABLE GAIT ASSESSMENT TOOL FOR CLINICAL PURPOSE
RUG OF UTM Tier 1
2014
3-D PEDAGOGICAL MODEL IN DIAGNOSING MATHEMATICAL DIFFICULTIES FOR DOWN SYNDROME STUDENTS
RUG OF UTM Tier 1
2014
Fabrication of mini tube for stent applications.
RUG OF UTM Tier 1
2014
Development of Dynamic rowing simulator for potential Malaysian National Rowers
RUG OF UTM Flagship
2014
Computational Multiscale approach of Smart Degradable Metal for Synthetic Cancellous Bone
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2013
Nanofluidic Wicking in Cellulosic Fibers Hierarchical Structure for Biomedical Micro Device
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2013
Three Dimensional (3D) Pedagogical Model In Diagnosing Learning Difficulties Of Fractions And Associated Number Sense For Dyslexic Students
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2013
DEVELOPMENT OF AN IMMERSIVE VIRTUAL REALITY ENVIRONMENT FOR HAND STROKE PATIENTS' DAILY LIVING ACTIVITIES (DLA)
MINISTRY OF EDUCATION Prototype Development Research Grant Scheme
2013
Smart Degradable Metal for Cancellous Bone Analogue? An exploration
MINISTRY OF EDUCATION Exploratory Research Grant Scheme
2012
COMPUTATIONAL FATIGUE STUDY OF BOVINE CANCELLOUS BONE
SHORT TERM RESEARCH GRANT FOR ACADEMIC VISITORS Academic Visitor
2012
FATIGUE LIFE PREDICTION IN TRABECULAR BONE DURING PHYSIOLOGICAL ACTIVITIES
RUG OF UTM Tier 1
2012
Mechanocompatible Locking Plate for Complex Fracture Fixation
RUG OF UTM Tier 1
2012
BASIC INVESTIGATION OF FLOW CHARACTERISTICS THROUGH TRABECULAR BONE USING FLUID STRUCTURE INTERACTION
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2012

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
The Effect Of Tortuosity On Permeability Of Porous Scaffold
BIOMEDICINES
Publication In Web Of Science UTM FIRST AUTHOR
2023
Variational Autoencoder Analysis Gas Sensor Array On The Preservation Process Of Contaminated Mussel Shells (Mytilus Edulis)
SENSING AND BIO-SENSING RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR
2023
Hard Tissue Repairing Potency Of Mesoporous Borosilicate Bioactive Glass: An In Vitro Assessment
JOURNAL OF NON-CRYSTALLINE SOLIDS
Publication In Web Of Science CO-AUTHOR
2023
Level Of Activity Changes Increases The Fatigue Life Of The Porous Magnesium Scaffold, As Observed In Dynamic Immersion Tests, Over Time
SUSTAINABILITY
Publication In Web Of Science UTM FIRST AUTHOR
2023
Effectiveness Of Ozone-Laser Photodynamic Combination Therapy For Healing Wounds Infected With Methicillin-Resistant Staphylococcus Aureus In Mice
VETERINARY WORLD
Publication In Web Of Science UTM FIRST AUTHOR
2023
Design And Application Of Near Infrared Led And Solenoid Magnetic Field Instrument To Inactivate Pathogenic Bacteria
MICROMACHINES
Publication In Web Of Science UTM FIRST AUTHOR
2023
2d Finite Element Deformation Investigation On Cocrmo-On-Cocrmo Bearing Of Total Hip Implant Under Normal Walking Condition
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2023
Design Optimization Of Shell And Tube Heat Exchangers: Effect Of Baffles Design
ADVANCED STRUCTURED MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2023
Effect Of 3d Printing Process Parameters On Flexural Strength Of Mixing Pla And Pcl Polymer
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2023
The Effect Of Tortuosity On Wall Shear Stress Of Porous Scaffold
CFD LETTERS
Publication In Scopus UTM FIRST AUTHOR
2023
Von Mises Stress Analysis Of Cocrmo-On-Cocrmo Hip Prosthesis Based On Body Mass Index: 2d Fem Estimation
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2023
