UTM Scholar : DR. WONG KING JYE

GRANT(PI & MEMBERS)

33

PUBLICATIONS

82

INDEXED PUBLICATION

52

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

NATIONAL GRANTS

UNIVERSITY FUND

TOTAL

Publications

INDEXED PUBLICATION

NON-INDEXED PUBLICATION

OTHERS PUBLICATION

TOTAL

Supervisions

MASTER

PHD

TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name	Year
Hybrid Nanocomposite Coating of Reduced Graphene Oxide Molybdenum Disulphide in Bismaleimide Matrix for Resilient Contact Systems NIPPON SHEET GLASS International Grant	2021
New Damage-based Constitutive Equations for Strain Aging Phenomenon in Stranded Wire Ropes MINISTRY OF EDUCATION Fundamental Research Grant Scheme	2020
Effect of microarchitecture and mechanical properties of cancellous bone on cartilage diseases in human joint MINISTRY OF EDUCATION Fundamental Research Grant Scheme	2020
A New Traction-Separation Law for Fibre Bridging of Composite Laminates RUG OF UTM UTMShine	2020
CRG 29.0 : INVESTIGATING THE POTENTIAL USED OF TIN SLAG POLYMER CONCRETE FOR STRUCTURAL APPLICATION RESEARCH UNIVERSITY GRANT Collaborative Research Grant	2019
CRG29.4 BLAST AND BALLISTIC BEHAVIOUR OF TIN SLAG POLYMER CONCRETE STRENGTHENED WITH FRP FOR BUNKERS AND COMMAND POSTS IN ARMY UNIVERSITI MALAYSIA SARAWAK (UNIMAS) Collaborative Research Grant National	2019
CRG17.2 DEVELOPMENT OF WOVEN STEEL WIRE MESH FOR FRONT LAYERS PROTECTION MATERIALS IN FLEXIBLE BODY ARMOUR RUG OF UTM Collaborative Research Grant	2019
CRG17 DEVELOPMENT OF STAB AND BALLISTIC RESISTANCE FLEXIBLE BODY ARMOUR RUG OF UTM Collaborative Research Grant	2019
CRG17.1 DEVELOPMENT OF SHEAR THICKENING FLUIDS (STF) IMPREGNATED FABRIC RUG OF UTM Collaborative Research Grant	2019
Investigation of the mechanical and impact properties of hybrid steel fibre-reinforced polymer composites through various architectual modifications MINISTRY OF EDUCATION Fundamental Research Grant Scheme	2019
MECHANICAL CHARACTERIZATION OF FRP COMPOSITE LAMINATES UNDER FATIGUE LOADING CONDITIONS MINISTRY OF EDUCATION Fundamental Research Grant Scheme	2019
UTM-TDR 10.2 (T1): Fretting Wear Damage Model for Fatigue Life Prediction of Steel Wire Ropes RUG OF UTM UTM Transdiciplinary Research Grant	2018
