UTM Scholar : PROFESSOR DR. AZHAR BIN ABDUL AZIZ

GRANT(PI & MEMBERS)

40

PUBLICATIONS

107

INDEXED PUBLICATION

44

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

NATIONAL GRANTS

UNIVERSITY FUND

TOTAL

Publications

INDEXED PUBLICATION

NON-INDEXED PUBLICATION

OTHERS PUBLICATION

TOTAL

Supervisions

MASTER

PHD

TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name	Year
Newly Effective Resonators of a Gasoline Engine for Low Intake Noise Emissions MINISTRY OF EDUCATION Fundamental Research Grant Scheme	2016
DENSIFIED TORREFACTION OF VARIOUS PALM BIOMASS RESIDUES PRODUCED DURING PALM OIL PRODUCTION PROCESS RUG OF UTM Tier 1	2016
Development of On-line Particle Characterisation Device based on Image Analysis Technique RUG OF UTM Tier 1	2016
GASOLINE DIRECT-INJECTION KIT FOR SMALL SPARK-IGNITION ENGINE APPLICATIONS RUG OF UTM Professional Development Research University	2016
Nano-particles of TiO2 as an additive in the compressor lubricant of automotive air conditioner RUG OF UTM Professional Development Research University	2015
Development of Remotely Operated Underwater Vehicle for Observation and Scientific Applications MINISTRY OF EDUCATION Prototype Development Research Grant Scheme	2015
GASOLINE DIRECT-INJECTION KIT FOR SMALL SPARK-IGNITION ENGINE APPLICATIONS MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	2014
Intelligent and Energy Efficient Air Conditioning System for Automobiles MINISTRY OF EDUCATION Knowledge Transfer Program - RMC	2014
DEVELOPMENT OF A PORTABLE SMALL SCALE BIOFUELS PLANT FOR INTERNAL COMBUSTION ENGINE RUG OF UTM Tier 1	2014
Experimental Investigation of Spark Ignition Engine Fuelled with Low Carbon Fuels RUG OF UTM Tier 1	2014
Formulation of Alcohol-Derived Fuels from Palm Residues for Use in Spark-ignition Engines RUG OF UTM Tier 1	2014
DESIGN OF REMOTELY OPERATED UNDERWATER VEHICLE RUG OF UTM Flagship	2013
HOMOGENOUS CHARGE COMPRESSION IGNITION (HCCI) ENGINE CHARACTERISTIC USING ETHANOL AS FUEL NEW ACADEMIC STAFF Potential Academic Staff	2012
Cabin Comfort Control using Evaporative Cooling Technique RUG OF UTM Tier 2	2012
PERFORMANCE CHARACTERIZATION OF GREEN DIESEL RUG OF UTM Flagship	2011
Investigation into the Fumigation of Ethanol in a Single-cylinder Homogeneously-charge Compression Ignition (HCCI) Engine RUG OF UTM Tier 2	2011
Characterization of Diesel Engine with different Compression Ratio RUG OF UTM Tier 2	2011
Kajian Hala Tuju Bidang Automotif MINISTRY OF EDUCATION Contract	2010
Penyertaan UTM Dalam Projek Agropolitan Pulau Banggi Sabah Melalui Rekabentuk dan Pembinaan Satu Sistem Tenaga Angin di UTM UNIVERSITI TEKNOLOGI MALAYSIA Institutional Research Grant Scheme	2008
Projek Diesel Minyak Sawit di bawah Intensification of Research in Priority Area (MPOB) Non Goverment Agency	2001
Renewable Energy Powered Organic Ranking Cycle Short Term	2000
Cadangan Bagi Membangunkan Sistem Pengangkutan Ringan Halaju Rendah Jenis ARTICULATING Bagi Kegunaan Membawa Pelawat di UTM Short Term	2000
Environmentally Friendly Refigeneration with Thermoacoustics MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	1999
Thermoacoustic Refrigeration System from Waste Heat MINISTRY OF EDUCATION Short Term	1998
The Performance Analysis of Turbocharger Effect on Engine on Local Cars MINISTRY OF EDUCATION Short Term	1998
The Performance Analysis of Turbocharger Effect on Engine on Local Cars MINISTRY OF EDUCATION Short Term	1998
Design and Development of New Two-Stroke (80 to 125 cc), Stratified-charge, Lean-burn Gasoline Engines MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	1998
Design and Development of Auxilliary Components for New Two Stroke, Stratified-Charge, Lean-Burn Gasoline Engines MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	1998
Development of a Parallel Hybrid Powerplant for Automotive Applications MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	1996
Agricultural Waste-Heat Boiler for Stream Raising Short Term	1996
Development of an Indigeneous Incinerator System MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund	1995
Engine Performance Test Using CNG As Fuel In The 4 Stroke Engine Short Term	1994
Producing Absorb Vapor Cooling System Using Discarded Heat from Diesel Engine Electricity Generator Short Term	1991
Olein - Potential Hydraulic Fluid for the Future Short Term	1990
Rekabentuk dan Pembinaan Kereta Solar Asas Short Term	1990
Efficient and Controlled Pyrolysis of Biomass. Contract	1987
The study on the use of the palm oil diesel to diesel engine Short Term	1987
Data gathering system for engine testing. Short Term	1985
Easy Making Engine Through Reverse Engineering. Short Term	1985
Biomass gassination. Short Term	1983