The Compressive Strength And Static Biodegradation Rate Of Chitosan-Gelatin Limestone-Based Carbonate Hydroxyapatite Composite Scaffold
DENTAL JOURNAL
Publication In Scopus UTM FIRST AUTHOR
2023
Von Mises Stress Evaluation Of Cocrmo-On-Cocrmo Bearing In Total Hip Replacement During Normal Walking Using 2d Finite Element Strategy
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2023
Influence Of Hybrid Pore Size Of Porous Magnesium For Bone Scaffold Application
REINFORCED AND POROUS MATERIALS FOR STRUCTURAL APPLICATIONS
Book Chapter CO-AUTHOR
2023
Study Of Locking Compression Plate Through Biodegradable Implant
JOURNAL OF MEDICAL DEVICE TECHNOLOGY
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2022
Rowing Biomechanics, Physiology And Hydrodynamic: A Systematic Review
INTERNATIONAL JOURNAL OF SPORTS MEDICINE
Publication In Web Of Science CO-AUTHOR
2022
An In-Vivo Study Of Photobiomodulation Using 403 Nm And 649 Nm Diode Lasers For Molar Tooth Extraction Wound Healing In Wistar Rats
ODONTOLOGY
Publication In Web Of Science UTM FIRST AUTHOR
2022
Deep-Freezing Temperatures During Irradiation Preserves The Compressive Strength Of Human Cortical Bone Allografts: A Cadaver Study
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR
2022
Influence Of Bone Marrow Characteristic And Trabecular Bone Morphology On Bone Remodelling Process With Fsi Approach
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Fluid Flow Analysis Of Integrated Porous Bone Scaffold And Cancellous Bone At Different Skeletal Sites: In Silico Study
TRANSPORT IN POROUS MEDIA
Publication In Web Of Science CO-AUTHOR
2022
The Characteristics, Swelling Ratio And Water Content Percentage Of Chitosan-Gelatin/Limestone-Based Carbonate Hydroxyapatite Composite Scaffold
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Mechanical Behaviour Of Cancellous Bone: Compression And Three-Point Bending Test
MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Gas Array Sensors Based On Electronic Nose For Detection Of Tuna (Euthynnus Affinis) Contaminated By Pseudomonas Aeruginosa
JOURNAL OF MEDICAL SIGNALS & SENSORS
Publication In Web Of Science UTM FIRST AUTHOR
2022
An Improved Kalman Filter In Photoplethysmography Dc Component Denoising For Cardiorespiratory Analysis
RAWAL MEDICAL JOURNAL
Publication In Web Of Science UTM FIRST AUTHOR
2022
The Characteristics And Potency Of Limestone-Based Carbonate Hydroxyapatite To Viability And Proliferation Of Human Umbilical Cord Mesenchymal Stem Cell
RESEARCH JOURNAL OF PHARMACY AND TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2022
Deformation Analysis Of Cocrmo-On-Cocrmo Hip Implant Based On Body Mass Index Using 2d Finite Element Procedure
JOURNAL OF PHYSICS: CONFERENCE SERIES
Publication In Scopus UTM FIRST AUTHOR
2022
A Simple And Low-Cost Photocatalytic Air Purification Test Method
JOURNAL OF PHYSICS: CONFERENCE SERIES
Publication In Scopus UTM FIRST AUTHOR
2022
Odor Clustering Using A Gas Sensor Array System Of Chicken Meat Based On Temperature Variations And Storage Time
SENSING AND BIO-SENSING RESEARCH
Publication In Scopus UTM FIRST AUTHOR
2022
Wear Analysis Of Acetabular Cup On Metal-On-Metal Total Hip Arthroplasty With Dimple Addition Using Finite Element Method
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2022
Optimization Of Fdm 3d Printing Process Parameter For Improving Porosity Accuracy Of Pla Scaffold
PROCEEDINGS OF THE 4TH FORUM IN RESEARCH, SCIENCE AND TECHNOLOGY (FIRST-T1-T2-2020)
Proceedings UTM FIRST AUTHOR
2021