UTM-TDR 13.2 (T2): Metal Sponge-based material development for load bearing component of resilient contact system. RUG OF UTM UTM Transdiciplinary Research Grant	2018
UTM-TDR 10: NEW GENERATION MATERIALS WITH ULTRAHIGH PERFORMANCE FOR HIGH IMPACT INDUSTRIES RUG OF UTM UTM Transdiciplinary Research Grant	2018
UTM-TDR 13.3 (T2): HIGH PERFORMANCE PERFLUOROPOLYETHER-BASED GREASE LUBRICATION SYSTEM RUG OF UTM UTM Transdiciplinary Research Grant	2018
A NEW THREE DIMENSIONAL FRACTURE CRITERION FOR MIXED-MODE DELAMINATION RUG OF UTM Tier 1	2018
EXPERIMENTAL AND ANALYTICAL BENDING BEHAVIOUR OF SANDWICH COMPOSITES BEAM WITH POLYURETHANE FOAM FILLED KENAF/FRP RECYCLATES CORE RUG OF UTM Tier 1	2017
IMPACT CHARACTERISTICS OF NATURAL FIBRE WOVEN FABRICS IMPREGNATED WITH A SHEAR THICKENING FLUID (STF) RUG OF UTM Tier 1	2017
DAMAGE ASSESSMENT OF LAMINATED COMPOSITES BY DIGITAL IMAGE CORRELATION TECHNIQUE RUG OF UTM Matching Grant	2016
SELF-CONTOURED COMPOSITE LAMINATES DESIGN USING POLAR METHOD RUG OF UTM Tier 1	2016
Fractal Fracture Mechanics Approach for Fatigue Life Prediction of Martensitic Steel Compressor Blades with Corrosion Pits RUG OF UTM Tier 1	2016
investigation of eco-composite materials energy dissipation behavior MINISTRY OF EDUCATION Fundamental Research Grant Scheme	2015
ADVANCED TESTING OF LAMINATED COMPOSITES FOR AEROSPACE PARTS AND ASSEMBLIES AEROSPACE MALAYSIA INNOVATION CENTRE Contract	2015
Mode III Participation in Mixed-mode Delamination of Composite Laminates RUG OF UTM Encouragement Grant	2015
SUSTAINABLE BIOMIMETICS DESIGN OF POLYMER COMPOSITE ROTOR SHAFT FOR HYDROKINETIC APPLICATION RUG OF UTM Tier 1	2015
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF NATURAL FIBER COMPOSITES UNDER LOW VELOCITY IMPACT AND CRUSHING RUG OF UTM Potential Academic Staff	2015
Moisture absorption characteristics in fibre reinforced composite laminates MINISTRY OF EDUCATION Fundamental Research Grant Scheme	2014
Fundamental Mechanisms of Fatigue Fracture for Nickel Free Titanium Alloys in Biomedical Applications MINISTRY OF EDUCATION Fundamental Research Grant Scheme	2014
Evaluation of cohesive parameters on the delamination behaviour of laminated composites RUG OF UTM Potential Academic Staff	2014
Design and construction of efficient body structure for electric vehicle RUG OF UTM Flagship	2011

