GRANT(PI & MEMBERS)
67
PUBLICATIONS
130
INDEXED PUBLICATION
77
TOTAL STUDENTS
H-INDEXED (SCOPUS)
CITATIONS (SCOPUS)
Grant (PI)
INDUSTRY GRANTS
6
INTERNATIONAL GRANTS
4
NATIONAL GRANTS
12
UNIVERSITY FUND
10
TOTAL
Publications
INDEXED PUBLICATION
77
NON-INDEXED PUBLICATION
8
OTHERS PUBLICATION
45
TOTAL
Supervisions
MASTER
42
PHD
27
TOTAL
Legend : SPONSOR TYPE OF GRANT
| Grant Name | Year |
|---|---|
| Investigation of Insertion Mechanics in Rotating Microneedles for Enhanced Transdermal Precision, Reduced Insertion Force, and Improved Mechanical Robustness RUG OF UTM GERAN DANA PENYELIDIK BERPOTENSI DANA DTD |
2024 |
| New Unified Hyperelastic Constitutive Model for Elastomeric Seal Materials RUG OF UTM UTM Encouragement Research |
2024 |
| Improving Structural and Mechanical Properties of Ti-Cr Alloys in Metal Arc Additive Manufacturing through Bimetallic Alloy Modification RUG OF UTM UTM Fundamental Research |
2023 |
| Stress Relaxation Properties of the Stranded Wire RUG OF UTM Industry-International Incentive Grant |
2021 |
| Hybrid Nanocomposite Coating of Reduced Graphene Oxide Molybdenum Disulphide in Bismaleimide Matrix for Resilient Contact Systems NIPPON SHEET GLASS International Grant |
2021 |
| New Damage-based Constitutive Equations for Strain Aging Phenomenon in Stranded Wire Ropes Fundamental Research Grant Scheme |
2020 |
| A New Traction-Separation Law for Fibre Bridging of Composite Laminates RUG OF UTM UTMShine |
2020 |
| MECHANICAL CHARACTERIZATION OF FRP COMPOSITE LAMINATES UNDER FATIGUE LOADING CONDITIONS Fundamental Research Grant Scheme |
2019 |
| UTM-TDR13:INNOVATIVE MATERIALS FOR RESILIENT CONTACT SYSTEMS RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 13.4(T1): AN INTELLIGENT BEARING CONDITION MONITORING SYSTEM FOR RESILIENT CONTACT SYSTEM RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 13.2 (T2): Metal Sponge-based material development for load bearing component of resilient contact system. RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 10: NEW GENERATION MATERIALS WITH ULTRAHIGH PERFORMANCE FOR HIGH IMPACT INDUSTRIES RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 13.3 (T2): HIGH PERFORMANCE PERFLUOROPOLYETHER-BASED GREASE LUBRICATION SYSTEM RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 10.2 (T1): Fretting Wear Damage Model for Fatigue Life Prediction of Steel Wire Ropes RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| UTM-TDR 13.1 (T1): HYBRID NANOCOMPOSITE COATING FOR RESILIENT CONTACT SYSTEMS RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
| ADVANCED TESTING OF COMPOSITE MATERIALS FOR AEROSPACE PARTS RUG OF UTM Professional Development Research University |
2018 |
| BEHAVIOUR OF INTERMETALLIC COMPOUNDS FORMED BETWEEN COPPER INTERCONNECTION FILLER, NICKEL UNDERLAYER, AND SILICON WAFER FOR THROUGH-SILICON VIA (TSV) APPLICATION RUG OF UTM Tier 1 |
2018 |
| A NEW THREE DIMENSIONAL FRACTURE CRITERION FOR MIXED-MODE DELAMINATION RUG OF UTM Tier 1 |
2018 |
| ADVANCED TESTING OF LAMINATED COMPOSITES FOR AEROSPACE PARTS AND ASEEMBLIES RUG OF UTM Professional Development Research University |
2017 |
| RELIABILITY AND SAFETY ENGINEERING AND TECHNOLOGY FOR LARGE MARITIME ENGINEERING SYSTEM EUROPEAN COMMISSION (EC) International Grant |
2017 |
| DAMAGE ASSESSMENT OF LAMINATED COMPOSITES BY DIGITAL IMAGE CORRELATION TECHNIQUE RUG OF UTM Matching Grant |
2016 |
| Fractal Fracture Mechanics Approach for Fatigue Life Prediction of Martensitic Steel Compressor Blades with Corrosion Pits RUG OF UTM Tier 1 |
2016 |
| SELF-CONTOURED COMPOSITE LAMINATES DESIGN USING POLAR METHOD RUG OF UTM Tier 1 |
2016 |
| investigation of eco-composite materials energy dissipation behavior Fundamental Research Grant Scheme |
2015 |
| ADVANCED TESTING OF LAMINATED COMPOSITES FOR AEROSPACE PARTS AND ASSEMBLIES AEROSPACE MALAYSIA INNOVATION CENTRE Contract |
2015 |
| Interfacial Reaction between Silicon wafer, Underlayers and Cu-Interconnection Filler of Through-Silicon Via (TSV) Fundamental Research Grant Scheme |
2014 |
| Fundamental Mechanisms of Fatigue Fracture for Nickel Free Titanium Alloys in Biomedical Applications Fundamental Research Grant Scheme |
2014 |
| Moisture absorption characteristics in fibre reinforced composite laminates Fundamental Research Grant Scheme |
2014 |
| METHODOLOGY FOR FATIGUE LIFE IMPROVEMENT OF STEEL WIRE ROPES -EXPERIMENTAL INVESTIGATION RUG OF UTM Matching Grant |
2014 |
| Evaluation of cohesive parameters on the delamination behaviour of laminated composites RUG OF UTM Potential Academic Staff |
2014 |
| Characterisation of Failure Mechanism of A Coated Surface Using Finite Element Simulation Method For A Novel Coating Selection Tool RUG OF UTM Matching Grant |
2014 |
| EFFECT OF ADHESIVE THICKNESS ON STRENGTH OF ADHESIVELY BONDED T-JOINT IN UREA GRANULATOR FLUIDIZATION BED RUG OF UTM Matching Grant |
2014 |
| DEPOSITION OF CU INTERCONNECTION MATERIALS FOR THROUGH-SILICON VIAS (TSV) APPLICATION BY ELECTROLESS PLATING RUG OF UTM Encouragement Grant |
2014 |
| New Field of Study in Fracture Mechanics based on Combination of Fractal Mathematics and Probabilistic Theory Fundamental Research Grant Scheme |
2013 |
| Fundamental study on impact characteristics and energy absorption capability of various fiber metal laminate (FML) thin-walled tubular structures Fundamental Research Grant Scheme |
2013 |
| METHODOLOGY FOR FATIGUE LIFE IMPROVEMENT OF STEEL CABLES AND WIRE ROPES KISWIRE SDN. BHD. Contract |
2013 |
| Damage Mechanics-Based Methodology for Reliability Assessment of Through-Silicon Via (TSV) Interconnects COLLABORATIVE RESEARCH IN ENGINEERING, SCIENCE & TECHNOLOGY CENTER (CREST) Non Goverment Agency |
2013 |
| Design and Construction of Efficient Body Structure For Electric Vehicle POST DOCTORAL FELLOWSHIP Professional Development Research University |
