GRANT(PI & MEMBERS)

57

PUBLICATIONS

151

INDEXED PUBLICATION

132

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

INDUSTRY GRANTS
2
NATIONAL GRANTS
5
UNIVERSITY FUND
8
TOTAL

Publications

INDEXED PUBLICATION
132
NON-INDEXED PUBLICATION
5
OTHERS PUBLICATION
14
TOTAL

Supervisions

DEGREE
0
MASTER
40
PHD
26
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
Analysis of the Effect of Plasma Cutting Parameters on Surface Morphology of Stainless Steel and Mild Steel
TTMC SDN. BHD. Contract
2022
Prediction of Parameter Settings to Optimize the Cut Surface Quality for Computer Numerical Control Plasma Cutting Machine
TTMC SDN. BHD. Contract
2022
DEVELOPMENT OF LOW-PROFILE LOCKING COMPRESSION PLATE IMPLANT FOR ANKLE FRACTURE PATIENT
OSA Technology Sdn. Bhd. Contract
2022
Analysis the Effect of Plasma Cutting Parameters on Surface Morphology of Stainless Steel and Mild Steel
TTMC SDN. BHD. Contract
2021
Optimization of Cut Surface Quality for Computer Numerical Control Plasma Cutting Machine
TTMC SDN. BHD. Contract
2021
Improvement of Bioactivity and Mechanical Properties of Zirconium Mesoporous Borosilicate Bioactive Glass/PCL/PLA Scaffolds
UNIVERSITI TEKNOLOGI MARA Non Goverment Agency
2021
4B674 : Improvement of Bioactivity and Mechanical Properties of Zirconium Mesoporous Borosilicate Bioactive Glass/PCL/PLA Scaffolds
RUG OF UTM Matching Grant
2021
Advancing The Understanding On Biomaterials Degradation Through A Combinatory Approach Of Advanced AFM-Based Corrosion Assessment And Computer Simulation
RUG OF UTM Fellow Research Grant
2020
Analysis of Newly Designed Road Barrier for Use on Malaysia Road
PESAKO TECHNOLOGY SDN BHD Contract Research DTD
2020
Porous silica aerogel films as super-insulating adsorbent material for preservation of fresh water reservoir
RUG OF UTM UTM Fundamental Research
2020
Microstructural and corrosion investigation of GO/CNT nanostructured coating on porous Ti-30 at.%Ta shape memory alloys for biomedical application
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2019
UTM-TDR 10: NEW GENERATION MATERIALS WITH ULTRAHIGH PERFORMANCE FOR HIGH IMPACT INDUSTRIES
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 10.4 (T2) Optimization of Cold-Drawn Steel Wire Rope
RUG OF UTM UTM Transdiciplinary Research Grant
2018
COMPUTATIONAL APPROACH OF DYNAMIC DEGRADATION BEHAVIOUR OF POROUS MAGNESIUM UNDER PHYSIOLOGICAL ENVIRONMENT OF HUMAN CANCELLOUS BONE
RUG OF UTM Tier 1
2018
POROSITY EVALUATION AND MECHANICAL PROPERTIES OF HELIUM SEALED HARD DISK DRIVE FABRICATED BY SEMISOLID FORGING PROCESS
RUG OF UTM Tier 1
2017
SURFACE MODIFICATION OF PLASMA SPRAYED DCL THERMAL BARRIER COATING FOR HIGH TEMPERATURE APPLICATIONS
RUG OF UTM Tier 1
2017
THE KINETIC OF ZN-AL-MG COATING GROWTH ON ALLOY STEEL FOR OFFSHORE MOORING AND CRANE ROPE FACILITIES
RUG OF UTM Tier 1
2017
Development of Maerogel/Epoxy Composite For Sustainable Thermal Insulation Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2017
CYTOTOXICITY AND ANTIMICROBIAL COATING OF NOVEL BIOGLASSES- GRAPHENE OXIDE COMPOSITES ONTO TITANIUM IMPLANT FOR ORTHOPAEDIC APPLICATIONS
RUG OF UTM Tier 1
2016
Thermal spray coated cobalt-chromium-molybdenum loaded with silver nanoparticles for medical implants
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2015
The effect of halogenated based ceramics on the degradation and bioactivity of biodegradable magnesium-based alloys
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2015
Mechanical and Thermal Performance of Maerogel-Based Insulation Layer For Polymeric Composite Materials
RUG OF UTM Tier 1
2015
Interfacial Reaction between Silicon wafer, Underlayers and Cu-Interconnection Filler of Through-Silicon Via (TSV)
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2014
DEVELOPMENT OF COMBINED IN-SITU AND EX-SITU ALUMINIUM METAL MATRIX COMPOSITE
RUG OF UTM Professional Development UTM
2014
Fabrication of mini tube for stent applications.
RUG OF UTM Tier 1
2014
MACHINABILITY OF ADVANCED MATERIALS FOR MEDICAL DEVICES AND ENGINEERING APPLICATIONS
RUG OF UTM Tier 1
2014
Corrosion and Mechanical Properties Investigation of Nanostructured Composite Ceramics Coating on superalloys material for aerospace applications
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2013
Investment casting of biodegradable magnesium alloys
POST DOCTORAL FELLOWSHIP Professional Development Research University
2013
MAGNESIUM ALLOYS SHELL INVESTMENT CASTING BY IN-SITU MELTING TECHNIQUE
RUG OF UTM Tier 1
2012
Design and Simulation of Racquet-Based Sports Equipments
RUG OF UTM Flagship
2011
Electrophoretic Nano hydroxyapatite coating on Mg-1.0ca alloy for surgical implant applications
RUG OF UTM Tier 1
2011
Evaluation of Coolant Strategies in High Speed Machining (HSM) of Advanced Materials
RUG OF UTM Tier 1
2011
DEVELOPMENT OF IN- SITU MAGNESIUM-SILICON REINFORCED ALUMNIUM COMPOSITES
RUG OF UTM Tier 1
2011
Diffusion Evaluation Of Hydroxyapatite On Biometallic Implant Using Investment Casting Technique
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2010
Development of Binary MG-CA Alloys as Biodegradable Bone Scaffold
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2009
Development of Hydroxyapatite Biomimetic Coating of Biomedical Grade Metallic Implant Using Investment Casting Technique
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2007
Identifikasi dan Pembentukan Standard Efektif dan Efisyen untuk Perkhidmatan Penyenggaraan Bangunan Lembaga Tabung Haji
Contract
2001
Persijilan ISO9001: 2000: Pengurusan Kewangan di Jabatan Kewangan
Contract
2001
AN ANALYSIS ON BUSINESS PROCESS, CORE SERVICEWS AND OUTSOURCE ACTIVITIES OF HAJI OPERATIONS IN MALAYSIA AND SAUDI ARABIA FOR DEVELOPING AN EFFECTIVE QUALITY MANAGEMENT SYSTEM
LEMBAGA TABUNG HAJI MALAYSIA Contract
2000
Precision Shell Investment Casting of Aluminium Alloy Turbo Charger Impeller
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2000
Merekabentuk Sistem Pengurusan Kualiti untuk Pendaftaran Pengendalian Haji di Ibu Pejabat Tabung Haji
LEMBAGA TABUNG HAJI MALAYSIA Contract
2000
Penambahbaikan Interaksi Proses Bisnes untuk Perkhidmatan Deposit dan pengeluaran Tabung Haji
Contract
2000
Optimization of the Investment Casting Mould Production Procedure for Non-Ferrous Alloys
Short Term
1999
NGV Refueling Facilities and Equipment
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1998
Business Process Improvement for CPO and PK
Contract
1998
Determining Quality Business Process for Surge Arrestor / Pencil Stroking
Contract
1998
Development of Fuel Cell Powered Automotive Thermal Comfort and Refrigeration System
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1998
Development of Fuel Cell Powered Automotive Thermal Comfort and Refrigeration System
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1998
Development of Thin-Wall Ductile Iron Castings for Automotive Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1998
Quality Optimisation of Precision Cast Magnesium-Base Alloy for Aerospace Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1994
Processing Of Magnesium-Base Alloys Using Ceramic Shell Investment Casting Process
Short Term
1993
Design and prototyping a super-kart
Short Term
1992
Development of Cast Particulate Alumunium-matrix Composites for Automotive Applications
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
1992