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name	Year
A Study On Gasoline Direct Injection (Gdi) Pump System Performance Using Model-Based Simulation JOURNAL OF THE SOCIETY OF AUTOMOTIVE ENGINEERS MALAYSIA Journal Article Non Citation-Indexed CO-AUTHOR	2018
The Effect Of Diethyl Ether Addition On Performance And Emission Of A Reactivity Controlled Compression Ignition Engine Fueled With Ethanol And Diesel ENERGY CONVERSION AND MANAGEMENT Publication In Web Of Science CO-AUTHOR	2018
Performance And Emissions Of A Reactivity Controlled Light-Duty Diesel Engine Fueled With N-Butanol-Diesel And Gasoline APPLIED THERMAL ENGINEERING Publication In Web Of Science CO-AUTHOR	2018
Modeling Of Pressure Line Behavior Of A Common Rail Diesel Engine Due To Injection And Fuel Variation JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR	2017
Steady Flow And Dynamic Analyses Comparison Of An Air Intake Breathing Capacity MATEC WEB OF CONFERENCES Publication In Web Of Science CO-AUTHOR	2017
Performance Characteristic Study On Air To Water Intercooler APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR	2016
Performance Of Automotive Air-Conditioning System By Using Ejector As An Expansion Device APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR	2016
Prediction Lubricant Trajectory Inastepped-Piston, Two-Stroke Engine 1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING (MCME 2016). Proceedings CORRESPONDING AUTHOR	2016
Brake Dynamometer Design For Small Engine 1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016 Proceedings CO-AUTHOR	2016
Proton Exchange Membrane Fuel Cell Technology For Transport Applications: Prospects And Challenges 1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING (MCME 2016) Proceedings UTM FIRST AUTHOR	2016
Investigation Of Performance And Fuel Economy For Cylinder Deactivation Engine At Part Load Operation APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR	2016
The Effect Of Different Liquid Coolants On Vehicle Cooling System Characteristic 1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016 Proceedings CO-AUTHOR	2016
A Review On Butanol And Ethanol Fuels In Internal Combustion Engines APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR	2016
The Effect Of Ambient Temperature On The Performance Of Automotive Air-Conditioning System APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR	2016
Performance Analysis For Vehicle Air Conditioning System With Direct Current Compressor In Non-Electric Vehicle Using Fuzzy Logic Controller APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR	2016
EVALUATION ON THE PERFORMANCE OF HYDROCARBON REFRIGERANT (AMDACS-50) AS WORKING FLUID IN A DOMESTIC AIR CONDITIONING SYSTEM FOR AMD GRUPPE BERHAD Clasified/Technical Report CO-AUTHOR	2016
DEVELOPMENT OF AN AUTOMATED PUMP TEST RIG (RATED 2 INCH SIZE PIPE) FOR KEWPUMP (M) SDN BHD Clasified/Technical Report CORRESPONDING AUTHOR	2016
NFE INTAKE ACOUSTICS SIMULATION WORK FOR PERUSAHAAN OTOMOBIL NASIONAL SDN. BHD. Clasified/Technical Report CO-AUTHOR	2016
The Effect Of Ethanol Combustion On Hcci Engine Performance And Emissions THE JOURNAL OF ENGINE RESEARCH Journal Article Non Citation-Indexed UTM FIRST AUTHOR	2016
Identification Of Ringing Operation For Low Temperature Combustion Engines APPLIED ENERGY Publication In Web Of Science UTM FIRST AUTHOR	2016
Combustion And Selected Emission Constituents Of A Compression-Ignition Engine Using Fuel Blends Of Palm Oil Methyl Ester And Diesel GREEN TECHNOLOGY, ENERGY EFFICIENCY AND SUSTAINABILITY Book Chapter UTM FIRST AUTHOR	2016
Application And Effect Of Controlled Auto-Ignition (Cai) Combustion In An Air-Cooled Two Stroke Spark-Ignition Engine GREEN TECHNOLOGY, ENERGY EFFICIENCY AND SUSTAINABILITY Book Chapter UTM FIRST AUTHOR	2016