2013 |
| ELECTRODEPOSITION OF INTERMETALLIC NICKEL ALUMINIDE NANOPARTICLES SYNTHESIS USING CHEMICHAL REDUCTION APPROACH RUG OF UTM Tier 1 |
2012 |
| New Mechanisms for Moisture-Induced Oxidation-Creep of Austenitic Stainless Steel Foils at Elevated Temperatures Fundamental Research Grant Scheme |
2012 |
| NEW MECHANISM OF FATIGUE FOR MARTENSITIC STEEL TURBINE BLADES WITH CORROSION PITS Fundamental Research Grant Scheme |
2012 |
| Temperature and Rate Dependent Parameters for Damage-based Fatique Models of Pb-free Solders INTEL TECHNOLOGY SDN. BHD. Contract |
2011 |
| Design and Construction of Efficient Body Structure for Electrik Vehicle POST DOCTORAL FELLOWSHIP Professional Development Research University |
2011 |
| Design and construction of efficient body structure for electric vehicle RUG OF UTM Flagship |
2011 |
| Unified Methodology for Damage Assessment of Structural Composites RUG OF UTM Tier 1 |
2011 |
| Damage and Fracture Mechanics-Based Design Methodology MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Technofund |
2009 |
| Simulation of Low Cycle Fatigue Behavior of Pb-free Solder Interconnects Using Cohesive Zone Model¿ INTEL TECHNOLOGY SDN. BHD. Contract |
2009 |
| Microstructure-based Cohesive Damage Zone Model for Fatigue of Solder Interconnects INTEL TECHNOLOGY SDN. BHD. Contract |
2009 |
| Damage Mechanics-Based Fatigue Design Methodology for Structural Components LIBYAN PEOPLE'S BUREAU-KUALA LUMPUR International Grant |
2009 |
| Evalution of Fracture Mechanics Based Model for Pb-Fibre Solder Interconnects INTEL TECHNOLOGY SDN. BHD. Contract |
2007 |
| Performance Characterization Of Advanced Alloys For High-Temperature Recuperators Applications In Improved Efficiency Microturbines MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2006 |
| A New Technique For Predicting Damage In Advanced Interconnect Materials For Microelectronic Applications MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2006 |
| Predictive Methodology for Crack Initiation and Propagation in Interconnect Materials Contract |
2001 |
| Dynamic Modelling and Measurement of System/ Chassis Contract |
2001 |
| Low CTE Substrate to Improve Warpage ans Solder Joint Reliability INTEL TECHNOLOGY SDN. BHD. Contract |
1999 |
| Methodology For Assessment Of Plastic/Organic Package Failure Process Under Thermo-Mechanical Loading Conditions INTEL TECHNOLOGY SDN. BHD. Contract |
1999 |
| Studies Of Thermal Shock Stress On Packaging INTEL TECHNOLOGY SDN. BHD. Contract |
1999 |
| High-temperature Performance of Titanium Aluminides (Ti-Al alloys) for Aerospace and Automotive Applications MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1997 |
| High-temperature Performance of Titanium Aluminides (Ti-Al alloys) for Aerospace and Automotive Applications MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1997 |
| Development of Experimental Simulation Method for Thermal Dissipation in Electronic Components Short Term |
1996 |
| Development of Experimental Simulation Method for Thermal Dissipation in Electronic Components Short Term |
1996 |
| Fatigue Characterization Of Cast TiAi Intermatallic Alloys For Aircraft And Automative Engine Applications MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1996 |
| Development And Performance Evaluation Of SiC/A1 Metal Matrix Composites For Automotive Engine Applications MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
1995 |
| Effect Of Microstructure On Cyclic Strength Response Of SIC/AI Metal Matrix Composite. Short Term |
1994 |
| Fatigue Crack Initiation Am350 Steel Bellows Short Term |
1993 |
Legend : PUBLICATION CATEGORY TYPE OF AUTHORS
| Publication Name | Year |
|---|---|
|
Wear Performance Of Nanocomposite Coating Mos2-Rgo On Suj2 Bearing Steel Alloy
AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR |
2024 |
|
Water Absorption Effects On Mode I And Ii Delamination Of Carbon/Epoxy Composites
SOUTH EAST ASIA-JAPAN CONFERENCE ON COMPOSITE MATERIALS 2024 Conference Paper CO-AUTHOR |
2024 |
|
A Robust Probabilistic Fatigue Crack Growth Model Based On Walker’S Crack
Growth Rate Equation For Metallic Materials
PROBABILISTIC ENGINEERING MECHANICS Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR |
2023 |
|
Effect Of Substrate Roughness And Pvd Deposition Temperatures On Hardness And Wear Performance Of Alcrn-Coated Wc-Co
SURFACE AND COATINGS TECHNOLOGY Publication In Web Of Science CO-AUTHOR |
2022 |
|
Exploiting Fractal Features To Determine Fatigue Crack Growth Rates Of Metallic Materials
ENGINEERING FRACTURE MECHANICS Publication In Web Of Science CORRESPONDING AUTHOR |
2022 |
|
Extracting The True Stress Strain Cuver From Nanoindentation Test
MECHANICAL TESTING AND FINITE ELEMENT ANALYSIS Book Chapter CORRESPONDING AUTHOR |
2022 |
|
Fractal Analysis For Fatigue Crack Growth Rate Response
Of Engineering Structures With Complex Geometry
FRACTAL AND FRACTIONAL Publication In Web Of Science CORRESPONDING AUTHOR |
2022 |
|
Water–Cement Ratio On High‑Cycle Fatigue In The Theory Of Critical
Distances Of Plain Concrete
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY, TRANSACTIONS OF CIVIL ENGINEERING Publication In Web Of Science CO-AUTHOR |
2022 |
|
Linear-Elastic Stress Field Of Notched Concrete Beam: An Application Of Finite Element In Theory Of Critical Distances
3RD INTERNATIONAL SYMPOSIUM ON CIVIL AND ENVIRONMENTAL ENGINEERING (ISCEE 2020) 1ST-2ND DECEMBER 2020, BATU PAHAT,JOHOR, MALAYSIA Conference Paper CO-AUTHOR |
2021 |
|
Fractal Dimensions Of A Propagating Fatigue Crack In Metallic Materials
JOURNAL OF FAILURE ANALYSIS AND PREVENTION Publication In Web Of Science CORRESPONDING AUTHOR |
2021 |
|
An Extended Thickness-Dependent Moisture Absorption Model For Unidirectional Carbon/Epoxy Composites