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Influence Of Solution Heat Treatment On Microstructure And Tensile Properties Of Gd-Treated Al-15% Mg2si In-Situ Composites
JOURNAL OF APPLIED SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2022
Effect Of Mo Addition On The Pitting Resistance Of Timn Alloys In Hanks’ Solution
JOURNAL OF ALLOYS AND COMPOUNDS
Publication In Web Of Science CO-AUTHOR
2021
Microstructural Characterization Of Modified Plasma Spray Lz/Ysz Thermal Barrier Coating By Laser Glazing
MATERIALS TODAY-PROCEEDINGS
Publication In Web Of Science CO-AUTHOR
2021
Degradation‐Triggered Release From Biodegradable Metallic Surfaces
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B: APPLIED BIOMATERIALS
Publication In Web Of Science CO-AUTHOR
2021
Effect Of Simultaneous Addition Of Ba And Sb On Microstructural And Phase Reaction Characteristics Of Al-20mg2si Alloy
29TH SCIENTIFIC CONFERENCE OF MICROSCOPY SOCIETY OF MALAYSIA (SCMSM2021),
Conference Paper CO-AUTHOR
2021
Effect Of Forging Temperature On Biodegradable Mg-0.7% Ca Alloy Properties For Implant Application
IOP CONFERENCE SERIES : MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2021
A Preliminary Study Of Fabrication Technology For Dynamic Compression Plates Using Centrifugal Casting Process
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2021
Performance And Wear Mechanisms Of Uncoated, Tialn, And Altin-Coated Carbide Tools In High-Speed Drilling Of Al-Si Alloy
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Publication In Web Of Science CO-AUTHOR
2021
Influence Of Barium Addition On The Formation Of Primary Mg2si Crystals From Al-Mg-Si Melts
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR
2021
Microstructural Evaluation And Thermal Oxidation Behaviors Of Ysz/ Nicocralyta Coatings Deposited By Different Thermal Techniques
CERAMICS INTERNATIONAL
Publication In Web Of Science CO-AUTHOR
2020
Zinc-Doped Hydroxyapatitezeolite/Polycaprolactone Composites Coating On Magnesium Substrate For Enhancing In-Vitro Corrosion And Antibacterial Performance
TRANSACTION OF NONFERROUS METALS SOCIETY OF CHINA
Publication In Web Of Science CO-AUTHOR
2020
Microstructural Characterization, Solidification Characteristics And Tensile Properties Of Al-15 Mg2si-X(Gd-Sb) In-Situ Composite
Journal of Materials Research and Technology-
Publication In Web Of Science CORRESPONDING AUTHOR
2020
The Simultaneous Effect Of Extrusion Ratio And Solution Heat Treatment On The Microstructure And Tensile Properties Of Extruded Al- 15%Mg2si-1.0%Gd Composite
MATERIALS SCIENCE FORUM
Publication In Scopus CO-AUTHOR
2020
Influence Of Cooling Rate On Morphology Evolution Of Primary Mg2si In Al-15mg2si-1.0gd In Situ Composite
MALAYSIAN JOURNAL OF MICROSCOPY
Publication In Scopus CO-AUTHOR
2020
Mechanical And Degradation Properties Of Zinc Adopted Magnesium Alloys For Biomedical Application
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Evaluation Of As Cast Aluminium Alloy Tubes Fabricated By Using Horizontal True Centrifugal Casting Technique
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2019
Effect Of Mechanical Tumbling Parameters On Surface Roughness And Edge Radius Of Medical Grade Cobalt Chromium Alloy
INTERNATIONAL JOURNAL OF ADVANCED SCIENCE ENGINEERING AND INFORMATION TECHNOLOGY (IJASEIT)
Publication In Scopus UTM FIRST AUTHOR
2019
Effect Of Pouring Temperatures On Porosity And Mechanical Properties Of Gravity Die Casting Magnesium Alloy
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Effect Of Wash Solvents On Salt Removal In Rice Husk Derived Nano-Silica
AIP Conference Proceedings
Publication In Web Of Science CO-AUTHOR
2019
High Speed End Milling Of Cobalt Chromium Molybdenum Alloy Using Solid Carbide Tool Under Mql Condition
AIP CONFERENCE PROCEEDINGS
Publication In Scopus CO-AUTHOR
2019
Mechanical And Wear Behaviour Of Nanostructure Tio2-Ag Coating On Cobalt Chromium Alloys By Air Plasma Spray And High Velocity Oxy-Fuel
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2019
Effect Of Semi-Solid Forming Temperature And Heat Treatment On Mechanical Properties Of Mg-Al-Zn Alloy (Az91d) For Automotive Application
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2019
Proceedings UTM FIRST AUTHOR
2019
Physiochemical And Thermal Properties Of Silica AerogelãƒÂ¢Ã‚€Â“Poly Vinyl Alcohol / CoreãƒÂ¢Ã‚€Â“Shell Structure Prepared Using Fluidized Bed Coating Process For Thermal Insulation Applications
MATERIALS CHEMISTRY AND PHYSICS
Publication In Web Of Science CO-AUTHOR
2018
Dispersion Of Polymeric-Coated Silica Aerogel Particles In Unsaturated Polyester Composites: Effects On Thermal-Mechanical Properties
Journal of Dispersion Science and Technology
Publication In Web Of Science CO-AUTHOR
2018
Characterisation Of Al65cu20fe15 Quasicrystal Alloy Synthesised Via In-Situ Casting Under Standard Room Ambient And Argon Enriched Atmosphere
INTERNATIONAL JOURNAL OF CURRENT SCIENCE, ENGINEERING & TECHNOLOGY
Journal Article Non Citation-Indexed CO-AUTHOR
2018
Effect Of Casting And Mould Cooling Temperatures On The Warping Phenomenon Of Aluminium At High Pressure Die- Casting
CELSCITECH TOWARDS DOWNSTREAM AND COMMERCIALIZATION OF RESEARCH (CELSCITECH - 2018)
Conference Paper UTM FIRST AUTHOR
2018
Effect Of Cooling Rates On Morphology Evolution Of Primary Mg2si In Alã¢Â€Â“15mg2siã¢Â€Â“0.3ba In-Situ Composite
27TH SCIENTIFIC CONFERENCE OF MICROSCOPY SOCIETY MALAYSIA
Conference Paper CO-AUTHOR
2018
Verification Of In House Design For Horizontal True Centrifugal Casting Machine Via Aluminium Alloy Casting
INTERNATIONAL CONFERENCE ON X-RAYS AND RELATED TECHNIQUES IN RESEARCH AND INDUSTRY
Conference Paper UTM FIRST AUTHOR
2018
The Effect Of Atmospheric Plasma Spray Distance Of The Agglomerated Maerogel Coated On Inconel 625 Substrate
Corrosion Engineering Science and Technology
Publication In Web Of Science CO-AUTHOR
2018
Shell Mould Strength Of Rice Husk Ash (Rha) And Bentonite Clays In Investment Casting
JOURNAL ON ADVANCED SCIENCE, ENGINEERING AND INFORMATION TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2018
Effect Of Ultrasonic Electro-Chemical Polishing Parameters On Surface Roughness And Material Removal Rate Of Medical Grade Cobalt Chromium Alloys
JOURNAL ON ADVANCED SCIENCE, ENGINEERING AND INFORMATION TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2018
Microstructure Analysis Of Hydroxyapatite Coating On Stainless Steel 316l Using Investment Casting Technique For Implant Application
JOURNAL OF ADVANCED SCIENCE ENGINEERING INFORMATION TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2018
Effects Of Rice Husk Derived Amorphous Silica On The Thermal-Mechanical Properties Of Unsaturated Polyester Composites
JOURNAL OF MACROMOLECULAR SCIENCE, PART B: PHYSICS
Publication In Web Of Science CO-AUTHOR
2018
Effect Of Gadolinium Addition On Microstructural Evolution And Solidification Characteristics Of Al-15%Mg2si In-Situ Composite
MATERIALS CHARACTERISATION