Single-Cylinder 125 Cc Stepped-Piston Engine For Mobility And Portable Power Generation Applications International Journal of Technology Publication In Scopus CORRESPONDING AUTHOR	2016
Flow Analysis Of Piston Head Geometry For Direct Injection Spark Ignition Engine JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2016
Indoor Temperature Control And Energy Saving Potential Of Split- Type Air Conditioning System Using Fuzzy Logic Controller JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2016
Comparative Performance Between R134a And R152a In An Air Conditioning System Of A Passenger Car JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2016
Energy Efficiency Of A Variable Speed Of The Centralized Air Conditioning System Using Pid Controller JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2016
Energy Analysis Of Split Air Conditioning System Using Variable Speed Drive APPLIED MECHANICS AND MATERIALS Proceedings CO-AUTHOR	2016
Comparison Of Intake Breathing Capacity By Steady Flow And Dynamics Analyses 2ND INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN ENERGY VEHICLE Conference Paper CO-AUTHOR	2016
Direct Fermentation Of Oil Palm Frond Liquid Extract For Solvent Production Using Clostridium Acetobutylicum (Atcc4259) 2ND INTERNATIONAL CONFERENCE ON SCIENCE, ENGINEERING AND THE SOCIAL SCIENCES (ICSESS 2016) Conference Paper UTM FIRST AUTHOR	2016
Numerical Investigation On Ejector As An Expansion Device Using R290 In Residential Air Conditioner For Various Cooling Capacity ARPN Journal of Engineering and Applied Sciences Publication In Scopus CO-AUTHOR	2016
The Effect Of Internal And External Egr On Cyclic Variability And Emission Of A Spark Ignition Two-Stroke Gasoline Engine 2ND INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN ENERGY VEHICLE (AIGEV 2016) Conference Paper UTM FIRST AUTHOR	2016
Effect Of Ph And Inoculum Size Concentration In Fermentation Of Oil Palm Liquid Extract To Solvents Using Clostridium Acetobutylicum (Atcc4259) INTERNATIONAL CONFERENCE ON SCIENCE, MANAGEMENT AND SOCIAL SCIENCE (ICSEMSS) 2016 Conference Paper UTM FIRST AUTHOR	2016
Biobutanol Production From The Fermentation Of Oil Palm Frond Extract Using Clostridium Acetobutylicum (Atcc4259) THE 8TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2015 (IMAT 2015) (JAKARTA, INDONESIA) Conference Paper UTM FIRST AUTHOR	2015
The Effect Of Decontaminants On Vehicle Cooling System THE 8TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2015 (IMAT 2015) Conference Paper CO-AUTHOR	2015
The Effect Of Bio-Based Additives On Engine Performance And Emissions Of Petrol And Diesel Engine THE 8TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2015 (IMAT 2015) Conference Paper CO-AUTHOR	2015
Investigation Into The Selection Of An Appropriate Piston Head Geometry For A Spark Ignition Engine Equipped Direct-Fuel Injector THE 8TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2015 (IMAT 2015) Conference Paper CO-AUTHOR	2015
Single-Cylinder 125 Cc Stepped Piston Engine For Mobility And Portable Power Generation Applications THE 8TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2015 (IMAT 2015) Conference Paper CORRESPONDING AUTHOR	2015
Impact Of The Electric Compressor For Automotive Air Conditioning System On Fuel Consumption And Performance Analysis THE 3RD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER) 2015 Proceedings CO-AUTHOR	2015
Performance Comparison Of Automotive Air Conditioner Using Various Refrigerants 2ND INTERNATIONAL MATERIALS, INDUSTRIAL & MANUFACTURING ENGINEERING CONFERENCE (MIMEC2015) Proceedings CO-AUTHOR	2015