Fatigue Prediction Of Porous Magnesium Bone Scaffold Using Finite Element Method
PROCEEDINGS OF THE 4TH FORUM IN RESEARCH, SCIENCE, AND TECHNOLOGY (FIRST-T1-T2-2020)
Proceedings CO-AUTHOR
2021
Contact Pressure Analysis Of Acetabular Cup Surface With Dimple Addition On Total Hip Arthroplasty Using Finite Element Method
2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH AND APPLICATION (ICOMERA 2020) 7TH–9TH OCTOBER 2020, MALANG, INDONESIA
Conference Paper CO-AUTHOR
2021
Fluid–Structure Interaction (Fsi) Modeling Of Bone Marrow Through Trabecular Bone Structure Under Compression
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY
Publication In Web Of Science CORRESPONDING AUTHOR
2021
Permeability Study Of Functionally Graded Scaffold Based On Morphology Of Cancellous Bone
MALAYSIAN JOURNAL OF MEDICINE AND HEALTH SCIENCES (MJMHS)
Publication In Scopus UTM FIRST AUTHOR
2021
Effect Of Mo Addition On The Pitting Resistance Of Timn Alloys In Hanks’ Solution
JOURNAL OF ALLOYS AND COMPOUNDS
Publication In Web Of Science UTM FIRST AUTHOR
2021
The Effect Of Bottom Profile Dimples On The Femoral Head On Wear In Metal-On-Metal Total Hip Arthroplasty
JOURNAL OF FUNCTIONAL BIOMATERIALS
Publication In Web Of Science CO-AUTHOR
2021
Gas Sensor Array To Classify The Chicken Meat With E. Coli Contaminant By Using Random Forest And Support Vector Machine
BIOSENSORS AND BIOELECTRONICS: X
Publication In Scopus UTM FIRST AUTHOR
2021
Kinetic And Dynamic Analysis Of Ozonolysis Pre-Treatment Of Empty Fruit Bunch In A Well-Mixed Reactor For Sugar Production
ENERGY CONVERSION AND MANAGEMENT
Publication In Web Of Science CO-AUTHOR
2021
Controllable Macroscopic Architecture Of Subtractive Manufactured Porous Iron For Cancellous Bone Analogue: Computational To Experimental Validation
JOURNAL OF BIONIC ENGINEERING
Publication In Web Of Science CO-AUTHOR
2020
In Silico Study Of Glenoid Perforation During Total Shoulder Arthroplasty: The Effects On Stress & Micromotion
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
Publication In Web Of Science CO-AUTHOR
2020
Mechanical Degradation Model Of Porous Magnesium Scaffolds Under Dynamic Immersion
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS
Publication In Web Of Science CO-AUTHOR
2020
Influence Of Dimple Depth On Lubricant Thickness In Elastohydrodynamic Lubrication For Metallic Hip Implants Using Fluid Structure Interaction (Fsi) Approach
MALAYSIAN JOURNAL OF MEDICINE AND HEALTH SCIENCES
Publication In Scopus CO-AUTHOR
2020
Effect Of Including Periodic Boundary Condition On The Fatigue Behaviour Of Cancellous Bone
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING
Publication In Scopus CO-AUTHOR
2020
Mechanical Degradation Model Of Porous Fe Scaffold: Simulation Approach
JOURNAL OF PHYSICS: CONFERENCE SERIES
Publication In Scopus UTM FIRST AUTHOR
2020
The Analysis Of Wear On Artificial Hip Joint With Dimple On Femoral Surface
JOURNAL OF PHYSICS: CONFERENCE SERIES
Publication In Scopus UTM FIRST AUTHOR
2020
Impacts Of Dynamic Degradation On The Morphological And Mechanical Characterisation Of Porous Magnesium Scaffold
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY
Publication In Web Of Science CO-AUTHOR
2019
The Antifungal Agent Of Silver Nanoparticles Activated By Diode Laser As Light Source To Reduce C. Albicans Biofilms: An In Vitro Study
LASERS IN MEDICAL SCIENCE
Publication In Web Of Science UTM FIRST AUTHOR
2019
Developing Functionally Graded Pva Hydrogel Using Simple Freeze-Thaw Method For Artificial Glenoid Labrum
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