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name	Year
Fiber Bridging Mechanism In Moisture-Induced Mode I Delamination In Carbon/Epoxy Composites: Finite Element Analysis And Experimental Investigation POLYMER COMPOSITES Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR	2023
Temperature Effects On The Low-Velocity Impact Of Fml Panels: Experimental And Numerical Analys INTERNATIONAL JOURNAL OF IMPACT ENGINEERING Publication In Web Of Science CO-AUTHOR	2023
Towards A Better Design Of Engineering Material REINFORCED AND POROUS MATERIALS FOR STRUCTURAL APPLICATIONS Book Chapter FIRST UTM CORRESPONDING AUTHOR	2023
Displacement Rate Effects On Mixed-Mode I/Ii Delamination Of Laminated Carbon/Epoxy Composites POLYMER TESTING Publication In Web Of Science CORRESPONDING AUTHOR	2022
Boundary Lubricity Of Vegetable-Oil-Derived Trimethylolpropane (Tmp) Ester LUBRICANTS Publication In Web Of Science CO-AUTHOR	2022
Preliminary Structural Design Of Coreless Spoiler By Topological Optimization PROCESSES Publication In Web Of Science CO-AUTHOR	2022
Experimental Investigation Of The Axial Crushing Response Of Flax/Glass Eco-Hybrid Self-Supporting Web Composites FIBERS Publication In Web Of Science CO-AUTHOR	2022
Preliminary Structural Design Of Coreless Spoiler By Topological Optimization 1ST INTERNATIONAL SEMINAR ON AERONAUTICS AND ENERGY 2021 Conference Paper CO-AUTHOR	2021
Experimental And Numerical Investigation Of Humid Ageing Effects On Cfrp Laminates Crashworthiness Behaviours INTERNATIONAL JOURNAL OF CRASHWORTHINESS Publication In Web Of Science CO-AUTHOR	2021
An Extended Thickness-Dependent Moisture Absorption Model For Unidirectional Carbon/Epoxy Composites POLYMERS Publication In Web Of Science CORRESPONDING AUTHOR	2021
Displacement Rate Effects On The Mode Ii Shear Delamination Behavior Of Carbon Fiber/Epoxy Composites POLYMERS Publication In Web Of Science CORRESPONDING AUTHOR	2021
Experimental And Numerical Analyses Of Temperature Effect On Glare Panels Under Quasi-Static Perforation COMPOSITE STRUCTURES Publication In Web Of Science CO-AUTHOR	2021
Thermal Delamination Modelling And Evaluation Of Aluminium–Glass Fibre-Reinforced Polymer Hybrid POLYMERS Publication In Web Of Science CO-AUTHOR	2021
Influence Of Hardener / Resin Ratio Towards Frictional Properties Of Fibre-Reinforced Epoxy Composite Laminates JOURNAL OF TRANSPORT SYSTEM ENGINEERING Journal Article Non Citation-Indexed CO-AUTHOR	2020
Effect Of Stacking Sequence On Mechanical Properties And Moisture Absorption Characteristic Of Hybrid Palf/Glass Fiber Composites Fibers and Polymers Publication In Web Of Science CO-AUTHOR	2020
Moisture Absorption Effects On Mode Ii Delamination Of Carbon/Epoxy Composites POLYMERS Publication In Web Of Science CORRESPONDING AUTHOR	2020
Stacking Sequence Effects On The Tensile Behaviour Of Quasi-Isotropic Composite LIGHTWEIGHT MATERIALS FOR STRUCTURAL APPLICATIONS Publication In Web Of Science CORRESPONDING AUTHOR	2020
Coreless Spoiler Structural Design And Analysisv AERONAUTICAL ANALYSIS VIA EXPERIMENTAL AND COMPUTATIONAL APPROACHES Publication In Web Of Science CO-AUTHOR	2020
Flexural Behaviour Of Quasi-Isotropic Quasi-Homogeneous Woven Glass/Polyester Composite Laminates LIGHTWEIGHT MATERIALS FOR STRUCTURAL APPLICATIONS Publication In Web Of Science CORRESPONDING AUTHOR	2020
Displacement Rate Dependence Of Acrylic Adhesive Bonded Carbon/Epoxy Composite Joints Under Mode I Loading PLASTICS, RUBBER AND COMPOSITES Publication In Web Of Science CORRESPONDING AUTHOR	2020