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Effect Of Hot Extrusion On Microstructural Evolution And Tensile Properties Of Al-15%Mg2si-Xgd In-Situ Composites
JOURNALS OF ALLOYS AND COMPOUNDS
Publication In Web Of Science UTM FIRST AUTHOR
2018
Hydroxyapatite And Fluoridated Hydroxyapatite Coatings And Their Effects On Commercially Pure Magnesium Corrosion Response
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
Publication In Web Of Science UTM FIRST AUTHOR
2017
Machinability Of Cobalt-Based And Cobalt Chromium Molybdenum Alloys - A Review
PROCEDIA MANUFACTURING
Publication In Scopus CO-AUTHOR
2017
Effect Of High Speed End Milling Of Co-28cr-6mo Cobalt Chromium Molybdenum Alloy Using Uncoated And Coated Carbide Tools
JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus CO-AUTHOR
2017
Effects Of Silica Aerogel Particle Sizes On The Thermal-Mechanical Properties Of Silica Aerogel-Unsaturated Polyester Composites
PLASTICS, RUBBER AND COMPOSITES
Publication In Web Of Science CO-AUTHOR
2017
Thermal Gravimetric Analysis Of Unsaturated Polyesters Filled With Alumina Trihydrate And Silica Aerogel
SOLID STATE PHENOMENA
Publication In Scopus CO-AUTHOR
2017
Charactecrization Of Al65cu20fe15 Quasicrystal Alloy Synthesized Via Insitu Casting Under Standard Room Ambient And Argon Enriched Atmosphere
CONFERENCE ON ADVANCED MATERIALS CHARACTERIZATION TECHNIQUES 2017
Conference Paper CO-AUTHOR
2017
Effects Of Activated Charcoal On Physical And Mechanical Properties Of Microwave Dewaxed Investment Casting Moulds
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY
Publication In Scopus CO-AUTHOR
2016
Nano-Hydroxyapatite Reinforced Zeolite Zsm Composites: A Comprehensive Study On The Structural And In Vitro Biological Properties
CERAMICS INTERNATIONAL
Publication In Web Of Science CO-AUTHOR
2016
The Role Of Solution Heat Treatment On Corrosion And Mechanical Behaviour Of Mg-Zn Biodegradable Alloys
CANADIAN METALLURGICAL QUARTERLY
Publication In Web Of Science UTM FIRST AUTHOR
2016
Topography, Wetting, And Corrosion Responses Of Electrodeposited Hydroxyapatite And Fluoridated Hydroxyapatite On Magnesium
BIO-MEDICAL MATERIALS AND ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR
2016
Effect Of Primary And Eutectic Mg2si Crystal Modifications On The Mechanical Properties And Sliding Wear Behaviour Of An Al-20mg2si-2cu-Xbi Composite
JOURNAL OF MATERIALS SCIENCE AND TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR
2016
Characterizing Sintered Nano-Hydroxyapatite Sol-Gel Coating Deposited On A Biomedical Ti-Zr-Nb Alloy
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
Publication In Web Of Science UTM FIRST AUTHOR
2016
Effect Of Surface Roughness And Taper Angle On Junction Strength Of Modular Biomedical Implant
INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2016
The Effect Of Argon Controlled Pre-Oxidation On Tgo Formation Of Nicocralyta/Ysz
Key Engineering Materials
Publication In Scopus CO-AUTHOR
2016
Thermal Properties Of Unsaturated Polyester Composites Filled With Rice Husk Derived - Silica Aerogel
Polymers Research Journal
Journal Article Non Citation-Indexed CO-AUTHOR
2016
Rapid Prototyping Evaluation On Multijet And Fused Deposition Modeling Patterns For Investment Casting
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS
Publication In Web Of Science CO-AUTHOR
2016
Tgo Formation With Nicocralyta Bond Coat Deposition Using Aps And Hvof Method
ADVANCED MATERIALS RESEARCH
Proceedings CO-AUTHOR
2015
Thermal Response Of Activated Charcoal Modified Investment Casting Moulds
ADVANCED MATERIALS RESEARCH
Proceedings CO-AUTHOR
2015
Effects Of Casting Parameters On Shape Replication And Surface Roughness Of Lm6 Aluminium Alloy Cast Using Lost Foam Process
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
Publication In Web Of Science UTM FIRST AUTHOR
2015
Evaluation Of The Effect Of Sicp Ratio On Microstructural And Dry Sliding Wear Behavior Of A356/Xsicp Composites
4TH INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING TECHNOLOGY
Conference Paper CO-AUTHOR
2015
Effect Of Solution Treatment On Corrosion Characteristics Of Biodegradable MgãƒÂƒÃ‚¢Ã‚€Â“6zn Alloy
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
Publication In Web Of Science UTM FIRST AUTHOR
2015
Effects Of Activated Charcoal On Dewaxing Time In Microwave Hybrid Heating
PROCEDIA CIRP
Publication In Scopus UTM FIRST AUTHOR
2015
Partially Degradable Friction-Welded Pure Iron-Stainless Steel 316l Bone Pin
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
Publication In Web Of Science CO-AUTHOR
2015
Optimisation Of Electrophoretic Deposition Parameters In Coating Of Metallic Substrate By Hydroxyapatite Using Response Surface Methodology
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
Publication In Web Of Science CORRESPONDING AUTHOR
2015
Effect Of Bismuth And Strontium Interaction On The Microstructure Development, Mechanical Properties And Fractography Of A Secondary Al-Si-Cu-Fe-Zn Alloy
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publication In Web Of Science UTM FIRST AUTHOR
2015
Evaluation Of The Effect Of Grain Refiners On The Solidification Characteristics Of An Sr-Modified Adc12 Die-Casting Alloy By Cooling Curve Thermal Analysis
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Publication In Web Of Science CORRESPONDING AUTHOR
2015
Effect Of Sicp Weight Fraction On Microstructure And Impact Behavior Of Compocast A356/Xsicp Composites
4TH INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING TECHNOLOGY (ICAMT2015)
Conference Paper UTM FIRST AUTHOR
2015
Application Of Metallic Biomaterial For Medical Implants: A Review
5TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE AND HUMANITIES 2014 (IGCESH 2014)
Proceedings CO-AUTHOR
2014
A New Approach To Assess The Effects Of Sr And Bi Interaction In Adc12 Al-Si Die Casting Alloy
THERMOCHIMICA ACTA
Publication In Web Of Science CO-AUTHOR
2014
Mechanical And Bio-Corrosion Properties Of Quaternary Mg-Ca-Mn-Zn Alloys Compared With Binary Mg-Ca Alloys
MATERIALS AND DESIGN
Publication In Web Of Science UTM FIRST AUTHOR
2014
On The Refinement Mechanism Of Silicon In Al-Si-Cu-Zn With Addition Of Bismuth
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
Publication In Web Of Science CO-AUTHOR
2014
The Effects Of Solidification On The Microstructure And Mechanical Properties Of Modified Ductile Ni-Resist Iron With A High Manganese Content
MATERIALS SCIENCE AND ENGINEERING A
Publication In Web Of Science UTM FIRST AUTHOR
2014
Corrosion Resistance Of Epd Nanohydroxyapatite Coated 316l Stainless Steel
SURFACE ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR
2014
The Sequence Of Intermetallic Formation And Solidification Pathway Of An Al-13mg-7si-2cu In-Situ Composite
MATERIALS CHARACTERIZATION
Publication In Web Of Science CO-AUTHOR
2014
Role Of Bismuth On Solidification, Microstructure And Mechanical Properties Of A Near Eutectic Al-Si Alloys
METALS AND MATERIALS INTERNATIONAL
Publication In Web Of Science CO-AUTHOR
2014
Effect Of Heat Treatment On The Microstructure And Corrosion Behaviour Of Mg-Zn Alloys