In-Cabin Vehicle Initial Temperature Control: A Review PROCEEDINGS OF THE 4TH WORLD VIRTUAL CONFERENCE ON APPLIED SCIENCES AND ENGINEERING APPLICATIONS Proceedings CO-AUTHOR	2015
Performance Analysis Of Passenger Vehicle Air Conditioning System Fitted With Variable Speed Electric Compressor INTERNATIONAL CONFERENCE ON KNOWLEDGE TRANSFER (ICKT2015) Proceedings CO-AUTHOR	2015
Performance And Energy Saving Analysis Of A Refrigerator Using Hydrocarbon Mixture (Hc-R134a) As Working Fluid THE 3RD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER) 2015 Proceedings CO-AUTHOR	2015
In-Cabin Temperature Control And Multi-Circuit Bus Air-Conditioning Systems SEOUL INTERNATIONAL CONFERENCE ON APPLIED SCIENCE AND ENGINEERING Proceedings CO-AUTHOR	2015
Direct Current Compressor For Vehicle Air Conditioning System In Non Electric Vehicles SEOUL INTERNATIONAL CONFERENCE ON APPLIED SCIENCE AND ENGINEERING Proceedings CO-AUTHOR	2015
The Water-Cooled Engine System Performance JURNAL TEKNOS-2K Journal Article Non Citation-Indexed CO-AUTHOR	2015
Evaluation Of Garden Tools Set And Its Performance Characteristics JURNAL TEKNOS-2K Journal Article Non Citation-Indexed UTM FIRST AUTHOR	2015
In-Cabin Vehicle Initial Temperature Control: A Review JOURNAL OF ADVANCED REVIEW ON SCIENTIFIC RESEARCH Journal Article Non Citation-Indexed CO-AUTHOR	2015
Intake Port Flow Study On Cylinder Head Using Flowbench JOURNAL OF TRANSPORT SYSTEM ENGINEERING Journal Article Non Citation-Indexed CO-AUTHOR	2015
Performance Prediction Of Hcci Engines With Oxygenated Fuels Using Artificial Neural Networks APPLIED ENERGY Publication In Web Of Science UTM FIRST AUTHOR	2015
Empirical Correlations For Sizing Adiabatic Capillary Tubes Using Conventional Refrigerants And Their Alternatives HEAT TRANSFER RESEARCH Publication In Web Of Science UTM FIRST AUTHOR	2015
Performance Of Automotive Air Conditioning System Using Hydrocarbon ENERGY PERFORMANCE & EFFICIENCY IN AUTOMOTIVE TECHNOLOGY Book Chapter UTM FIRST AUTHOR	2015
Pre-Cooled Of Engine Air Intake Temperature On Its Performance And Emissions ENERGY PERFORMANCE & EFFICIENCY IN AUTOMOTIVE TECHNOLOGY Book Chapter UTM FIRST AUTHOR	2015
Potential Of Oil Palm Frond Liquid Extract And Fiber As Feedstock For Bio-Butanol Production JURNAL TEKNOLOGI Publication In Scopus UTM FIRST AUTHOR	2015
Influence Of Hot Burned Gas Utilization On The Exhaust Emission Characteristics Of A Controlled Auto-Ignition Two-Stroke Cycle Engine INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING Publication In Scopus UTM FIRST AUTHOR	2015
Potential Of A Variable Speed Compressor In Achieving Efficient And Green Train Air-Conditioning System ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES Publication In Scopus CO-AUTHOR	2015
Indoor Temperature Control And Energy Saving Potential Of An Air Conditioning System Using Pd Controller JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2015
Performance Of A Variable Speed Of The Split Unit Air Conditioning System Using Fuzzy Logic Controller LECTURE NOTES IN ENGINEERING AND COMPUTER SCIENCE Publication In Scopus CO-AUTHOR	2015
Comparison Of Air To Air And Air To Water Intercoolers In The Cooling Process Of A Turbocharger Engine JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2015
Pi Control Application For Building Air Conditioning System JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR	2015
Ride Comfort Performance Evaluations On Electric Vehicle Conversion Via Simulations ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES Publication In Scopus CO-AUTHOR	2015
Decontamination And Treatment Process For Efficiency Of Hvac Building THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Modelling And Validation Of Vehicle Ride Comfort Model APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR	2014