Effect Of Strain Rate And Moisture Content On Mechanical Properties Of Adhesively Bonded Joints JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Publication In Web Of Science CO-AUTHOR	2020
Experimental Study Of Temperature Effect On The Mechanical Properties Of Gfrp And Fml Interface ADVANCED STRUCTURED MATERIALS Publication In Scopus CO-AUTHOR	2020
Study Of Multi-Cell Thin-Walled Tube With Various Configuration Under Lateral Loading IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus UTM FIRST AUTHOR	2020
Moisture Absorption Effects On The Mechanical Properties Of Carbon/Epoxy Composites INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY Publication In Scopus CORRESPONDING AUTHOR	2020
Experimental Investigation Of The Axial Crushing Response Of Flax/Glass Eco-Hybrid Composites For Fuselage Subfloor Application PROCEEDINGS OF NUMERICAL ANALYSIS IN ENGINEERING 2019 / MECHANICAL ENGINEERING MULTI-CONFERENCE (MEMC) 2019 Proceedings CO-AUTHOR	2019
A Review On The Interfacial Characteristics Of Natural Fibre Reinforced Polymer Composites INTERFACES IN PARTICLE AND FIBRE REINFORCED COMPOSITES Book Chapter CORRESPONDING AUTHOR	2019
Modelling Transitions In Regimes Of Lubrication For Rough Surface Contact LUBRICANTS Publication In Web Of Science CO-AUTHOR	2019
Effects Of Moisture Absorption On The Different Modes Of Carbon/Epoxy Composites Delamination POLYMER DEGRADATION AND STABILITY Publication In Web Of Science CORRESPONDING AUTHOR	2019
Mode I Delamination Behaviour Of Carbon/Epoxy Composite At Different Displacement Rates COMPOSITES PART B: ENGINEERING Publication In Web Of Science CORRESPONDING AUTHOR	2019
Thermo-Mechanical Characterisation And Modelling Of Gfrp Laminated Aluminium COMPOSITES PART B: ENGINEERING Publication In Web Of Science CO-AUTHOR	2019
Lateral Crushing Of Single And Multi-Cell Thin-Walled Circular Tube Under A Quasi-Static Loading JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY Publication In Web Of Science CO-AUTHOR	2019
Aligned Discontinuous Carbon Fibre Tows In Hybrid Composites And Their Tensile Behaviour: An Experimental Study JOURNAL OF COMPOSITE MATERIALS Publication In Web Of Science CO-AUTHOR	2019
Tensile Behaviour Of Hybrid Composites Between Glass And Short Carbon Fibres JURNAL MEKANIKAL Journal Article Non Citation-Indexed CO-AUTHOR	2019
Humid Ageing Effects On The Crashworthiness Behaviours Of Cfrp Laminates SOUTHEAST ASIA WORKSHOP ON AEROSCPACE ENGINEERING 2019 Conference Paper CO-AUTHOR	2019
Interlaminar Fracture Toughness Of A Plain Weave Flax/Epoxy Composite PLASTICS, RUBBER AND COMPOSITES Publication In Web Of Science CORRESPONDING AUTHOR	2019
Numerical Modelling Strategies For Composite Structures Crashworthiness: A Review JOURNAL OF ADVANCED RESEARCH IN MATERIALS SCIENCE Journal Article Non Citation-Indexed CO-AUTHOR	2018
Mode I And Mode Ii Delamination Of Flax/Epoxy Composite Laminate MATEC WEB OF CONFERENCES Publication In Scopus CO-AUTHOR	2018
Mode I And Mode Ii Delamination Of A Chopped Strand Mat E-Glass Reinforced Vinyl Ester Composite PLASTICS, RUBBER AND COMPOSITES Publication In Web Of Science CORRESPONDING AUTHOR	2018
A Further Generalized Thickness-Dependent Non-Fickian Moisture Absorption Model Using Plain Woven Epoxy Composites POLYMER TESTING Publication In Web Of Science CORRESPONDING AUTHOR	2018
Experimental Investigation Of Tensile Properties Of Eco-Composite Laminates JURNAL MEKANIKAL Journal Article Non Citation-Indexed CO-AUTHOR	2018
Non-Fickian Absorption Characteristics Of Adhesive Joints: Capillary Effects And Residual Properties INTERNATIONAL JOURNAL OF INTEGRATED ENGINEEING Publication In Scopus CORRESPONDING AUTHOR	2018