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION
Publication In Web Of Science CO-AUTHOR
2014
Characterisation Of Calcium Phosphate Coating On Investment Cast 316l Stainless Steel
MATERIALS RESEARCH INNOVATIONS
Publication In Web Of Science UTM FIRST AUTHOR
2014
Evaluations Of Antimony And Strontium Interaction In An Al-Si-Cu-Zn Die Cast Alloy
THERMOCHIMICA ACTA
Publication In Web Of Science UTM FIRST AUTHOR
2014
AuthorsãƒÂƒÃ‚ƒÃ‚¢Ã‚€Â™ Reply To Discussion Of ‘‘On The Refinement Mechanism Of Silicon In Al-Si-Cu-Zn Alloy With Addition Of BismuthãƒÂƒÃ‚ƒÃ‚¢Ã‚€Â™Ã¢Â€Â™
METALLURGICAL AND MATERIALS TRANSACTIONS A: PHYSICAL METALLURGY AND MATERIALS SCIENCE
Publication In Scopus CO-AUTHOR
2014
Effect Of Friction Stir Welding Pin Shape On Mechanical Properties Of Aa6061 Alloy Weldment
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CORRESPONDING AUTHOR
2014
An Alternative Approach In Ceramic Shell Investment Casting Of Az91d Magnesium Alloy: In Situ Melting Technique
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Publication In Scopus UTM FIRST AUTHOR
2014
Phase Evaluation Of Pure Mg-1ca And Mg-1ca-3zn Alloys By Thermal Analysis Used In Medical Applications
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2014
Effect Of Thickness And Permeability Of Ceramic Shell Mould On In-Situ Melted Az91d Investment Casting
APPLIED MECHANICS AND MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2014
Combined Effect Of Bismuth Content And Cooling Rate On Microstructure And Mechanical Properties Of Al-8ã‚·5si-0ã‚·4mg-0ã‚·3fe Alloy
CANADIAN METALLURGICAL QUARTERLY
Publication In Scopus CO-AUTHOR
2013
Computer-Aided Cooling Curve Thermal Analysis Of Near Eutectic Al-Si-Cu-Fe Alloy: Effect Of Silicon Modifier/Refiner And Solidification Conditions On The Nucleation And Growth Of Dendrites
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Publication In Scopus CO-AUTHOR
2013
Mechanical Properties Of Stabilized Zirconia Nanocrystalline Eb-Pvd Coating Evaluated By Micro And Nano Indentation
JOURNAL OF ADVANCED CERAMICS
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2013
Microstructure And Mechanical Properties Of Modified Ductile Ni-Resist With Higher Manganese Content
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publication In Web Of Science UTM FIRST AUTHOR
2013
Effect Of Inoculation On Microstructure, Mechanical And Corrosion Properties Of High Manganese Ductile Ni-Resist Alloy
MATERIALS AND DESIGN
Publication In Web Of Science UTM FIRST AUTHOR
2013
Thermal Characteristics And Corrosion Behaviour Of Mg-Xzn Alloys For Biomedical Applications
BULLETIN OF MATERIALS SCIENCE
Publication In Web Of Science UTM FIRST AUTHOR
2013
An Investigation On Interfacial Reaction Between In-Situ Melted Az91d Magnesium Alloy And Ceramic Shell Mold During Investment Casting Process
MATERIALS CHEMISTRY AND PHYSICS
Publication In Web Of Science UTM FIRST AUTHOR
2013
Cold Deformation And Heat Treatment Influence On The Microstructures And Corrosion Behavior Of Aisi 304 Stainless Steel
CANADIAN METALLURGICAL QUARTERLY
Publication In Web Of Science CO-AUTHOR
2013
Influence Of Flux On Melting Characteristics And Surface Quality Of In-Situ Melting Az91d
MATERIALS AND MANUFACTURING PROCESSES
Publication In Web Of Science UTM FIRST AUTHOR
2013
Effect Of Calcium Content On The Microstructure, Hardness And In-Vitro Corrosion Behavior Of Biodegradable Mg-Ca Binary Alloy
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS
Publication In Web Of Science CORRESPONDING AUTHOR
2013
Synthesis And In Vitro Degradation Evaluation Of The Nano-Ha/Mgf2 And Dcpd/Mgf2 Composite Coating On Biodegradable Mg-Ca-Zn Alloy
SURFACE AND COATINGS TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR
2013
Statistical Analysis, Modeling, And Optimization Of Thrust Force And Surface Roughness In High-Speed Drilling Of Al-Si Alloy
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
Publication In Web Of Science CO-AUTHOR
2013
Effect Of Fluoride Treatment On Corrosion Behavior Of Mg-Ca Binary Alloy For Implant Application
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
Publication In Web Of Science UTM FIRST AUTHOR
2013
Differential Ceramic Shell Thickness Evaluation For Direct Rapid Investment Casting
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2013
Gold Recovery From Weee By Chlorine System
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CORRESPONDING AUTHOR
2013
Investigation On Tungsten Inert Gas Welding Of In Situ Al-15 And 20 Mg2si Composites With An Al-Si Filler
JOURNAL OF COMPOSITE MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2013
Evaluation Of Significant Manufacturing Parameters In Lost Foam Casting Of Thin-Wall Al-Si-Cu Alloy Using Full Factorial Design Of Experiment
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (ENGLISH EDITION)
Publication In Scopus CORRESPONDING AUTHOR
2013
In Situ Melting And Solidification Assessment Of Az91d Granules By Computer-Aided Thermal Analysis During Investment Casting Process
MATERIALS AND DESIGN
Publication In Scopus UTM FIRST AUTHOR
2013
Collapsibility Studies Of Mjm Acrylate Patterns For Investment Casting
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2013
Effect Of Secondary Phase On The Corrosion Behavior Of Mg-Ca And Mg-Zn Binary Alloys
ADVANCED SCIENCE LETTERS
Publication In Scopus UTM FIRST AUTHOR
2013
Effect Of Fluoride Conversion Coating On Corrosion Of Behavior Of Mg-Ca-Zn Alloy
ADVANCED MATERIALS RESEARCH
Publication In Scopus CORRESPONDING AUTHOR
2013
Effect Of Applying Air Pressure On Gas Porosity In Lost Foam Casting Of Al-Si Alloy
ADVANCED MATERIALS RESEARCH
Publication In Scopus UTM FIRST AUTHOR
2013
The Effect Of Inoculation On Properties Of Modified Ductile Ni-Resist Alloy
KEY ENGINEERING MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2013
Effects Of Zn And Ca Additions On The Solidification Behavior And Microstructure Analysis Of Mg And Mg-6zn Alloys
ADVANCED SCIENCE LETTERS
Publication In Scopus CO-AUTHOR
2013
A Review Of Ceramic Shell Investment Casting Of Magnesium Alloys And Mold-Metal Reaction Suppression
MATERIALS AND MANUFACTURING PROCESSES
Publication In Scopus UTM FIRST AUTHOR
2013
Effect Of Magnesium And Nickel Coatings On The Wetting Behavior Of Alumina Toughened Zirconia By Molten Al-Mg Alloy
INTERNATIONAL JOURNAL OF MINERALS, METALLURGY AND MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2012
Effect Of Pattern Coating Thickness On Characteristics Of Lost Foam Al-Si-Cu Alloy Casting
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (ENGLISH EDITION)
Publication In Scopus CO-AUTHOR
2012
Characterization Of Az91d Granules Covered With A Flux During In-Situ Melting
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
Publication In Web Of Science UTM FIRST AUTHOR
2012
Tool Life Prediction Model Of Uncoated Carbide Tool In High Speed Drilling Of Al-Si Alloy Using Response Surface Methodology
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING
Publication In Web Of Science CO-AUTHOR
2012