The Potential Of A Variable Speed Compressor In Achieving Efficient And Green Train Air-Conditioning System INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN ENERGY VEHICLE (AIGEV 2014) Conference Paper CO-AUTHOR	2014
Performance Analysis For Vehicle Air Conditioning System With Direct Current Compressor In Non-Electric Vehicle Using Fuzzy Logic Controller THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
The Effects Of Lubrication Oil Properties On The Engine Performance Characteristics 1ST INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN ENERGY VEHICLE 2014 Conference Paper UTM FIRST AUTHOR	2014
Water Pump Characteristic For Engine Cooling System 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Influence Of Hot Burned Gas Utilization On The Exhaust Emission Characteristics Of A Controlled Auto-Ignition Two-Stroke Cycle Engine 1ST INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN ENERGY VEHICLE 2014 Conference Paper CORRESPONDING AUTHOR	2014
Ride Comfort Performance Evaluations On Electric Vehicle (Ev) Conversion Via Simulation Analysis INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN ENERGY VEHICLE Conference Paper CO-AUTHOR	2014
A Review On Butanol And Ethanol Fuels In Internal Combustion Engines 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Radiator Characteristics In Engine Cooling System 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Performance Of Automotive Air-Conditioning System By Using Ejector As An Expansion Device THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Simulation Validation Of Hot Burned Gas Influences On The Exhaust Emission Characteristics Of A Two-Stroke Cycle Engine 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper UTM FIRST AUTHOR	2014
Investigation Of Performance And Fuel Economy For Cylinder Deactivation Engine At Part Load Operation 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Test Rig Design For Automotive Refrigeration System 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Performance Characteristic Study On Air To Water Intercooler THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Energy Analysis Of Split Air Conditioning System Using Variable Speed Drive THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
The Effect Of Ambient Temperature On The Performance Of Automotive Air-Conditioning System THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Intelligent And Energy Efficient Air Conditioning System For Automobiles PERSIDANGAN KEBANGSAAN KEDUA PROGRAM PEMINDAHAN ILMU (KTP02) Conference Paper CO-AUTHOR	2014
Energy Savings Potential By Variable Speed Control Of Compressor For Air-Conditioning Systems Using Pid Controller THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS (IMAT 2014) Conference Paper CO-AUTHOR	2014
Taguchi Method For Development Of Mass Flow Rate Correlation Using Hydrocarbon Refrigerant Mixture In Capillary Tube JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES Publication In Scopus CO-AUTHOR	2014
A Converted Two-Stroke Cycle Engine For Compression Ignition Combustion APPLIED MECHANICS AND MATERIALS Publication In Scopus UTM FIRST AUTHOR	2014
Investigation Of Cylinder Deactivation (Cda) Strategies On Part Load Conditions SAE TECHNICAL PAPERS Publication In Scopus CO-AUTHOR	2014
Active Suspension System To Improve Ride Comfort Performance Of Electric Vehicle (Ev) Conversion APPLIED MECHANICS AND MATERIALS Publication In Scopus UTM FIRST AUTHOR	2014
Performance Study Of Electric Compressor In Non-Electric Vehicle APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR	2014