Crashworthiness Behavior Of Eco-Hybrid Composite For Fuselage Subfloor Application 3RD SOUTH EAST ASIA WORKSHOP ON AEROSPACE ENGINEERING Conference Paper CO-AUTHOR	2018
The Influence Of Woven Density On Tensile Properties Of Hybrid Kenaf/Glass Composites JOURNAL OF APPLIED ENVIRONMENTAL AND BIOLOGICAL SCIENCES Journal Article Non Citation-Indexed CO-AUTHOR	2017
Mechanical Properties Of Bamboo And Bamboo Composites: A Review JOURNAL OF ADVANCED RESEARCH IN MATERIALS SCIENCE Journal Article Non Citation-Indexed CO-AUTHOR	2017
Interfacial Shear Strength Characterisation Of Alkali Treated Bamboo Bundle - Polyester Composites Using An Improved Technique PLASTICS, RUBBER AND COMPOSITES Publication In Web Of Science CORRESPONDING AUTHOR	2017
Cohesive Zone Modelling Of Mode Iii Delamination Using The Edge Crack Torsion Test JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES Publication In Scopus CORRESPONDING AUTHOR	2017
Numerical Simulations Of Mixed-Mode Ii+Iii Delamination In Carbon/Epoxy Composite Laminate COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE Publication In Scopus CORRESPONDING AUTHOR	2017
Crack Length Dependence Of Mode Iii Delamination Using Edge Crack Torsion Test INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH Publication In Scopus CORRESPONDING AUTHOR	2017
Mixed-Mode Delamination Failures Of Quasi-Isotropic Quasi-Homogeneous Carbon/Epoxy Lamianted Composite FAILURE ANALYSIS AND PREVENTION Book Chapter CO-AUTHOR	2017
Mixed-Mode Delamination Failures Of Quasi-Isotropic Quasi-Homogeneous Carbon/Epoxy Laminated Composite FAILURE ANALYSIS AND PREVENTION Book Chapter CORRESPONDING AUTHOR	2017
Delamination Behaviour Of Carbon/Epoxy Composites STRUCTURAL COMPOSITES: MECHANICAL PROPERTIES AND BEHAVIOUR Book Chapter CORRESPONDING AUTHOR	2017
Flexural And Interlaminar Shear Study Of Hybrid Woven Kenaf/Recycled Gfrp (Rgfrp) Composites Subjected To Bending Load INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES Publication In Web Of Science CO-AUTHOR	2017
Numerical Simulation Methodology For Mode Ii Delamination Of Quasi-Isotropic Quasi-Homogeneous Composite Laminates JOURNAL OF COMPOSITE MATERIALS Publication In Web Of Science CORRESPONDING AUTHOR	2017
Impact Resistance Of Short Bamboo Fibre Reinforced Polyester Concretes PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS Publication In Web Of Science CORRESPONDING AUTHOR	2017
Compressive Properties Of Hawaiian Gold Timber Bamboo Under Different Conditions JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS Journal Article Non Citation-Indexed CO-AUTHOR	2016
Mechanical Properties Of Hybrid Woven Kenaf/Recyclate Glass Fibre Reinforced Polyester Composites JOURNAL OF BUILT ENVIRONMENT, TECHNOLOGY AND ENGINEERING Journal Article Non Citation-Indexed CO-AUTHOR	2016
Thickness-Dependent Non-Fickian Moisture Absorption In Epoxy Molding Compounds MICROELECTRONICS RELIABILITY Publication In Web Of Science CORRESPONDING AUTHOR	2016
Moisture Effects On Patch Bonded Composite Repairs KEY ENGINEERING MATERIALS Publication In Scopus CORRESPONDING AUTHOR	2016
Reparability Of Carbon/Epoxy Composite Laminate ENGINEERING MATERIALS FOR SPECIFIC APPLICATION: MECHANICAL PROPERTIES Book Chapter CORRESPONDING AUTHOR	2016
Reparability Of Carbon/Epoxy Composite Laminate ENGINEERING MATERIALS FOR SPECIFIC APPLICATION MECHANICAL PROPERTIES Book Chapter CORRESPONDING AUTHOR	2016
Influence Of Alkali Treatment On The Interfacial Properties Of Bamboo/Polyester Composites RECENT PATENTS ON MECHANICAL ENGINEERING Publication In Scopus CORRESPONDING AUTHOR	2016
Compressive Behaviour Of Bamboo Plate ENGINEERING MATERIALS FOR SPECIFIC APPLICATION: MECHANICAL PROPERTIES Book Chapter CO-AUTHOR	2016