Microstructure Analysis And Corrosion Behavior Of Biodegradable Mg-Ca Implant Alloys
MATERIALS AND DESIGN
Publication In Web Of Science CORRESPONDING AUTHOR
2012
Relationship Between The Corrosion Behavior And The Thermal Characteristics And Microstructure Of Mg-0.5ca-Xzn Alloys
CORROSION SCIENCE
Publication In Web Of Science CO-AUTHOR
2012
In-Situ Thermal Analysis And Macroscopical Characterization Of Mg-Xca And Mg-0.5ca-Xzn Alloy Systems
THERMOCHIMICA ACTA
Publication In Web Of Science UTM FIRST AUTHOR
2012
Characterisation And Corrosion Behaviour Of Biodegradable Mg-Ca And Mg-Ca-Zn Implant Alloys
APPLIED MECHANICS & MATERIALS
Publication In Web Of Science CO-AUTHOR
2012
Effect Of Hf Concentration On Corrosion Resistance Of Biomedical Implants
ADVANCED MATERIALS RESEARCH
Publication In Scopus CORRESPONDING AUTHOR
2012
Characteristics Of As-Cast And Forged Biodegradable Mg-Ca Binary Alloy Immersed In Kokubo Simulated Body Fluid
ADVANCED MATERIALS RESEARCH
Publication In Scopus CORRESPONDING AUTHOR
2012
In-Situ Melting Assessment Of Az91d Granules By Thermal Analysis
ADVANCED SCIENCE LETTERS
Publication In Scopus UTM FIRST AUTHOR
2012
Effect Of Flux Composition On Mould-Magnesium Reaction During In-Situ Melting
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2012
Influence Of Hot Rolling Parameters On Microstructure And Biodegradability Of Mg-1ca Alloy In Simulated Body Fluid
MATERIALS AND DESIGN
Publication In Scopus CORRESPONDING AUTHOR
2012
Properties Of Pressurized Lost Foam Casting Of Al-11si Alloy
ADVANCED MATERIALS RESEARH
Publication In Scopus UTM FIRST AUTHOR
2012
The Usage Of Computer-Aided Cooling Curve Thermal Analysis To Optimise Eutectic Refiner And Modifier In Al-Si Alloys
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
Publication In Scopus CO-AUTHOR
2012
Doe Applied To Study The Effect Of Process Parameters On Silicon Spacing In Lost Foam Al-Si-Cu Alloy Casting
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2012
Rheological Behavior And Stability Of Cassava Starch For Ceramic Mould Binder Application
ADVANCED MATERIALS RESEARCH
Publication In Scopus UTM FIRST AUTHOR
2012
Effect Of Casting Parameters On Porosity In Lfc
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2012
Effects Of Pouring Temperature And Slurry Viscosity On Heat Transfer And Surface Roughness In Lost Foam Casting
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2012
Analysis Of The Effect Of Sand Size And Vibration Time On Surface Roughness In Lost Foam Casting Of Lm6 Alloy By Design Of Experiments
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2011
Oxidation And Melting Characterizations Of Az91d Granules During In-Situ Melting
ADVANCED MATERIAL RESEARCH
Publication In Scopus UTM FIRST AUTHOR
2011
Doe Analysis Of The Influence Of Sand Size And Pouring Temperature On Porosity In Lfc
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR
2011
Effect Of Pouring Temperature And Melt Treatment On Microstructure Of Lost Foam Casting Of Al-Si Lm6 Alloy
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2011
Effect Of Bismuth On Microstructure Of Unmodified And Sr-Modified Al-7si-0.4mg Alloys
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (ENGLISH EDITION)
Publication In Scopus CO-AUTHOR
2011
High Temperature Oxidation Of Az91d Magnesium Alloy Granule During In-Situ Melting
CORROSION SCIENCE
Publication In Scopus UTM FIRST AUTHOR
2011
Eis Study Of Corrosion Behavior Of Metallic Materials In Ethanol Blended Gasoline Containing Water As A Contaminant
FUEL
Publication In Scopus UTM FIRST AUTHOR
2011
Process Control Of Lost Foam Casting Slurry Viscosity And Dipping Time
JOURNAL OF APPLIED SCIENCE
Publication In Scopus CO-AUTHOR
2011
Poisoning Effect Of Bismuth On Modification Behaviour Of Strontium In Lm25 Alloy
BULLETIN OF MATERIAL SCIENCE
Publication In Scopus CO-AUTHOR
2011
Chip Morphology Study In High Speed Drilling Of Al-Si Alloy
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Publication In Web Of Science CO-AUTHOR
2011
Effect Of Multi-Step Tempering On Retained Austenite And Mechanical Properties Of Low Alloy Steel
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
Publication In Web Of Science UTM FIRST AUTHOR
2011
Premature Failure Analysis Of Forged Cold Back-Up Roll In A Continuous Tandem Mill
MATERIALS & DESIGN
Publication In Web Of Science UTM FIRST AUTHOR
2011
Effect Of Pressure On Structure And Properties Of Lost Foam Casting Of Al-11si Cast Alloy
APPLIED MECHANICS AND MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2011
Effect Of Forging Process On Microstructure, Mechanical And Corrosion Properties Of Biodegradable Mg-1ca Alloy
MATERIALS & DESIGN
Publication In Scopus UTM FIRST AUTHOR
2011
Artificial Neural Networks To Predict Of Liquidus Temperature In Hypoeutectic Al-Si Cast Alloys
JOURNAL OF APPLIED SCIENCE
Publication In Scopus CO-AUTHOR
2010
The Effects Of Nodularity Distribution On Vertical Configuration Mould For Automotive Ductile Iron Casting
ADVANCED MATERIAL RESEARCH
Publication In Scopus UTM FIRST AUTHOR
2010
Influence Of Gating System, Sand Grain Size, And Mould Coating On Microstructure And Mechanical Properties Of Thin-Wall Ductile Iron
JOURNAL OF IRON AND STEEL RESEARCH, INTERNATIONAL
Publication In Scopus UTM FIRST AUTHOR
2010
Effect Of Flask Vibration Time On Casting Integrity, Surface Penetration And Coating Inclusion In Lost Foam Casting Of AlãƒÂƒÃ‚ƒÃ‚¢Ã‚€ÂSi Alloy
AIP CONFERENCE PROCEEDINGS
Publication In Scopus UTM FIRST AUTHOR
2010
Design Sensitivity Analysis Of Squeeze Casting Process
THE 2ND INTERNATIONAL CONFERENCE ON COMPUTER AND AUTOMATION ENGINEERING, ICCAE
Publication In Scopus UTM FIRST AUTHOR
2010
-
Effect of Gating System and Mould Coating on Microstructure and Hardness of Thin Wall Ductile Iron
Conference Paper CO-AUTHOR
2009
Materials And Corrosion
Effect of ethanol as gasoline additive on vehicle fuel delivery system corrosion
Journal Article Non Citation-Indexed CO-AUTHOR
2009
Acta Metallurgica Sinica (English Letters)
Effect of Thermomechanical Treatment on Microstructure and Hardness Behavior of AZ63 Magnesium Alloy
Journal Article Non Citation-Indexed CO-AUTHOR
2009
Effect Of Pouring Temperature And Melt Treatment Of Al-Si Lm6 Alloy (Lfc) On Microstructure
Effect of pouring temperature and melt treatment of AL-Si LM6 Alloy (LFC) on microstructure
Conference Paper CO-AUTHOR
2009
Influence Of Heat Treatment On Properties Of Hot Isostatically Pressedturbine Blade Superalloy In738
Advanced Materials Research
Publication In Scopus CO-AUTHOR
2009
Characteristics Studies Of Collapsibility Of Abs Patterns Produced From Fdm For Investment Casting
Materials Research Innovation
Publication In Web Of Science CO-AUTHOR
2009
Effect Of Thermomechanical Treatment On Microstructure And Hardness Behaviour Of Az63 Magnesium Alloy
ACTA METALLURGICA SINICA-ENGLISH LETTERS
Publication In Web Of Science UTM FIRST AUTHOR
2009
Evaluation Of Abs Pstterns Produced From Fdm For Investment Casting Process
WIT Transactions on Engineering Sciences
Publication In Scopus CO-AUTHOR
2009