Publication In Web Of Science CO-AUTHOR
2019
The Analysis Of The Dimple Arrangement Of The Artificial Hip Joint To The Performance Of Lubrication
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Photodynamic Effectiveness Of Laser Diode Combined With Ozone To Reduce Staphylicoccus Aureus Biofilm With Exogenous Chlorophyll Of Dracaena Angustifolia Leaves
BIOMEDICAL PHOTONICS
Publication In Scopus UTM FIRST AUTHOR
2019
The Analysis Of Dimple Geometry On Artificial Hip Joint To The Performance Of Lubrication
JOURNAL OF PHYSICS: CONFERENCE SERIES
Publication In Scopus UTM FIRST AUTHOR
2019
Synthesis And Characterization Of Nanohydroxyapatite-Gelatin Composite With Streptomycin As Antituberculosis Injectable Bone Substitute
INTERNATIONAL JOURNAL OF BIOMATERIALS
Publication In Scopus UTM FIRST AUTHOR
2019
Study Of Dynamic Degradation Behaviour Of Porous Magnesium Under Physiological Environment Of Human Cancellous Bone
CORROSION SCIENCE
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Sol-Gel Grown Mgo-Zno-Tricalcium-Phosphate Nanobioceramics: Evaluation Of Mechanical And Degradation Attributes
CORROSION SCIENCE
Publication In Web Of Science CO-AUTHOR
2018
Analysis Of Oar Blade Hydrodynamics For Rowing Propulsive Mechanism: Experiment And Computational Fluid Dynamics Simulation
INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING (I.RE.M.E)
Publication In Scopus CO-AUTHOR
2018
The Effect Of Morphology On The Biodegradation Behavior Of Porous Magnesium Bone Scaffold
E3S WEB OF CONFERENCES
Publication In Scopus UTM FIRST AUTHOR
2018
Cancellous Bone Mechanical Characterization And Finite Element Simulation
ADVANCED STRUCTURED MATERIALS
Publication In Scopus CORRESPONDING AUTHOR
2018
The Effect Of Degradation Time Variation On Porous Magnesium Implant Bone Scaffold
E3S WEB OF CONFERENCES
Publication In Scopus UTM FIRST AUTHOR
2018
Different Material Properties Of Cancellous Bone Influence Glenoid Component Loosening: A Finite Element Study
PROCEEDINGS OF INTERNATIONAL MEDICAL DEVICE AND TECHNOLOGY CONFERENCE
Proceedings CO-AUTHOR
2017
Epoxy Resin Characterization For Imaging Phantom: X-Ray, Textural, And Mechanical Properties
IEEE-EMBS CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES
Publication In Scopus CO-AUTHOR
2017
The Effect Of Flow Rate Characteristic On Biodegradation Of Bone Scaffold
PROCEEDINGS OF INTERNATIONAL MEDICAL DEVICE AND TECHNOLOGY CONFERENCE
Proceedings UTM FIRST AUTHOR
2017
Polyethylene Wear In Total Ankle Replacement Is Influenced By Its Radial Curvature: A Computational Wear Simulation Study
PROCEEDINGS OF INTERNATIONAL MEDICAL DEVICE AND TECHNOLOGY CONFERENCE
Proceedings CO-AUTHOR
2017
A Comparison Of Degradation Rate Bone Scaffold Morphology Between Computer Simulation And Experimental Approach
PROCEEDINGS OF INTERNATIONAL MEDICAL DEVICE AND TECHNOLOGY CONFERENCE
Proceedings UTM FIRST AUTHOR
2017
Finite Element Analysis Of 2-Station Hip Simulator
JOURNAL OF PHYSICS: CONFERENCE SERIES
Journal Article Non Citation-Indexed CO-AUTHOR
2017
Design Of Biped Hip Simulator Using Solidworks
JOURNAL OF PHYSICS: CONFERENCE SERIES
Journal Article Non Citation-Indexed CO-AUTHOR
2017
A Questionnaire-Based Approach On Technology Acceptance Model For Integrated Multiple Ankle Technology Device On Patient Psychology
SCIENCE HUMANIKA
Journal Article Non Citation-Indexed CO-AUTHOR
2017
Number Of Pegs Influence Focal Stress Distributions And Micromotion In Glenoid Implants: A Finite Element Study
MEDICAL AND BIOLOGICAL ENGINEERING AND COMPUTING