POLYMERS Publication In Web Of Science CO-AUTHOR |
2021 |
|
Representative Cell Analysis For Damage-Based Failure Model Of Polymer Hexagonal Honeycomb Structure Under The Out-Of-Plane Loadings
POLYMERS Publication In Web Of Science CORRESPONDING AUTHOR |
2021 |
|
Moisture Absorption Effects On Mode Ii Delamination Of Carbon/Epoxy Composites
POLYMERS Publication In Web Of Science CO-AUTHOR |
2020 |
|
Stacking Sequence Effects On The Tensile Behaviour Of Quasi-Isotropic Composite
LIGHTWEIGHT MATERIALS FOR STRUCTURAL APPLICATIONS Publication In Web Of Science CO-AUTHOR |
2020 |
|
Effects Of Starter Defect On Energy Release Rate Of
Three-Point End-Notch Flexure Tested Unidirectional
Carbon Fiber Reinforced Polymer Composite
POLYMERS Publication In Web Of Science UTM FIRST AUTHOR |
2020 |
|
An Energy-Based Concept For Yielding Of Multidirectional Frp Composite Structures Using A Mesoscale Lamina Damage Model
POLYMERS Publication In Web Of Science CORRESPONDING AUTHOR |
2020 |
|
Effects Of Cell Aspect Ratio And Relative Density On Deformation Response And Failure Of Honeycomb Core Structure
MATERIALS RESEARCH EXPRESS Publication In Web Of Science CORRESPONDING AUTHOR |
2020 |
|
Stochastic Petri Nets Modeling For Reliability, Availability And Maintainability Study Of A Power Generation Plant
PROCEEDINGS OF THE 29TH EUROPEAN SAFETY AND RELIABILITY CONFERENCE, ESREL 2019 Publication In Scopus CO-AUTHOR |
2020 |
|
Effect Of Strain Rate And Moisture Content On Mechanical Properties Of Adhesively Bonded Joints
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Publication In Web Of Science CORRESPONDING AUTHOR |
2020 |
|
Effects Of Water-Cement Ratio And Notches To The Flexural Strength Of Concrete
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus CO-AUTHOR |
2020 |
|
Residual Properties Of The Drawn Steel Wires For Damage-Based
Fretting Fatigue Models Of The Wire Ropes
MATERIALS SCIENCE FORUM Publication In Scopus CORRESPONDING AUTHOR |
2020 |
|
Moisture Absorption Effects On The Mechanical Properties Of Carbon/Epoxy Composites
INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY Publication In Scopus CO-AUTHOR |
2020 |
|
Numerical Framework For Life Prediction Of Steel Wire Ropes Employing Damage-Based Failure Models
PROCEEDINGS OF THE 29TH EUROPEAN SAFETY AND RELIABILITY CONFERENCE Publication In Scopus CO-AUTHOR |
2020 |
|
Failure Investigation Of Welded 430 Stainless Steel Plates For Conveyor Belts
ENGINEERING FAILURE ANALYSIS Publication In Web Of Science CORRESPONDING AUTHOR |
2020 |
|
Deformation And Damage Mechanisms Of Materials And Structures (Guest Editorial)
INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY Journal Article Non Citation-Indexed UTM FIRST AUTHOR |
2019 |
|
Assessment Of Compressive Mechanical Behavior Of Bis-Gma Polymer Using Hyperelastic Model
POLYMERS Publication In Web Of Science CORRESPONDING AUTHOR |
2019 |
|
Deformation And Damage Mechanisms Of Material And Structures
INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY Publication In Scopus UTM FIRST AUTHOR |
2019 |
|
Nano-Level Damage Characterization Of Graphene/Polymer Cohesive Interface Under Tensile Separation
POLYMERS Publication In Web Of Science CORRESPONDING AUTHOR |
2019 |
|
Fatigue Assessment Of Steel Wire Rope
AIP CONFERENCE PROCEEDINGS Publication In Scopus UTM FIRST AUTHOR |
2019 |
|
Fatigue Damage Of Cohesive Interfaces In Fiber-Reinforced Polymer Composite Laminates
COMPOSITES SCIENCE AND TECHNOLOGY Publication In Web Of Science CORRESPONDING AUTHOR |
2019 |
|
Dynamic Responses Of Tensioned-Leg Mooring
With Gravity-Based Foundation For Floating
Offshore Wind Turbine
THE 7TH ASIA CONFERENCE ON EARTHQUAKE ENGINEERING Conference Paper CO-AUTHOR |
2018 |
|
Effects Of Welding On The Microstructural Properties Of Aisi 430 Ferritic Stainless Steel
JOURNAL OF ADVANCED RESEARCH IN MATERIALS SCIENCE Journal Article Non Citation-Indexed CO-AUTHOR |
2018 |
|
Effect Of Fiber Misalignment On Tensile Response Of
Unidirectional Cfrp Composite Lamina
JOURNAL OF ADVANCED RESEARCH IN APPLIED SCIENCES AND ENGINEERING TECHNOLOGY Journal Article Non Citation-Indexed CO-AUTHOR |
2018 |
|
Mode-Ii Interlaminar Fracture And Crack-Jump Phenomenon In Cfrp
Composite Laminate Materials
COMPOSITE STRUCTURES Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
|
Fe Model-Based Construction And Progressive Damage Processes Of Frp Composite Laminates With Different Manufacturing Processes
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
|
Effects Of Sample And Indenter Configurations Of Nanoindentation Experiment On The Mechanical Behavior And Properties Of Ductile Materials
METALS Publication In Web Of Science UTM FIRST AUTHOR |
2018 |
|
Mass Migration Damaged Based Model And The Behaviour Of Electromigration And Thermomigration In Interconnect
2018 IEEE 38TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCE (IEMT) Publication In Scopus CO-AUTHOR |
2018 |
|
Incremental Fatigue Damage Simulation For Reliability Assesment Of Steel Wire Ropes Under Fretting Fatigue Conditions
SAFETY AND RELIABILITY-SAFE SOCIETIES IN A CHANGING WORLD Book Chapter CORRESPONDING AUTHOR |
2018 |
|
Optimization Of Formaldehyde Concentration On Electroless Copper Deposition On
Alumina Surface
AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR |
2018 |
|
A Review On The Application Of The Theory Of Critical Distance Towards Concrete
MATEC WEB OF CONFERENCES Publication In Scopus CO-AUTHOR |
2018 |
|
Non-Fickian Absorption Characteristics Of Adhesive Joints: Capillary Effects And Residual Properties
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEEING Publication In Scopus CO-AUTHOR |
2018 |
|
Incremental Fatigue Damage Simulation For Reliability Assessment Of Steel Wire Ropes Under Fretting Fatigue Conditions