INTERIM REPORT - TRAINING AND DEVELOPMENT OF OPERATION MAINTENANCE SYSTEM (FOR SAJ HOLDINGS SDN BHD)
Clasified/Technical Report CO-AUTHOR
2007
Precision Casting Of A Magnesium-Base Alloy
FOUNDRYMAN
Publication In Scopus CORRESPONDING AUTHOR
1997

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name Grant Register No. IP Level IP Category
SURVEY ON ROAD BARRIERS AND HOARDINGS LY2020005429 NATIONAL COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
SAEED FARAHANY
EVALUATION OF THE EFFECT OF ADDITIVES AND THEIR INTERACTIONS ON SILICON MORPHOLOGY OF ALUMINIUM-SILICON-COPPER-MAGNESIUM CAST ALLOY BY THERMAL ANALYSIS
PHD GRADUATED CO-SUPERVISOR 2011
ALI AKHAVAN FARID
HIGH SPEED DRILLING OF AL-SI (A383) ALLOY USING CARBIDE TOOLS
PHD GRADUATED CO-SUPERVISOR 2011
MAJID KARIMIAN
EFFECTS OF PROCESS PARAMETERS ON LOST FOAM CASTING OF A1-SI (LM6) ALLOY
PHD GRADUATED CO-SUPERVISOR 2011
HASSAN JAFARI
IN-SITU MELTING ASSESSMENT OF AZ91D MAGNESIUM ALLOY INVESTMENT CASTING
PHD GRADUATED SUPERVISOR 2012
SHAHRIAR KOLEINI