Publication In Web Of Science CO-AUTHOR
2017
Mg-Based Porous Metals As Cancellous Bone Analogous Material: A Review
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
Publication In Web Of Science CORRESPONDING AUTHOR
2017
The Influence Of Flow Rates On The Dynamic Degradation Behaviour Of Porous Magnesium Under A Simulated Environment Of Human Cancellous Bone
MATERIALS AND DESIGN
Publication In Web Of Science CORRESPONDING AUTHOR
2017
Different Material Properties Of Cancellous Bone Influence Analysis Of Glenoid Component Loosening: A Finite Element Study
MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES
Publication In Web Of Science CO-AUTHOR
2017

QUANTITATIVE AND QUALITATIVE FACTORS THAT LEADS TO SLIP AND FALL INCIDENTS
Book (Text) CORRESPONDING AUTHOR
2017
Application Of Fitt Principle In Ankle Exercise Rehabilitation
TECHNOLOGY ADVANCEMENT IN MEDICAL ENGINEERING
Book Chapter CO-AUTHOR
2017
Three-Dimensional Advance Dynamic Culture System Promotes Microvessel Development From Cultured Endothelial Cells In Vitro
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus CO-AUTHOR
2017
Mechanical Degradation Model Of Biodegradable Scaffolds: A Computational Approach
PROCEEDINGS OF INTERNATIONAL MEDICAL DEVICE AND TECHNOLOGY CONFERENCE
Proceedings CO-AUTHOR
2017

WEAR PREDICTION ON TOTAL ANKLE REPLACEMENT
Original Book CORRESPONDING AUTHOR
2016

FINITE ELEMENT ANALYSIS ON BADMINTON RACKET DESIGN PARAMETERS
Original Book CORRESPONDING AUTHOR
2016

MULTI-AXIAL FATIGUE OF TRABECULAR BONE WITH RESPECT TO NORMAL WALKING
Original Book CORRESPONDING AUTHOR
2016

FACTORS FOR SLIP AND FALL INCIDENTS IN MANUFACTURING INDUSTRY
Original Book CO-AUTHOR
2016
Analysis On Stress And Micromotion On Various Peg Fixation At Glenoid Implant
TRIBOLOGY - MATERIALS, SURFACES AND INTERFACES
Publication In Scopus CO-AUTHOR
2016
Gait Asymmetry In Biped Hip Simulator Design
JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Journal Article Non Citation-Indexed CO-AUTHOR
2016
Effect Of Torsional Loading On Compressive Fatigue Behaviour Of Trabecular Bone
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
Publication In Web Of Science CORRESPONDING AUTHOR
2016
Dynamic Degradation Of Porous Magnesium Under A Simulated Environment Of Human Cancellous Bone
CORROSION SCIENCE
Publication In Web Of Science CORRESPONDING AUTHOR
2016
Biped Hip Simulator For Human Walking Cycles
JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2016
A Questionnaire Approach Based On The Technology Acceptance Model For Integrated Multiple Angkle Technology Device On Patient Psychology And Progress Application
INTERNATIONAL CONFERENCE OF PSYCHOLOGY AND SOCIAL SCIENCE (ICPSS) 2015
Proceedings CO-AUTHOR
2015
A Narrative Review Of Morphology Of Cancellous Bone At Different Human Anatomy- Methods And Parameters
APPLIED MECHANICS AND MATERIALS
Proceedings CORRESPONDING AUTHOR
2015
Effect Of Radial And Thickness Of Polyethylene On Wear Generation In Total Ankle Replacement
MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015
Conference Paper CO-AUTHOR
2015
The Influence Of Peg Designs On Glenoid Component: A Finite Element Study
MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015
Conference Paper CO-AUTHOR
2015
Numerical Analysis On Fatigue Life Prediction Of Cancellous Bone Respect To Normal Walking Loading
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2015
Perception Study On Leading Factors Of Slip And Fall Incidents In Manufacturing Industry
PROCEDIA MANUFACTURING
Publication In Scopus CO-AUTHOR
2015