Energy Analysis And Compressor Performance Of Refrigerator System Using Programmable Logic Control (Plc) Applied Mechanics and Materials Publication In Scopus CO-AUTHOR	2014
Performance Analysis Of Hydrocarbon Mixture To Replace R134a In An Automotive Air Conditioning System Applied Mechanics and Materials Publication In Scopus CO-AUTHOR	2014
Energy Savings On Automotive Air Conditioner Using Liquid-Suction Heat Exchanger Subcooler Applied Mechanics and Materials Publication In Scopus CO-AUTHOR	2014
Empirical Correlations For Sizing Adiabatic Capillary Tube Using Lpg As Refrigerant In Split-Type Air-Conditioner Applied Mechanics and Materials Publication In Scopus UTM FIRST AUTHOR	2014
Driving Efficiency Through Hydrocarbon For Green Car Air Conditioning Applied Mechanics and Materials Publication In Scopus CO-AUTHOR	2014
Experimental Study On The Performance Of In-Cabin Ventilation System Applied Mechanics and Materials Publication In Scopus CO-AUTHOR	2014
Experimental Investigation Of The Influence Of Internal And External Egr On The Combustion Characteristics Of A Controlled Auto-Ignition Two-Stroke Cycle Engine APPLIED ENERGY Publication In Web Of Science UTM FIRST AUTHOR	2014
Grey-Box Modeling Of Hcci Engines APPLIED THERMAL ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR	2014
An Experimental Study On The Influence Of Egr Rate And Fuel Octane Number On The Combustion Characteristics Of A Cai Two-Stroke Cycle Engine APPLIED THERMAL ENGINEERING Publication In Web Of Science UTM FIRST AUTHOR	2014
Controlled Auto-Ignition Combustion In A Two-Stroke Cycle Engine Using Hot Burned Gases Applied Mechanics and Materials Publication In Scopus UTM FIRST AUTHOR	2013
Investigation Of Various Mixtures Of Hc290/Hc600 Refrigerants In Adiabatic Capillary Tube Used In Split-Type Air-Conditioner APPLIED MECHANICS AND MATERIALS Publication In Scopus UTM FIRST AUTHOR	2013
Design Of A Four-Stroke Homogeneous Charge Compression Ignition Engine APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR	2013
Experimental Study On The Replacement Of Hfc-R134a By Hydrocarbons In Automotive Air Conditioning System APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR	2013
Understanding And Detecting Misfire In An Hcci Engine Fuelled With Ethanol APPLIED ENERGY Publication In Scopus UTM FIRST AUTHOR	2013
Analysis And Modeling Of Exhaust Gas Temperature In An Ethanol Fuelled Hcci Engine JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Publication In Web Of Science UTM FIRST AUTHOR	2013
The Effect Of Fuel Additives On Gasoline Heating Value And Spark Ignition Engine Performance: Case Study APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR	2013
Retrofitting R-22 Split Type Air Conditioning With Hydrocarbon (Hcr-22) Refrigerant APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR	2013
Empirical Correlation Of Refrigerant R-22 Mass Flow Rate Through Adiabatic Capillary Tube Using Statistical Experimental Design JURNAL TEKNOS-2K Journal Article Non Citation-Indexed UTM FIRST AUTHOR	2011
Evaluation On The Potential Of Ethylene As Fuel For Internal Combustion Engines Advances in Thermo-Fluids Book Chapter INDIVIDUAL AUTHOR	2008
Performance And Emission Evaluations Of A Prototype Stepped-Piston Engine Using Carburetor And Direct Fuel-Injection Systems Research On Vehicle Technologies Book Chapter INDIVIDUAL AUTHOR	2008
Students' Perceptions On The Use Of English As The Medium Of Instruction For Mechanical Engineering Programs 2nd Regional Conference on Engineering Education Conference Paper INDIVIDUAL AUTHOR	2007
Utm-International Networking In Open Learning Unit Development 2nd Regional Conference on Engineering Education Conference Paper INDIVIDUAL AUTHOR	2007