PHD ON GOING SUPERVISOR
HAMID REZA BAKHSHESHI RAD
ENHANCEMENT OF CORROSION RESISTANCE OF MAGNESIUM BY ALLOYING, FLUORIDE TREATMENT AND NANO-HYDROXYAPATITE COATING FOR BIOMEDICAL APPLICATIONS
PHD GRADUATED SUPERVISOR 2013
AMIR FEREIDOUNI LOTFABADI
EFFECT OF ALLOYING AND HEAT TREATMENT ON CORROSION AND MECHANICAL PROPERTIES OF BIODEGRADABLE MAGNESIUM-ZINC ALLOY
PHD GRADUATED SUPERVISOR 2014
MOHD RASHIDI BIN MAAROF
EFFECT OF MAGNESIUM ADDITION ON THE MICROSTRUCTURE AND PROPERTIES OF DUCTILE NI-RESIST ALLOY USING IN-MOULD MAGNESIUM TREATMENT METHOD
PHD GRADUATED SUPERVISOR 2015
MAHTAB ASSADIAN
EFFECTS OF SODIUM HYDROXIDE AND POLYDOPAMINE PRE-TREATMENT AND CALCIUM PHOSPHATE COATING ON THE PROPERTIES OF BIODEGRADABLE MAGNESIUM
PHD GRADUATED SUPERVISOR 2015
ANDRIL ARAFAT SUHASRIL
HYDROXYAPATITE COATING ON STAINLESS STEEL 316L USING INVESTMENT CASTING TECHNIQUE
PHD GRADUATED SUPERVISOR 2015
TUTI YASMIN BINTI ALIAS
INHIBITION MOULD-METAL REACTION DURING CASTING OF PURE MAGNESIUM IN BLOCK INVESTMENT CASTING MOULD COATED WITH CALCIUM CARBONATE
PHD FAIL AND DISMISSAL SUPERVISOR
OMAR MOHD FAIZAN BIN MARWAH @ OMAR
ANALYSIS OF VARIOUS RAPID PROTOTYPING TECHNIQUES FOR INVESTMENT CASTING
PHD GRADUATED CO-SUPERVISOR 2016
AHMAD KAFRAWI NASUTION
PENETAP TULANG BESI-KELULI TAHAN KARAT TERBIODEGRASI MENGGUNAKAN KAEDAH KIMPALAN GESERAN
PHD GRADUATED CO-SUPERVISOR 2016
ASLINDA BINTI SALEH
EFFECTS OF FLUX APPLICATION AND MELTING PARAMETERS IN INVESTMENT CASTING OF PURE ALUMINIUM BY IN-SITU MELTING TECHNIQUE
PHD GRADUATED SUPERVISOR 2018
INTAN SYAQIRAH BINTI MOHD ZULKIFLI
CHARACTERISATION AND EVALUATION OF MAEROGEL FROM RICE HUSK ASH COATED ON INCONEL 625 SUPERALLOY FOR LOW PRESSURE TURBINE BLADE APPLICATION
PHD GRADUATED CO-SUPERVISOR 2018
HAMIDREZA GHANDVAR
EFFECT OF GADOLINIUM, ANTIMONY AND HOT EXTRUSION ON MICROSTRUCTURE EVOLUTION AND TENSILE PROPERTIES OF AL-15% MG2SI IN-SITU COMPOSITE
PHD GRADUATED SUPERVISOR 2018
ZULHELMI ALIF BIN ABDUL HALIM
RICE HUSK DERIVED SILICA AEROGEL IN UNSATURATED POLYESTER COMPOSITES
PHD GRADUATED CO-SUPERVISOR 2019
ABDELAISALAM ALI AL-BAKOOSH
MICROSTRUCTURE, MECHANICAL PROPERTIES AND CORROSION BEHAVIOR OF AA5083 ALUMINIUM ALLOY MODIFIED WITH RARE EARTH ELEMENTS
PHD GRADUATED SUPERVISOR 2020
MUHAMMAD HAFIZ BIN JAHARE
POROSITY AND MECHANICAL PROPERTIES ASSESSMENT OF A380 ALUMINIUM ALLOY USING SEMISOLID FORGING PROCESS
PHD GRADUATED SUPERVISOR 2022
HAINOL AKBAR BIN ZAMAN
HIGH SPEED END MILLING OF COBALT CHROMIUM MOLYBDENUM ALLOY USING CARBIDE TOOL UNDER VARIOUS COOLANT STRATEGIES
PHD GRADUATED CO-SUPERVISOR 2023
MOHD HAZWAN BIN HASSIM
PLASMA SPRAYED NANO-TITANIA COATING WITH ADDITION OF SILVER ON COBALT-CHROMIUM-MOLYBDENUM MEDICAL IMPLANT
PHD GRADUATED SUPERVISOR 2023
AZRINA BINTI ARSHAD
SURFACE MODIFICATION OF PLASMA SPRAYED DOUBLE CERAMIC LAYER (DCL) LANTHANUM ZIRCONATE THERMAL BARRIER COATING SYSTEM FOR HIGH TEMPERATURE APPLICATIONS
PHD ON GOING CO-SUPERVISOR
UMAR BELLO