Uniaxial And Multiaxial Fatigue Life Prediction Of The Trabecular Bone Based On Physiological Loading: A Comparative Study
ANNALS OF BIOMEDICAL ENGINEERING
Publication In Web Of Science CORRESPONDING AUTHOR
2015
Floor Slipperiness Measurement Under Spillage Condition
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2015
Development Of Integrated Multiple Ankle Technology Device And Apps Database For Neuromuscular Control
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2015
A Novel Hybrid Rehabilitation Device For Neuromuscular Control Exercise And Rehabilitation Training
PROCEDIA COMPUTER SCIENCE
Publication In Scopus CORRESPONDING AUTHOR
2015
Permeability Study Of Cancellous Bone And Its Idealised Structures
MEDICAL ENGINEERING & PHYSICS
Publication In Web Of Science CORRESPONDING AUTHOR
2015
The Effect Of Shaft Cross-Sectional Design On Racket Performance
AN INTERNATIONAL CONFERENCE IN SPORT SCIENCE AND TECHNOLOGY
Conference Paper CO-AUTHOR
2014
The Effectiveness Of Fitt Principle In Exercise Rehabilitation Focusing On Common Sports Injuries Among Malaysian Athletes
MOVEMENT, HEALTH & EXERCISE CONFERENCE 2014 (MOHE 2014)
Conference Paper CO-AUTHOR
2014
Finite Element Analysis: The Effect Of Racket Strutural Stiffness To The Badminton Racket Performance
MOVEMENT, HEALTH & EXERCISE CONFERENCE 2014 (MOHE 2014)
Conference Paper CORRESPONDING AUTHOR
2014
Numerical Modeling Of The Rowing Sport Propulsive Mechanism Under Different Blade Designs
AN INTERNATIONAL OF SPORT SCIENCE AND TECHNOLOGY
Conference Paper CO-AUTHOR
2014
Fluid Structure Interaction Of Rowing Blade For Hydrodynamic Propulsion To Enhance Rowing Performance
MOVEMENT, HEALTH & EXERCISE CONFERENCE 2014 (MOHE 2014)
Conference Paper CORRESPONDING AUTHOR
2014
Influence Of Polyethylene Thickness On Axis Pin In Linked Elbow Implant
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2014
3d-Cybertherapy And Immersive Learning Environments For Hand Stroke Patients Daily Living Activities
INTERNATIONAL JOURNAL OF COMPUTER AND INFORMATION TECHNOLOGY
Journal Article Non Citation-Indexed CO-AUTHOR
2014
Study The Effect Of Fluid Medium Toward Synthetic Cancellous Bone Structure
ADVANCED MATERIALS RESEARCH
Publication In Scopus CORRESPONDING AUTHOR
2014
Finite-Element Study On Effect Of String Tension Toward Coefficient Of Restitution Of A Badminton Racket String-Bed
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2014
Finite Element Simulation: The Effects Of Loading Modes At Different Anatomical Sites Of Trabecular Bone On Morphological Indices
ADVANCED MATERIALS RESEARCH
Publication In Scopus CORRESPONDING AUTHOR
2014
Study Of Wear Prediction On Total Ankle Replacement
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2014
The Influence Of Peer-To-Peer Social Networks And Computer Supported Collaborative Learning (Cscl) In Mathematics
INTERNATIONAL JOURNAL OF MATHEMATICS AND COMPUTER APPLICATIONS RESEARCH
Journal Article Non Citation-Indexed CO-AUTHOR
2014
Anthropometric Measurements Of The Human Distal Femur: A Study Of The Adult Malay Population
BIOMED RESEARCH INTERNATIONAL
Publication In Web Of Science CORRESPONDING AUTHOR
2013
Permeability Studies Of Artificial And Natural Cancellous Bone Structures
MEDICAL ENGINEERING & PHYSICS
Publication In Web Of Science CO-AUTHOR
2013
Effect Of Humeral Stem Shape On Displacement In Elbow Implant
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2013
Influence Of Lubrication Performance On Wear Factor In Metal-On-Metal Hip Joint Replacement Using Numerical Analysis
PROCEDIA ENGINEERING