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name	Grant Register No.	IP Level	IP Category
EJECTOR AS AN EXPANSION DEVICE ON THE AIR CONDITIONER		NATIONAL	PATENT
DC COMPRESSOR FOR CAR AIR CONDITIONING SYSTEM		NATIONAL	PATENT
LOW EMISSION SPARK IGNITION TWO-STROKE CYCYLE ENGINE WITH EXHAUST GAS RECIRCULATION (EGR)		NATIONAL	PATENT
A HYDRAULIC RAM MOTOR	MY-181669-A	NATIONAL	PATENT
TYRE PRE-FAILURE DIAGNOSTIC SYSTEM (TPDS)		NATIONAL	PATENT
FUEL INJECTOR		NATIONAL	PATENT
EXPANSION DEVICE FOR AIR CONDITIONING UNIT	MY 16-E0363-0101 Class 23-04	NATIONAL	INDUSTRIAL DESIGN
UTM INTRAVENOUS INFUSION DRIP MONITORING SYSTEM (IVDMS)		NATIONAL	INDUSTRIAL DESIGN

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
KHOO TENG CHEOK DESIGN AND DEVELOPMENT OF A ROBUST TYRE PREFAILURE DIAGNOSTIC SYSTEM PHD GRADUATED SUPERVISOR 2010
ZULKARNAIN BIN ABDUL LATIFF STRATIFIED-CHARGED TWO-STROKE STEPPED-PISTON ENGINE PHD GRADUATED SUPERVISOR 2011
SULAIMON SHODIYA LIQUIFIED PETROLEUM GAS AS REFRIGERANT IN ADIABATIC CAPILLARY TUBE FOR SPLIT-TYPE AIR-CONDITIONER PHD GRADUATED SUPERVISOR 2013
BAHRAM BAHRI MODELING AND EXPERIMENTAL ANALYSIS OF EXHAUST GAS TEMPERATURE AND MISFIRE IN A CONVERTED-DIESEL HCCI ENGINE FUELLED WITH ETHANOL PHD GRADUATED SUPERVISOR 2013
AMIN MAHMOUDZADEH ANDWARI COMBUSTION CHARACTERISTICS OF A CONTROLLED AUTO-IGNITION TWO-STROKE ENGINE PHD GRADUATED SUPERVISOR 2014
AHMED ELBADAWI MOHAMED AWAD OMER THEORETICAL AND EXPERIMENTAL ANALYSIS OF A HYDRAULIC RAM MOTOR PHD GRADUATED SUPERVISOR 2014
ABUBAKAR SADIQ ALIYU BIO-BUTANOL PRODUCTION FROM FERMENTATION OF OIL PALM FROND LIQUID EXTRACT AS POTENTIAL FUEL FOR SPARK IGNITION ENGINES PHD GRADUATED SUPERVISOR 2017
GAN LEONG MING THE DEVELOPMENT OF A NEW BLOWER ASSISTED SCAVENGING SYSTEM FOR TWO STROKE PETROL ENGINE MASTER GRADUATED CO-SUPERVISOR 2005
NG TEE NENG DESIGN AND OPTIMIZATION OF THE SCAVENGING SYSTEM OF A MULTI-CYLINDER TWO-STROKE SCOTCH-YOKE ENGINE MASTER GRADUATED SUPERVISOR 2006
FONG KOK WENG TRIBOLOGICAL PROPERTIES OF CHROMIUM OXIDE AND PARTIALLY STABILIZED ZIRCONIA COATINGS FOR RECIPROCATING MECHANISM MASTER GRADUATED SUPERVISOR 2006
MAS FAWZI BIN MOHD ALI REVERSE-FLOW INCLINE-SPRAY DIRECT FUEL INJECTION FOR TWO-STROKE GASOLINE ENGINE APPLICATIONS MASTER GRADUATED SUPERVISOR 2006
ERNIE BT MAT TOKIT DESIGN OPTIMIZATION OF A FIXED BED BIOMASS GASIFIER OF A TWO STAGE INCINERATION MASTER GRADUATED SUPERVISOR 2006
MOHD FARID BIN MUHAMAD SAID MASTER ON GOING SUPERVISOR
HAZIMI BIN ISMAIL MASTER GRADUATED SUPERVISOR 2013
BAHRAM TAJ BAKHSH MASTER GRADUATED SUPERVISOR 2013
AFIQ AIMAN BIN DAHLAN SEMI-ACTIVE AIR INTAKE RESONATOR CONTROL OF NATURAL ASPIRATED GASOLINE ENGINE FOR LOW NOISE EMISSION MASTER GRADUATED CO-SUPERVISOR 2016
MOHAMMAD ARQAM MASTER GRADUATED SUPERVISOR 2016
FAWAD RAHIM MALIK MASTER GRADUATED SUPERVISOR 2016