PHD ON GOING SUPERVISOR
TAN CHEE WAYNE
SYNTHESIS AND CHARACTERISATION OF LITHIUM TITANATE || LITHIUM COBALT MANGANESE OXIDE ELECTROCHEMICAL CELL FOR ULTRA-FAST CHARGING BATTERY SYSTEM  
PHD ON GOING CO-SUPERVISOR
MOHAMAD RIDZUAN BIN MOHAMAD KAMAL
EFFECT OF HEAT TRANSFER MECHANISM ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MAGNESIUM ALLOY THROUGH COOLING SLOPE CASTING (CSC)
PHD ON GOING SUPERVISOR
AMIR FEREIDOUNI LOTFABADI

MASTER GRADUATED SUPERVISOR 2008
LEE CHUNG SIN

MASTER END OF STUDY PERIOD SUPERVISOR
WONG YUN HONG

MASTER GRADUATED SUPERVISOR 2009
LATIFAH BINTI ABDULLAH
PROPERTIES EVALUATION OF ORGANIC BINDER SYSTEM FOR CORE SAND PRODUCTION APPLICATION
MASTER GRADUATED SUPERVISOR 2010
SHAHRIAR KOLEINI

MASTER GRADUATED SUPERVISOR 2010
ALYAMI, SAAD RABIA S

MASTER GRADUATED SUPERVISOR 2010
ALI ASGHAR NIAKAN

MASTER GRADUATED SUPERVISOR 2010
RASOUL SADEGHI

MASTER GRADUATED SUPERVISOR 2010
AMIRREZA JAHANGIRI

MASTER GRADUATED SUPERVISOR 2010
MOHD ZULHAFIZ BIN MOHAMAD ZULKIFLI

MASTER GRADUATED SUPERVISOR 2011
SEEKAYAPATTEDA BHUPAL KUMAR

MASTER GRADUATED SUPERVISOR 2011
NUR FARAH BAZILAH BINTI WAKHI ANUAR

MASTER GRADUATED SUPERVISOR 2011
MEYSAM KESHAVARZ

MASTER GRADUATED CO-SUPERVISOR 2011
SAMIR SANI ABDULMALIK

MASTER GRADUATED SUPERVISOR 2011
MOHAMAD RIDZUAN BIN MOHAMAD KAMAL
EFFECT OF HEAT TRANSFER MECHANISM ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MAGNESIUM ALLOY THROUGH COOLING SLOPE CASTING (CSC)
MASTER GRADUATED SUPERVISOR 2011
AMIR MOHAMMAD ALI BEIK

MASTER GRADUATED SUPERVISOR 2012
MUSTAFA MUNEIM SABAR

MASTER GRADUATED SUPERVISOR 2012
SASAN VOSOUGH GHANBARI

MASTER GRADUATED SUPERVISOR 2012
SUBRAMANIAM BABY PRIYADHARSHINI

MASTER GRADUATED SUPERVISOR 2012
SEYEDMORTEZA GHAFFARISHAHRI

MASTER GRADUATED SUPERVISOR 2013
BABAK GHOLAMPOUR

MASTER GRADUATED SUPERVISOR 2013
MOHD SHAMSUL BIN HUSIN
OPTIMIZATION OF FRICTION STIR WELDING PROCESS FOR ALUMINIUM SHEET  
MASTER GRADUATED SUPERVISOR 2013
MOHAMMAD REZA YAVARI
EFFECT OF SURFACE ROUGHNESS AND TAPER ANGLE ON JUNCTION STRENGTH OF BIOMEDICAL IMPLANT
MASTER GRADUATED SUPERVISOR 2014
NURHAULIA BINTI RAZALI

MASTER GRADUATED CO-SUPERVISOR 2014
SOUDEH IRANMANESH
FABRICATION AND EVALUATION OF INVESTMENT CASTING PATTERNS FROM RAPID PROTOTYPING TECHNIQUES FOR PROXIMAL HUMERUS IMPLANT BY USING MICROWAVE.   
MASTER GRADUATED SUPERVISOR 2014
ALIREZA ESMAEILZADEH
DEVELOPING MILLING STRATEGY OF COBALT CHROMIUM MOLYBDENUM ALLOY FOR PROXIMAL HUMERUS HEAD IMPLANT.   
MASTER GRADUATED SUPERVISOR 2014
MUHAMMAD HAFIZ BIN JAHARE
ASSESSMENT OF POROSITY AND MECHANICAL PROPERTIES OF HELIUM IMPREGNATED ALUMINIUM HARD DISK PRODUCED BY SEMISOLID FORGING
MASTER GRADUATED SUPERVISOR 2015
BONG CHIAN YIT

MASTER GRADUATED SUPERVISOR 2015
MOHAMMAD AMIN BOZORGZADEH

MASTER GRADUATED SUPERVISOR 2016
SELVI A/P EZHENKOWAN
EFFECT OF NIOBIUM AND BORON ADDITION ON THE PROPERTIES OF IRON BASED MATERIALS FOR HARDFACING APPLICATIONS
MASTER GRADUATED SUPERVISOR 2016
SITI NUR FAEZAH BINTI ABDUL RAZAK

MASTER GRADUATED SUPERVISOR 2017
TAN CHEE WAYNE
SYNTHESIS AND CHARACTERISATION OF LITHIUM TITANATE || LITHIUM COBALT MANGANESE OXIDE ELECTROCHEMICAL CELL FOR ULTRA-FAST CHARGING BATTERY SYSTEM  
MASTER GRADUATED CO-SUPERVISOR 2017
NUR ALIA BINTI ROSLIN AZMY

MASTER GRADUATED SUPERVISOR 2019
ANG HOCK BENG AARON
EFFECTS OF CASTING AND MOULD COOLING TEMPERATURES ON THE WARPING PHENOMENON OF THICK-THIN SECTION ALUMINIUM HIGH-PRESSURE DIE-CASTING
MASTER GRADUATED SUPERVISOR 2019
AINATUL NABILAH BINTI JAMALUDIN

MASTER GRADUATED SUPERVISOR 2019
AHMED ABDULQADER AHMED AL-SAKKAF
DEVELOPMENT AND PROCESSING OF FE-MG BIODEGRADABLE ALLOYS FOR BIOMEDICAL APPLICATIONS
MASTER GRADUATED SUPERVISOR 2020
TAWFIQ BAYO MOHAMED ALGWAIRI

MASTER GRADUATED SUPERVISOR 2021
MOHAMMAD ZAHRAN ZAMIR BIN ALI

MASTER ON GOING SUPERVISOR
LIM ZHI XIAN
EFFECT OF PLASMA ARC CUTTING PROCESS PARAMETERS ON THE PROPERTIES OF S235 STEEL & 304 STAINLESS STEEL.
MASTER ON GOING SUPERVISOR