Publication In Web Of Science CO-AUTHOR
2013
Mechanical Properties Of Trabecular Bone Through Compression And Combined Compression-Torsion Test: A Comparative Study
APPLIED MECHANICS AND MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2013
High-Gain Pre-Transduction Strain Amplification Inspired From The Dome Shape Structure Of Insect Campaniform Sensillum
2013 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS, BIOMIMETICS, AND INTELLIGENT COMPUTATIONAL SYSTEMS (ROBIONETICS)
Publication In Web Of Science CO-AUTHOR
2013
Numerical Analysis Of Bovine Trabecular Bone By Using Physiological Loads With Specific To Normal Walking And Down Stairs Loads
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2012
Fatigue Life Prediction In A Cancellous Bone Structure
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2012
Comparison Of Permeability On The Actual And Ideal Cancellous Bone Microstructure
CFD LETTERS
Publication In Scopus CORRESPONDING AUTHOR
2009
Micro-Modelling And Analysis Of Actual And Idealized Cancellous Structure
IFMBE PROCEEDINGS
Publication In Web Of Science CO-AUTHOR
2008

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name Grant Register No. IP Level IP Category
CANCELLOUS BONE SAMPLE ALIGNMENT JIG MY- 149253-A NATIONAL PATENT
WRIST JOINT SIMULATOR WITH ALLOWANCE ACTUAL PHYSIOLOGICAL LOADING CONDITION MY-145391-A NATIONAL PATENT
SPINE JOINT SIMULATOR WITH ALLOWANCE ACTUAL PHYSIOLOGICAL LOADING CONDITION MY-145061-A NATIONAL PATENT
SHOULDER SIMULATOR WITH ALLOWANCE ACTUAL PHYSIOLOGICAL LOADING CONDITION MY-145392-A NATIONAL PATENT
KNEE JOINT SIMULATOR WITH ALLOWANCE ACTUAL PHYSIOLOGICAL LOADING CONDITION MY- 147884-A NATIONAL PATENT
ARTIFICIAL HUMAN HIP JOINT TRIBO SIMULATOR MY- 147885-A NATIONAL PATENT
ARTIFICIAL HUMAN ELBOW JOINT TRIBO SIMULATOR MY- 146303-A NATIONAL PATENT
WRIST JOINT MINI TRIBO SIMULATOR MY-143845-A NATIONAL PATENT
ARTIFICIAL HUMAN KNEE JOINT MINI TRIBO SIMULATOR MY-164239-A NATIONAL PATENT
ELBOW JOINT MINI TRIBO SIMULATOR MY- 152579-A NATIONAL PATENT
HIP JOINT MINI TRIBO SIMULATOR MY-168009-A NATIONAL PATENT
WEAR AND STRENGTH SIMULATOR FOR HIP IMPLANTS FEATURING BIOREACTOR MY-167630-A NATIONAL PATENT
ANKLE JOINT MINI TRIBO SIMULATOR MY-151789-A NATIONAL PATENT
NEW DESIGN RETAINER FOR LOW EMISSION BURNER 09-01344-0303 NATIONAL INDUSTRIAL DESIGN
NEW DESIGN RETAINER FOR LOW EMISSION BURNER 09-01343-0203 NATIONAL INDUSTRIAL DESIGN
NEW DESIGN RETAINER FOR LOW EMISSION BURNER 09-01342-0103 NATIONAL INDUSTRIAL DESIGN
DISINFECTION CHAMBER NATIONAL INDUSTRIAL DESIGN
PROSES REKABENTUK DI DALAM PENGAJARAN DAN PEMBELAJARAN TVET LY2020005466 NATIONAL COPYRIGHT
VIDEO UTM IHUMEN: 2020 IN REVIEW FM2021E03335 NATIONAL COPYRIGHT
SOFTWARE OF NUMBER SENSE NATIONAL COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
MOHD AL-FATIHHI BIN MOHD SZALI JANUDDI
MONOTONIC AND CYCLIC BEHAVIOUR OF TRABECULAR BONE UNDER UNIAXIAL AND MULTIAXIAL LOADING
PHD GRADUATED CO-SUPERVISOR 2015
AMIR PUTRA BIN MD SAAD
DYNAMIC DEGRADATION OF POROUS MAGNESIUM UNDER A SIMULATED ENVIRONMENT OF HUMAN CANCELLOUS BONE
PHD GRADUATED SUPERVISOR 2016
HADAFI FITRI BIN MOHD LATIP
APPLICATION OF FITT PRINCIPLE IN EXERCISE REHABILITATION ON ANKLE SPRAIN
PHD GRADUATED CO-SUPERVISOR 2016
RABIATUL ADIBAH BINTI ABDUL RAHIM
COMPUTATIONAL MODELLING OF TRABECULAR BONE STRUCTURE USING FLUID STRUCTURE INTERACTION APPROACH
PHD GRADUATED SUPERVISOR 2017
AB AZIZ BIN MOHD YUSOF
ROWING PROPULSIVE MECHANISM BASED ON ROWER BIOMECHANICS AND BLADE HYDRODYNAMICS
PHD GRADUATED CO-SUPERVISOR 2017
MOHD RAMDAN BIN MOHD ROFI