Mechanical Behaviour Of Unbalanced Woven Kenaf Reinforced Polyester Composites 6TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE AND HUMANITIES (IGCESH) 2016 Proceedings CO-AUTHOR	2016
Mode Ii Delamination Of Chopped Strand Mat E-Glass Reinforced Vinyl Ester Composite 1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016 Proceedings CORRESPONDING AUTHOR	2016
Crashworthiness Behavior Of Pure Bamboo Plate 1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016 Proceedings CO-AUTHOR	2016
Experimental Investigation Of Pure Bamboo Plate Under Quasi-Static Indentation Test JOURNAL OF TRANSPORT SYSTEM ENGINEERING Journal Article Non Citation-Indexed CO-AUTHOR	2015
Influence Of Water Absorption On Mode I Delamination In Carbon/Epoxy Composite Laminates INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND ADVANCED MATERIAL (ICME-AM 2015) Conference Paper CORRESPONDING AUTHOR	2015
Characterisation Of Moisture Absorption Effects On The Strength Of Composite Materials ADVANCED MATERIALS RESEARCH Proceedings CORRESPONDING AUTHOR	2015
Interlaminar Damage Behavior Of Cfrp Composite Laminates Under Cyclic Shear Loading Conditions ADVANCED MATERIALS RESEARCH Proceedings UTM FIRST AUTHOR	2015
Non-Fickian Moisture Uptake Characterisation Of Epoxy-Based Moulding Compounds With Thickness Effect 36TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCE (IEMT 2014) Conference Paper CORRESPONDING AUTHOR	2014
R-Curve Modelling Of Mode I Delamination In Multidirectional Carbon/Epoxy Composite Laminates APPLIED MECHANICS AND MATERIALS Publication In Scopus CORRESPONDING AUTHOR	2014
Moisture Absorption Effects On The Resistance To Interlaminar Fracture Of Woven Glass/Epoxy Composite Laminates DAMAGE AND FRACTURE OF COMPOSITE MATERIALS AND STRUCTURES Book Chapter UTM FIRST AUTHOR	2012
Application Of Cohesive-Zone Models To Delamination Behaviour Of Composite Material WORLD JOURNAL OF ENGINEERING Journal Article Non Citation-Indexed UTM FIRST AUTHOR	2012
Effect Of Fibre Orientation On The Scratch Characteristics Of E-Glass Fibre-Reinforced Polyester Composite RECENT PATENTS ON MATERIALS SCIENCE Publication In Scopus UTM FIRST AUTHOR	2011
Tribological Effects Of Polymer Surface Modification Through Plastic Deformation BULLETIN OF MATERIALS SCIENCE Publication In Web Of Science UTM FIRST AUTHOR	2011
Influence Of Ball Burnishing On Surface Quality And Tribological Characteristics Of Polymers Under Dry Sliding Conditions TRIBOLOGY INTERNATIONAL Publication In Web Of Science UTM FIRST AUTHOR	2011
Tensile Behaviour Of Anti-Symmetric Cfrp Composite PROCEDIA ENGINEERING Publication In Scopus CORRESPONDING AUTHOR	2011
An Experimental Study On The Scratch Characteristics Of Bamboo Fibre-Reinforced Epoxy Composite ADVANCED COMPOSITES LETTERS Publication In Scopus UTM FIRST AUTHOR	2010
Three-Body Abrasion On Wear And Frictional Performance Of Treated Betelnut Fibre Reinforced Epoxy (T-Bfre) Composite MATERIALS & DESIGN Publication In Web Of Science UTM FIRST AUTHOR	2010
The Effects Of Alkali Treatment On The Interfacial Adhesion Of Bamboo Fibres PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L, JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS Publication In Web Of Science CORRESPONDING AUTHOR	2010
Fracture Characterisation Of Short Bamboo Fibre Reinforced Polyester Composites Materials & Design Publication In Web Of Science CORRESPONDING AUTHOR	2010
Impact Behavior Of Short And Continuous Fiber-Reinforced Polyester Composites JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Publication In Web Of Science CORRESPONDING AUTHOR	2010