SAFETY AND RELIABILITY - SAFE SOCIETIES IN A CHANGING WORLD - PROCEEDINGS OF THE 28TH INTERNATIONAL EUROPEAN SAFETY AND RELIABILITY CONFERENCE, ESREL 2018 Publication In Scopus CORRESPONDING AUTHOR |
2018 |
|
Incremental Fatigue Damage Simulation For Reliability Assessment Of Steel
Wire Ropes Under Fretting Fatigue Conditions
SAFETY AND RELIABILITY - SAFE SOCIETIES IN A CHANGING WORLD Book Chapter CORRESPONDING AUTHOR |
2018 |
|
Elastic-Damage Deformation Response Of Fiber-Reinforced Polymer Composite Laminates With Lamina Interfaces
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Publication In Web Of Science CORRESPONDING AUTHOR |
2017 |
|
Methodology For Reliability Assessment Of Steel Wire Ropes Under Fretting Fatigue
Conditions
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES Publication In Web Of Science CORRESPONDING AUTHOR |
2017 |
|
Delamination Behaviour Of Carbon/Epoxy Composites
STRUCTURAL COMPOSITES: MECHANICAL PROPERTIES AND BEHAVIOUR Book Chapter CO-AUTHOR |
2017 |
|
Mixed-Mode Delamination Failures Of Quasi-Isotropic Quasi-Homogeneous Carbon/Epoxy Laminated Composite
FAILURE ANALYSIS AND PREVENTION Book Chapter CO-AUTHOR |
2017 |
|
Effect Of Etching As Pre-Treatment For Electroless Copper Plating On Silicon Wafer
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2017 |
|
Mixed-Mode Delamination Failures Of Quasi-Isotropic Quasi-Homogeneous Carbon/Epoxy Lamianted Composite
FAILURE ANALYSIS AND PREVENTION Book Chapter CORRESPONDING AUTHOR |
2017 |
|
Crack Length Dependence Of Mode Iii Delamination Using Edge Crack Torsion Test
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH Publication In Scopus CO-AUTHOR |
2017 |
|
Numerical Simulations Of Mixed-Mode Ii+Iii Delamination In Carbon/Epoxy Composite Laminate
COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE Publication In Scopus CO-AUTHOR |
2017 |
|
Cohesive Zone Modelling Of Mode Iii Delamination Using The Edge Crack Torsion Test
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES Publication In Scopus CO-AUTHOR |
2017 |
|
Fatigue Failure Analysis Of A Centrifugal Pump Shaft
FAILURE ANALYSIS AND PREVENTION Book Chapter CORRESPONDING AUTHOR |
2017 |
|
Mechanical And Fatigue Crack Growth Behavior Of Martensitic Aisi 410 Stainless Steel
1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING Proceedings CO-AUTHOR |
2016 |
|
Mode Ii Delamination Of Chopped Strand Mat E-Glass Reinforced Vinyl Ester Composite
1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016 Proceedings CO-AUTHOR |
2016 |
|
Effect Of Artificially Produced Pit-Like Defects On The Fatigue Life (S-N Curve) Of Aisi 410 Stainless Steel Compressor Blades Material
JOURNAL OF ADVANCED RESEARCH IN MATERIALS SCIENCE Journal Article Non Citation-Indexed CO-AUTHOR |
2016 |
|
Energy Absorption Ability Of Thin-Walled Square
Hollow Section Of Low Carbon Sheet Metals Under
Quasi-Static Axial Compression
JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS Journal Article Non Citation-Indexed CO-AUTHOR |
2016 |
|
Fractal Cracks Propagation In Aisi 410 Steel
JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS Journal Article Non Citation-Indexed CO-AUTHOR |
2016 |
|
Preparation And Characterization Of A Nigerian Mesoporous Clay-Based Membrane For Uranium Removal From Underground Water
CERAMICS INTERNATIONAL Publication In Web Of Science CO-AUTHOR |
2016 |
|
Effect Of Artificially Produced Pit-Like Defects On The Strength Of Aisi 410 Stainless Steel Compressor Blades
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2016 |
|
Thickness-Dependent Non-Fickian Moisture Absorption In Epoxy Molding Compounds
MICROELECTRONICS RELIABILITY Publication In Web Of Science CO-AUTHOR |
2016 |
|
Rate-Dependent Responses Of Electroless Plated And Sputtered Copper Layer During Nanoindentation Loading
PROCEEDINGS OF THE IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY (IEMT) SYMPOSIUM Publication In Web Of Science CORRESPONDING AUTHOR |
2016 |
|
Reparability Of Carbon/Epoxy Composite Laminate
ENGINEERING MATERIALS FOR SPECIFIC APPLICATION MECHANICAL PROPERTIES Book Chapter CO-AUTHOR |
2016 |
|
Reparability Of Carbon/Epoxy Composite Laminate
ENGINEERING MATERIALS FOR SPECIFIC APPLICATION: MECHANICAL PROPERTIES Book Chapter CO-AUTHOR |
2016 |
|
Effects Of Absorbed Hydrogen And Thermal Aging On Crack-Tip
ENGINEERING MATERIALS FOR SPECIFIC APPLICATION MECHANICAL POPERTIES Book Chapter CO-AUTHOR |
2016 |
|
Moisture Effects On Patch Bonded Composite Repairs
KEY ENGINEERING MATERIALS Publication In Scopus CO-AUTHOR |
2016 |
|
Prediction Of Plastic Deformation Under Contact Condition By Quasi-Static And Dynamic Simulations Using Explicit Finite Element Analysis
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Publication In Web Of Science UTM FIRST AUTHOR |
2016 |
|
Effect Of Artificially Produced Pit-Like Defects On The Strength Of Aisi 410
Stainless Steel Compressor Blades
1ST ICRIL-INTERNATIONAL CONFERENCE ON INNOVATION IN SCIENCE AND TECHNOLOGY (IICIST 2015) Conference Paper CO-AUTHOR |
2015 |
|
A Three Parameter Weibull Of Flexural Strength Variation Of Porous Sintered Clay
WORLD SCIENTIFIC AND ENGINEERING ACADEMY AND SOCIETY CONFERENCE Conference Paper CO-AUTHOR |
2015 |
|
Influence Of Water Absorption On Mode I Delamination In Carbon/Epoxy Composite Laminates
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND ADVANCED MATERIAL (ICME-AM 2015) Conference Paper CO-AUTHOR |
2015 |
|
Characterisation Of Moisture Absorption Effects On The Strength Of Composite Materials
ADVANCED MATERIALS RESEARCH Proceedings CO-AUTHOR |
2015 |
|
Interlaminar Damage Behavior Of Cfrp Composite Laminates Under
Cyclic Shear Loading Conditions
ADVANCED MATERIALS RESEARCH Proceedings CO-AUTHOR |
2015 |
|