DEVELOPMENT OF AN INTEGRATED TISSUE ENGINEERING BIOREACTOR SYSTEM FOR MICROVESSEL DEVELOPMENT IN A 3D ENVIRONMENT
PHD GRADUATED CO-SUPERVISOR 2019
NOOR JASMAWATI BT MAT NOOR
BI-LAYER BIOMIMETIC PROTEIN COATINGS ON HF-TREATED COMMERCIAL PURE MAGNESIUM FOR POTENTIAL BONE IMPLANT APPLICATIONS
PHD GRADUATED CO-SUPERVISOR 2020
MOHD SYAFIQ BIN MOHD SURI
LUBRICATION PERFORMANCE ANALYSIS USING FLUID-STRUCTURE INTERACTION SIMULATION FOR METAL-ON-METAL DIMPLED HIP JOINT
PHD GRADUATED CO-SUPERVISOR 2021
MUHAMMAD AZFAR BIN NOORDIN
MECHANICAL BEHAVIOUR OF BIODEGRADABLE POROUS IRON UNDER PHYSIOLOGICAL CONDITION FOR CANCELLOUS BONE REPLACEMENT
PHD GRADUATED CO-SUPERVISOR 2022
IZA AZURA BINTI ALI
THE ANALOGUE OF NEGATIVE POISSON’S RATIO STRUCTURE IN DESIGN OPTIMISATION OF CANCELLOUS BONE SCAFFOLD  
PHD ON GOING SUPERVISOR
SUMITA A/P THIYAGARAJAN
EFFECT OF DEGRADATION BEHAVIOUR TO BIOLOGICAL RESPONSE IN 3D DYNAMIC CELL CULTURE OF COMPOSITE BONE SCAFFOLD 
PHD ON GOING SUPERVISOR
FAKHRIZAL AZMY BIN NASRUDDIN
BIOMECHANICS CORRELATION ANALYSIS OF MALAYSIAN ELITE ROWERS ANTHROPOMETRY AND STROKE TECHNIQUES IN ROWING PERFORMANCE
PHD GRADUATED CO-SUPERVISOR 2024
FARAH AMIRA BINTI MOHD GHAZALI
THE ROLE OF ARTICULAR CARTILAGE, SUBCHONDRAL AND CANCELLOUS BONE BIOMECHANICS AND MICROARCHITECTURE EFFECTS ON OSTEOCHONDRAL UNIT PROPERTIES
PHD ON GOING SUPERVISOR
MAZHAR JAVED AWAN
AN EFFICIENT CLASSFICATION AND SEGMENTATION OF ANTERIOR CRUCIATE LIAGAMENT TEARS DIAGNOSIS USING MAGNETIC RESONANCE IMAGING  
PHD ON GOING CO-SUPERVISOR
NUR AQILA BINTI KADIR HUSSEIN
INFLUENCE OF CONICAL GRADED POROUS ARCHITECTURE ON THE TOPOLOGICAL, MECHANICAL, FLUID-FLOW PROPERTIES FOR BONE SCAFFOLD APPLICATION
PHD ON GOING CO-SUPERVISOR
ZAINAL ABIDIN ARSAT

MASTER GRADUATED CO-SUPERVISOR 2012
NUR DIANAH BINTI ABDUL LATIFF

MASTER GRADUATED SUPERVISOR 2012
AB AZIZ BIN MOHD YUSOF
ENHANCING ROWING PERFORMANCE THROUGH THE RELATIONSHIP BETWEEN ROWER’S BIOMECHANICS AND BLADE HYDRODYNAMICS
MASTER GRADUATED CO-SUPERVISOR 2013
AMIR PUTRA BIN MD SAAD
DYNAMIC DEGRADATION OF POROUS MAGNESIUM UNDER SIMULATED ENVIRONMENT OF HUMAN CANCELLOUS BONE
MASTER GRADUATED CO-SUPERVISOR 2013
MOHD FAIDZUL AWWAL BIN AHMAD FADZIR

MASTER GRADUATED SUPERVISOR 2014
MOHAMMAD MOSTAKHDEMIN

MASTER GRADUATED SUPERVISOR 2014
NUR IZRIN BINTI MAHYON

MASTER GRADUATED CO-SUPERVISOR 2015
NORAZRIN AZWANI BINTI AHMAD
PERCEPTION AND EXPERIMENTAL ANALYSIS ON SLIP AND FALL IN INDUSTRIAL WORKPLACE
MASTER GRADUATED CO-SUPERVISOR 2016
MOHD IQMAL BIN MAMAT

MASTER GRADUATED SUPERVISOR 2017
MUHAMMAD FADLI ARIF
REHABILITATION APPLICATION PROGRAM FOR OBESITY ADOLESCENT USING STRUCTURAL EQUATION MODELLING
MASTER GRADUATED CO-SUPERVISOR 2017
MUHAMMAD REZZA BIN ZAINUDIN
IMPROVED ACETABULAR CUP HOLDER AND FEMORAL HEAD FOR BIPED HIP SIMULATOR DESIGN
MASTER GRADUATED CO-SUPERVISOR 2018
MUHAMMAD ADIB BIN MD NASIR
PERFORMANCE ANALYSIS OF NEW VALVE CONCEPTS FOR A ROTARY VANE COMPRESSOR BASED ON FLUID STRUCTURES INTERACTION
MASTER GRADUATED CO-SUPERVISOR 2018
NORLISA BINTI FRANCIS NORDIN
CREATIVE COGNITIVE PATTERN OF ENGINEERING DESIGNERS DURING CONCEPT GENERATION STAGE BASED ON LINKOGRAPHY ANALYSIS
MASTER GRADUATED CO-SUPERVISOR 2019
MUHAMMAD AZFAR BIN NOORDIN
DYNAMIC DEGRADATION BEHAVIOUR OF POROUS IRON UNDER PHYSIOLOGICAL CONDITION OF HUMAN CANCELLOUS BONE FOR CANCELLOUS BONE ANALOGUE
MASTER ON GOING CO-SUPERVISOR
MUHAMMAD IKRAM BIN MD FAZLI
FLEXION-EXTENSION AND ABDUCTION-ADDUCTION FRAME MODEL FOR BIPED HIP SIMULATOR
MASTER GRADUATED CO-SUPERVISOR 2020
MAXWELL CHAMBAKATA

MASTER GRADUATED SUPERVISOR 2022