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name	Grant Register No.	IP Level	IP Category
INNOVATIVE MATERIALS FOR RESILIENT CONTACT SYSTEMS	LY2018006417	NATIONAL	COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
SITI KHALIJAH BINTI JAMAL MECHANICAL PROPERTIES STUDY OF HYBRID WOVEN KENAF/RECYCLATE-GFRP REINFORCED POLYESTER COMPOSITES PHD GRADUATED CO-SUPERVISOR 2018
MUHAMMAD A'IMULLAH BIN ABDULLAH DELAMINATION DAMAGE OF CARBON FIBER-REINFORCED POLYMER COMPOSITE LAMINATES UNDER CYCLIC SHEAR-INDUCED LOADING CONDITIONS PHD GRADUATED CO-SUPERVISOR 2018
MAHZAN BIN JOHAR MECHANICS OF ADHESIVELY BONDED JOINTS WITH DEGRADING PERFORMANCE PHD GRADUATED CO-SUPERVISOR 2019
CHOW ZHEN PEI TEMPERATURE EFFECT ON THE LOW-VELOCITY IMPACT CHARACTERISTICS OF GLASS LAMINATED ALUMINIUM REINFORCED EPOXY PANELS PHD GRADUATED CO-SUPERVISOR 2022
SAFDAR ALI KHAN INTERLAMINAR FATIGUE DAMAGE MODEL OF CARBON FIBER-REINFORCED POLYMER COMPOSITE LAMINATES PHD GRADUATED SUPERVISOR 2022
MUHAMMAD IRFAN NAUFAL BIN MOHD ZAKI FRACTURE TOUGHNESS BEHAVIORS OF RECYCLED CARBON IN HYBRID COMPOSITES UNDER MIXED-MODE LOADINGS &NBSP; PHD ON GOING CO-SUPERVISOR
CHOW ZHEN PEI TEMPERATURE EFFECT ON THE IMPACT CHARACTERISTICS OF FIBER METAL LAMINATE PANELS&NBSP; &NBSP; MASTER ON GOING CO-SUPERVISOR
MUHAMAD NORKHIZAN BIN ABDULLAH MOISTURE ABSORPTION CHARACTERISTICS AND EFFECTS ON MECHANICAL BEHAVIOUR OF HYBRIDISED PINEAPPLE LEAF/GLASS FIBRE REINFORCED EPOXY COMPOSITES MASTER GRADUATED CO-SUPERVISOR 2017
MOHD HAFIDZUL BIN SALLEH MASTER GRADUATED SUPERVISOR 2017
THAMILARASU A/L S.RAJENDRAN MASTER GRADUATED SUPERVISOR 2017
SHARIMAN BIN SANAWI MASTER GRADUATED SUPERVISOR 2017
TAHIR BIN MOHAMMAD MASTER GRADUATED SUPERVISOR 2017
LEE KOK WEI MASTER GRADUATED SUPERVISOR 2018
OOI SOO HAN MASTER GRADUATED SUPERVISOR 2018
TAN WEE ERN MASTER GRADUATED SUPERVISOR 2018
MASTURA NABILAH BINTI MOHD FUAAD MASTER GRADUATED SUPERVISOR 2019
SUFIYAN BIN KASMAN BOKTI MASTER GRADUATED SUPERVISOR 2019
MOHAMMAD HASIF BIN MOHD JAILANI MASTER GRADUATED SUPERVISOR 2019
MUHAMMAD 'IZZUDDIN BIN MOHD SOFI ENERGY ABSORPTION CAPABILITY OF MULTI-CELL THIN-WALLED TUBE UNDER LATERAL LOADING MASTER GRADUATED CO-SUPERVISOR 2019
MOHD FADZIL BIN MOHD TAHIR MASTER GRADUATED SUPERVISOR 2019
MOHAMAD AIRUL AMIN BIN MD DANI NUMERICAL ANALYSIS ON BONDING STRESS OF CARBON FIBRE REINFORCED EPOXY/STEEL MASTER GRADUATED CO-SUPERVISOR 2021
KEE JIAN FA MASTER GRADUATED SUPERVISOR 2021