Reliability Analysis Of Three Point Bending Strength Of Porous Sintered Clay
JURNAL MEKANIKAL Journal Article Non Citation-Indexed CO-AUTHOR |
2015 |
|
Modeling Interlaminar Shear Crack-Jump Phenomenon In Fiber-Reinforced Polymer Composites
ADVANCED MATERIALS RESEARCH Journal Article Non Citation-Indexed CORRESPONDING AUTHOR |
2015 |
|
Fatigue Characteristics Of Dual-Phase Steel Sheets
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Publication In Web Of Science CORRESPONDING AUTHOR |
2015 |
|
A Review Of Computational Damage Mechanics Of Mass Transport In Solder Joint
PROCEEDINGS OF THE IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY (IEMT) SYMPOSIUM Publication In Web Of Science CO-AUTHOR |
2015 |
|
Experimental And Numerical Studies Of Fiber Metal Laminate (Fml) Thin-Walled Tubes Under Impact Loading
ADVANCED STRUCTURED MATERIALS Publication In Scopus CO-AUTHOR |
2015 |
|
Effect Of Pitting Corrosion On Strength Of Aisi 410 Stainless Steel Compressor Blades
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2014 |
|
Estimation Of Charge Mass For High Speed Forming Of Circular Plates Using Energy Method
ADVANCED MATERIALS RESEARCH Publication In Scopus CO-AUTHOR |
2014 |
|
R-Curve Modelling Of Mode I Delamination In Multidirectional Carbon/Epoxy Composite Laminates
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2014 |
|
Cyclic Cohesive Zone Model For Simulation Of Fatigue Failure Process In Adhesive Joints
APPLIED MECHANICS AND MATERIALS Publication In Scopus CORRESPONDING AUTHOR |
2014 |
|
Effect Of Starter Defect To Giic Of Unidirectional Cfrp Composite
Applied Mechanics and Materials Publication In Scopus UTM FIRST AUTHOR |
2014 |
|
Material Parameters For Creep Rupture Of Austenitic Stainless Steel Foils
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Publication In Web Of Science UTM FIRST AUTHOR |
2014 |
|
Finite Element Analysis Of Stress Intensity Factor Of Pre-Cracked Coated Substrate Under
Contact Sliding
36TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCE (IEMT 2014) Conference Paper UTM FIRST AUTHOR |
2014 |
|
Strain Rate-Dependent Deformation And Failure Process Of Adhesive Joints-Iemt2014-P116
36TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCE (IEMT 2014) Conference Paper CORRESPONDING AUTHOR |
2014 |
|
Non-Fickian Moisture Uptake Characterisation Of Epoxy-Based Moulding Compounds
With Thickness Effect
36TH INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY CONFERENCE (IEMT 2014) Conference Paper CO-AUTHOR |
2014 |
|
Vapor Pressure Development In A Fr4-Cu Composite Structure
During Solder Reflow
THE 7TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS Conference Paper CO-AUTHOR |
2014 |
|
A Review Of Computational Damage Mechanics Of Mass Transport In Solder Joint
36TH INTERNATIONAL ELECTRONIC MANUFACTURING TECHNOLOGY CONFERENCE, 2014 Conference Paper CO-AUTHOR |
2014 |
|
Damage-Based Simulation Of
Ductile Failure Process Of Spot-Welded Joints
PROCEEDINGS OF THE 8TH SEATUC SYMPOSIU Proceedings CORRESPONDING AUTHOR |
2014 |
|
Modified Theta-Projection Concept Model For
Creep Deformation Of Austenitic Stainless Steel
Foils At Elevated Temperature
THE PROCEEDINGS OF 8TH SEATUC SYMPOSIUM Proceedings CORRESPONDING AUTHOR |
2014 |
|
Finite Element Simulation Of Ductile Failure Process Of Spot Welded Joint Under Tensile Loading
APPLIED MECHANICS AND MATERIALS Publication In Scopus CO-AUTHOR |
2014 |
|
Fatigue Characteristics Of Dual Phase Steel Sheets
9th International Conference on Fracture & Strength of Solids Proceedings CORRESPONDING AUTHOR |
2013 |
|
Modified Monkman-Grant Relationship For Austenitic Stainless Steel Foils
JOURNAL OF NUCLEAR MATERIALS Publication In Web Of Science CORRESPONDING AUTHOR |
2013 |
|
Shear-Dominated Interlaminar Fracture Process In Cfrp Composite Laminates
9TH INTERNATIONAL CONFERENCE ON FRACTURE & STRENGTH OF SOLIDS (FEOFS 2013) Conference Paper CORRESPONDING AUTHOR |
2013 |
|
A New Direction In Computational Fracture Mechanics In Materials Science: Will The Combination Of Probabilistic And Fractal Fracture Mechanics Become Mainstream
COMPUTATIONAL MATERIALS SCIENCE Publication In Web Of Science UTM FIRST AUTHOR |
2013 |
|
Large Strain Shear Compression Test Of Sheet
Metal Specimens
EXPERIMENTAL MECHANICS Publication In Web Of Science CORRESPONDING AUTHOR |
2013 |
|
Development Of Vapor Pressure In Fr4-Copper Composite Material During Solder Reflow Process
AIP CONFERENCE PROCEEDINGS Publication In Scopus CO-AUTHOR |
2012 |
|
Evolution Characteristics Of Delamination
Damage In Cfrp Composites Under
Transverse Loading
DAMAGE AND FRACTURE OF COMPOSITE MATERIALS AND STRUCTURES Book Chapter CORRESPONDING AUTHOR |
2012 |
|
Deformation Response Of Steel Sheet Metal Under Transverse Impact Loading
INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING Publication In Scopus CORRESPONDING AUTHOR |
2012 |
|
Ductile Failure Prediction Of Spot Welded Lap Joint
APPLIED MECHANICS AND MATERIALS Publication In Scopus CORRESPONDING AUTHOR |
2012 |
|
Moisture Absorption Effects On The Resistance To Interlaminar Fracture Of Woven Glass/Epoxy Composite Laminates
DAMAGE AND FRACTURE OF COMPOSITE MATERIALS AND STRUCTURES Book Chapter CO-AUTHOR |
2012 |
|
Mode I Interlaminar Fracture Characterization Of Cfrp Composite Laminates
ADVANCED MATERIALS RESEARCH Publication In Scopus CORRESPONDING AUTHOR |
2012 |
|
Drawability Of Steel Sheet Metals For Deep Drawing Process
Computationally Optimized Fuel-Efficient Concept Car Book Chapter CO-AUTHOR |
2011 |
|
Effect Of Thermal Aging On Ductile-To-Brittle Transition Temperature (Dbtt) Behavior Of Welded A516 Steel
KEY ENGINEERING MATERIALS Publication In Scopus CO-AUTHOR |
2011 |
|
Damage And Fracture Mechanics-Based Design Methodology: Constitutive And Damage Models For Steel Sheet Metals.
Computationally Optimized Fuel-Efficient Concept Car Book Chapter CORRESPONDING AUTHOR |
2011 |
|
Tensile Behaviour Of Anti-Symmetric Cfrp Composite
PROCEDIA ENGINEERING Publication In Scopus CO-AUTHOR |
2011 |
|
-
Advances in Applied Numerical Methods Book Chapter CORRESPONDING AUTHOR |
2009 |
|
-
Creep Response of Austenitic Stainless Steel Foils for Advanced Recuperator Applications Conference Paper CO-AUTHOR |
2009 |
|
Evaluation Of A Material Flow Stress Model Adopted In Finite Element Modeling Of Metal Cutting
International Journal for Manufacturing Science and Technolog Publication In Scopus CO-AUTHOR |
2009 |
|
Two-Dimensional Modeling To Compute Plastic Zone In Front Of Compact Tension Sample Of A Multiphase Material
Computational Materials Science Publication In Web Of Science CO-AUTHOR |
2009 |
|
-
Damage Mechanics of Composite Laminates under Flexural Loading Conference Paper CO-AUTHOR |
2009 |
|
-
Damage Mechanics of Solder/Pad Interface Fracture in Pb-free Solder Interconnects Conference Paper CO-AUTHOR |
2009 |
|
-
Fatigue of Sn-4Ag-0.5Cu Solder Joints during Cyclic Bending of a BGA Assembly Conference Paper CORRESPONDING AUTHOR |
2009 |
|
Thermal-Mechanical Responses Of Ti-6al-4v During Orthogonal Cutting Process
Diffusion and Defect Data. Pt A Defect and Diffusion Forum Conference Paper INDIVIDUAL AUTHOR |
2008 |
|
Thermal-Mechanical Responses Of Ti-6al-4v
During Orthogonal Cutting Process
Defect and Diffusion Forum Publication In Scopus CORRESPONDING AUTHOR |
2008 |
|
Aspect Of Modelling The Mechanics Of Solder/Intermetallic Interface Fracture Process In Solder Interconnects
Advances in Applied Numerical Methods Book Chapter INDIVIDUAL AUTHOR |
2007 |
|
Stress Analysis And Fatigue Life Prediction Of A Wobble Plate
Proceeding of Computational & Experimental Mechanics (CEM 2007) Conference Paper INDIVIDUAL AUTHOR |
2007 |
|
Stagnant Zone Formation On Diamond Cutting Tools During Machining
National Metallurgical Conference 2007 (NMC 2007) Conference Paper INDIVIDUAL AUTHOR |
2007 |
|
Effect Of Absorbed Hydrogen On Crack-Tip Ductility In The Welded A516 Steel
National Metallurgical Conference 2007 (NMC 2007) Conference Paper INDIVIDUAL AUTHOR |
2007 |
|
Hybrid Experimental-Computational Approach For Solder/Imc Interface Shear Strength Determination In Tin-Lead Solder Joints
CONTROL Conference Paper INDIVIDUAL AUTHOR |
2007 |
|
Microstructural, Mechanical Characterisation And Fractography Of As-Cast Ti-Al Alloy
National Metallurgical Conference 2007 (NMC 2007) Conference Paper INDIVIDUAL AUTHOR |
2007 |
|
Solder Joint Fatigue In A Surface Mount Assembly Subjected To Mechanical Loading
IEEE Transactions on Components and Packaging Technologies Publication In Web Of Science INDIVIDUAL AUTHOR |
2007 |
|
Influence Of R-Ratio On Fatigue Crack Growth Rate Behavior Of Type 316 Stainless Steel
Fatigue Fracture Engineering Materials Structure Publication In Scopus CO-AUTHOR |
2004 |
|
Microstructure And Environment-Dependent Fatigue Crack Propagation Properties Of Ti-48al Intermetallics
Journal of Materials Science Publication In Web Of Science CORRESPONDING AUTHOR |
2002 |
|
Fatigue Damage Mechanisms Of Bridging Fibers In Titanium Metal Matrix Composites
Journal of Engineering Materials and Technology, Transactions of the ASME Publication In Web Of Science CO-AUTHOR |
2000 |
|
Evolution Of Bridging Fiber Stress In Titanium Metal Matrix Composites At Elevated Temperature
Advances in Fatigue Lifetime Predictive Techniques Publication In Scopus CO-AUTHOR |
1996 |
|
Influence Of Interfacial Properties On Fiber Debonding In Titanium Metal Matrix Composites
Fatigue and fracture at elevated temperatures Publication In Scopus CO-AUTHOR |
1995 |
|
Evolution Of Internal States In Titanium Metal Matrix Composites Subjected To Cyclic And Creep Loading Conditions
Advances in Fatigue Lifetime Predictive Techniques Publication In Scopus CO-AUTHOR |
1995 |
|
Fracture Criterion For Bridging Fibers In Titanium Metal Matrix Composites At Elevated Temperature
Durability of composite materials Publication In Scopus CO-AUTHOR |
1995 |
|
Time-Dependent Behavior Of Continuous-Fiber-Reinforced Metal Matrix Composites: Modeling And Applications
Journal of Composites Technology & Research - J COMPOS TECH RES Publication In Scopus CO-AUTHOR |
1994 |
Legend : IP CATEGORY IP LEVEL
| Intellectual Property Name | Grant Register No. | IP Level | IP Category |
|---|---|---|---|
| INNOVATIVE MATERIALS FOR RESILIENT CONTACT SYSTEMS | LY2018006417 | NATIONAL | COPYRIGHT |
| A METHODOLOGICAL APPROACH TO MEASURE RESIDUAL YOUNG'S MODULUS DEGRADATION USING INTERRUPTED FATIGUE TESTING | NATIONAL | COPYRIGHT |
Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL
| Supervision List |
|---|
|
MUHAMMAD ADIL KHATTAK EFFECTS OF ABSORBED HYDROGEN AND THERMAL EXPOSURE ON MECHANICAL PROPERTIES, CRACK OPENING AND FATIGUE CRACK PROPAGATION OF WELDED STEEL PHD GRADUATED SUPERVISOR 2009 |
|
MOHAMMED KABASHI ELBASHEER INFLUENCE OF AUTOFRETTAGE ON PRESSURE LIMITS AND FATIGUE LIFE OF PRESSURIZED THICK-WALLED CYLINDERS PHD GRADUATED CO-SUPERVISOR 2009 |
|
NORHASHIMAH BINTI MOHD SHAFFIAR DAMAGE ZONE MODELS FOR FATIGUE OF SOLDER INNTERCONNECTS PHD GRADUATED SUPERVISOR 2012 |
|
ABDOULHDI AMHMAD BORHANA OMRAN DAMAGE MECHANICS-BASED FAILURE MODEL FOR SHEET METALS UNDER LARGE PLASTIC DEFORMATION PHD GRADUATED SUPERVISOR 2014 |
|
MU'AZU ABUBAKAR FABRICATION AND STRENGTH ANALYSIS OF CLAY-BASED MESOPOROUS MEMBRANE PHD GRADUATED CO-SUPERVISOR 2015 |
|
SEYED SAEID RAHIMIAN KOLOOR SIMULATION METHODOLOGY FOR FRACTURE PROCESSES OF COMPOSITE LAMINATES USING DAMAGE-BASED MODELS PHD GRADUATED SUPERVISOR 2016 |
|
ROOZBEH ALIPOUR IMPULSIVE SHEET METAL FORMING BASED ON STANDOFF CHARGE FOR CONICAL GEOMETRY PHD GRADUATED CO-SUPERVISOR 2017 |
|
ISMAIL BIN ABU SHAH DAMAGE MECHANICS BASED APPROACH IN FAILURE PREDICTION OF DRAW FORMING PROCESSES PHD GRADUATED SUPERVISOR 2017 |
|
SAJJAD AHMAD PHD CROSS CAMPUS SUPERVISOR |
|
MUHAMMAD A'IMULLAH BIN ABDULLAH DELAMINATION DAMAGE OF CARBON FIBER-REINFORCED POLYMER COMPOSITE LAMINATES UNDER CYCLIC SHEAR-INDUCED LOADING CONDITIONS PHD GRADUATED SUPERVISOR 2018 |
|
NAVID MOSLEMI RATCHETING ASSESSMENT OF AISI 316L STAINLESS STEEL WELDED PIPE JOINT PHD GRADUATED CO-SUPERVISOR 2019 |
|
MAHZAN BIN JOHAR MECHANICS OF ADHESIVELY BONDED JOINTS WITH DEGRADING PERFORMANCE PHD GRADUATED SUPERVISOR 2019 |
|
MOHAMMAD AMIRUL AFFIZ BIN AFRIPIN DAMAGE MECHANICS-BASED MODEL FOR RELIABILITY ASSESSMENT OF THROUGH-SILICON VIA INTERCONNECTS PHD GRADUATED SUPERVISOR 2019 |
|
MOHAMAD SHAZWAN BIN AHMAD SHAH FORMULATION OF THE THEORY OF CRITICAL DISTANCE FOR FATIGUE CHARACTERISTIC IN CONCRETE INCORPORATING VARIOUS WATER-CEMENT RATIOS PHD GRADUATED CO-SUPERVISOR 2020 |
|
NOOR HISHAM BIN ISMAIL INDUCED PLASTIC STRAIN MAPPING FOR POST-FORMING PROPERTIES OF DEEP DRAWING AUTOMOTIVE STEEL COMPONENTS PHD GRADUATED SUPERVISOR 2020 |
|
MUHAMMAD SALMAN KHAN DAMAGE MECHANICS-BASED MODEL FOR THE DEFORMATION RESPONSE AND FAILURE OF COMPOSITE HONEYCOMB CORE STRUCTURE PHD GRADUATED SUPERVISOR 2021 |
|
SITI FAIZAH BINTI MAD ASASAARI TEMPERATURE AND STRAIN-RATE DEPENDENT DAMAGE-BASED MODELS FOR LEAD-FREE SOLDER INTERCONNECTS PHD GRADUATED SUPERVISOR 2021 |
|
AZISYAHIRAH BINTI AZIZAN MESOSCALE LAMINA FATIGUE DAMAGE MODEL FOR FIBER-REINFORCED POLYMER COMPOSITE LAMINATES PHD GRADUATED SUPERVISOR 2021 |
|
MUDASSAR HUSSAIN HASHMI FRACTAL AND PROBABILISTIC ANALYSIS ON FATIGUE CRACK GROWTH RATE OF METALLIC MATERIALS PHD GRADUATED CO-SUPERVISOR 2022 |
|
MASLINDA BINTI KAMARUDIN DAMAGE-BASED FRETTING WEAR MODEL FOR LIFE PREDICTION OF STEEL WIRE ROPES PHD GRADUATED CO-SUPERVISOR 2022 |
|
SAFDAR ALI KHAN INTERLAMINAR FATIGUE DAMAGE MODEL OF CARBON FIBER-REINFORCED POLYMER COMPOSITE LAMINATES PHD GRADUATED CO-SUPERVISOR 2022 |
|
NOOR ZAFIRAH BINTI ABU BAKAR FLUID AND STRUCTURAL INTERACTIONS OF MIXED-FLOW TURBOCHARGER TURBINE UNDER STEADY AND PULSATING FLOWS PHD GRADUATED CO-SUPERVISOR 2024 |
|
SYAZWAN BIN AHMAD RASHIDI DEVELOPMENT OF MESOSCALE DAMAGE MODEL FOR NON-CRIMP FABRIC COMPOSITES.  SUGGESTION: MAYBE CAN INCLUDE KEYWORD FOR FATIGUE DAMAGE, FOR EXAMPLE: DEVELOPMENT OF PROGRESSIVE FATIGUE DAMAGE MODELLING OF NON-CRIMP FABRIC COMPOSITES. PHD ON GOING CO-SUPERVISOR |
|
ABDELMUNEM BUSHRA ABDALLA AHMED MODIFIED ANALYTICAL MODEL OF POLYMER COMPOSITE LAMINATE UNDER STRAIN RATE PHD SPECIAL CASE CO-SUPERVISOR |
|
INTANFIFIZIEANA BINTI MOHD ARIFF PREDICTION OF DAMAGE IN CFRP COMPOSITE LAMINATES USING DISPLACEMENT FIELD MEASURED BY DIC METHOD PHD ON GOING CO-SUPERVISOR |
|
OKNOVIA SUSANTI MASTER ON GOING SUPERVISOR |
|
NG CHEE WENG MECHANISM - BASED RELIABILITY MODEL FOR ELECTRONIC PACKAGES MASTER GRADUATED SUPERVISOR 2005 |
|
NORHASHIMAH BINTI MOHD SHAFFIAR MASTER GRADUATED SUPERVISOR 2005 |
|
HASSAN OSMAN ALI MOHAMMED MASTER ON GOING SUPERVISOR |
|
WONG KING JYE MASTER GRADUATED SUPERVISOR 2006 |
|
PANG HOOI SAN EVELOPMENT OF LOW COEFFICIENT OF THERMAL EXPANSION COMPOSITE SUBSTRATE FOR ELECTRONIC PACKAGING USING FINITE ELEMENT ME MASTER GRADUATED SUPERVISOR 2006 |
|
LIEW YEK BAN FAILURE ASSESSMENT OF PLASTIC/ORGANIC PACKAGE UNDER THERMA-MECHANICAL LOADING CONDITION MASTER ON GOING SUPERVISOR |
|
ABDUL HALIM BIN ABDULLAH NUMERICAL ANALYSIS OF BONE ADAPTION TO MICROMOTION AT BONE IMPLANT INTERFACES MASTER GRADUATED SUPERVISOR 2008 |
|
SEYED MOHAMMAD HOSSEIN HOSSEINI NUMERICAL CHARACTERIZATION OF PERFORATED METALLIC HOLLOW SPHERE STRUCTURES MASTER GRADUATED CO-SUPERVISOR 2009 |
|
SEYED SAEID RAHIMIAN KOLOOR SIMULATION METHODOLOGY FOR FRACTURE PROCESSES OF COMPOSITE LAMINATES USING DAMAGE-BASED MODELS MASTER GRADUATED SUPERVISOR 2009 |
|
FETHMA BINTI M. NOR MODELLING OF CRACK INITIATION & PROPAGATION IN INTERCONNECT MATERIALS MASTER GRADUATED SUPERVISOR 2009 |
|
LAI ZHENG BO EVALUATION OF FRACTURE MECHANICS-BASED MODEL FOR PB-FREE SOLDER INTERCONNECTS MASTER GRADUATED SUPERVISOR 2009 |
|
MUHAMAD ANUWAR BIN JUSOH EXPERIMENTAL APPROACH OF DRUM BRAKE SQUEAL NOISE FOR MOTORCYCLES MASTER GRADUATED SUPERVISOR 2010 |
|
AMIR AIZAD BIN MOHD FARITH ANALYSIS OF SPRINGBACK IN SHEET METAL BENDING PROCESS USING FINITE ELEMENT METHOD MASTER ON GOING SUPERVISOR |
|
MOHAMMADREZA ARJMANDI MASTER GRADUATED SUPERVISOR 2012 |
|
ALIFF FARHAN BIN MOHD YAMIN DYNAMIC FRACTURE PROCESS OF SOLDER/ INTERMETALLIC INTERFACE IN LEAD-FREE SOLDER INTERCONNECTS USING COHESIVE MODEL MASTER GRADUATED SUPERVISOR 2012 |
|
SYED MUSTIJAB HAIDER RIZVI MASTER GRADUATED SUPERVISOR 2012 |
|
SAHAR BOROUJENI MASTER GRADUATED SUPERVISOR 2012 |
|
SHARIFAH NUR AI SHIKIN BT SYED NOH DAMAGE-BASED MODEL FOR ELECTROMIGRATION-INDUCED FAILURE IN THROUGH-SILICON-VIA (TSV) INTERCONNECTS MASTER GRADUATED CO-SUPERVISOR 2013 |
|
ALI FAROKHI NEJAD MASTER GRADUATED SUPERVISOR 2013 |
|
HINA MUHAMMAD ISMAIL MASTER GRADUATED SUPERVISOR 2013 |
|
ILYA IZYAN BT SHAHRUL AZHAR MASTER GRADUATED SUPERVISOR 2013 |
|
SOROUSH PEIROVI MASTER GRADUATED SUPERVISOR 2013 |
|
REZA MANOUCHEHRY NYA DAMAGE BASED RELIABILITY MODEL FOR AUTOMOTIVE COIL SPRINGS MASTER GRADUATED SUPERVISOR 2013 |
|
FARZIN MOZAFARI NEW METHODOLOGY FOR FATIGUE LIFE PREDICTION OF WIRE ROPE   MASTER GRADUATED CO-SUPERVISOR 2013 |
|
MOHAMMAD MAHDI DEHGHAN PIR MASTER GRADUATED CO-SUPERVISOR 2013 |
|
MOJTABA AKBAR ZADEH MASTER GRADUATED CO-SUPERVISOR 2013 |
|
GHASEM GHADYANI MASTER GRADUATED CO-SUPERVISOR 2013 |
|
VAHID AHANI MASTER GRADUATED CO-SUPERVISOR 2013 |
|
SITI SYALEIZA BINTI ARSAD UNFIED CONSTITUTIVE MODELS FOR DEFORMATION OF THIN-WALLED STRUCTURES MASTER GRADUATED CO-SUPERVISOR 2013 |
|
EHSAN SHAHBAZI MASTER GRADUATED SUPERVISOR 2014 |
|
MASOUD POURASGHARLAFMEJANI MASTER GRADUATED SUPERVISOR 2014 |
|
FATIMAH MOHAMMED KADHIM MASTER GRADUATED SUPERVISOR 2014 |
|
MAZMIR BINTI MAT NOH STRESS-LIFE BEHAVIOUR OF AISI 410 MARTENSITIC STAINLESS STEEL COMPRESSOR BLADES WITH CORROSION PITS MASTER GRADUATED CO-SUPERVISOR 2016 |
|
MUHAMAD ARIFF BIN ABAS MASTER GRADUATED SUPERVISOR 2016 |
|
TAJUL ARIFFIN BIN MOHAMED NORI MASTER GRADUATED SUPERVISOR 2016 |
|
SHAHID ZAMAN MASTER GRADUATED CO-SUPERVISOR 2018 |
|
MOHD KHAIRUL HILMI BIN MOHD NOOR MASTER GRADUATED SUPERVISOR 2018 |
|
AHMAD FIKRIL KHAIRI BIN SHAHARUDIN MASTER GRADUATED SUPERVISOR 2020 |
|
JAMES CHAMUMONO BANDA MASTER GRADUATED CO-SUPERVISOR 2022 |