GRANT(PI & MEMBERS)

31

PUBLICATIONS

61

INDEXED PUBLICATION

29

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

NATIONAL GRANTS
2
UNIVERSITY FUND
3
TOTAL

Publications

INDEXED PUBLICATION
29
NON-INDEXED PUBLICATION
11
OTHERS PUBLICATION
21
TOTAL

Supervisions

DEGREE
0
MASTER
6
PHD
12
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
UTM-TRG/2 1.1: Drone Assisted Security Solutions with Docking Station
RUG OF UTM Translational Research@Campus
2023
Tanjung Langsat Port Security System V2.0
TLP TERMINAL SDN BHD Contract Research DTD
2022
A New Unified Strain-Displacement Compatibility Model for Photomechanics Analysis
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2022
A Mixed-mode Delamination Criterion for Moisture Induced Carbon/Epoxy Composites
RUG OF UTM UTM Fundamental Research
2022
Modelling Lubricant Film Formation Mechanism of Protic Ionic Liquid-based Polytetrafluoroethylene Grease for Electric Vehicles
RUG OF UTM UTM Fundamental Research
2022
Fabrication Of High-Precision Fully-Automated Agriculture Drone For Spraying Application - Tanidrone
INNOVATION AND COMMERCIALISATION CENTRE (ICC) Prototype Development Fund
2021
UTMIcon 3.2 : Development of high endurance and fully automated multirotor Unmanned Aerial System (mUAS)
RUG OF UTM UTM RA ICONIC GRANT
2020
A New Traction-Separation Law for Fibre Bridging of Composite Laminates
RUG OF UTM UTMShine
2020
ANALYSIS ON THE EFFECT OF VALVE STEM GEOMETRICAL PARAMETERS TO THE PRODUCTION OF VORTEX-INDUCED VIBRATION (VIV) IN A GOVERNOR VALVE SYSTEM FOR 3 MEGAWATT STEAM TURBINES.
RUG OF UTM UTM Encouragement Research
2019
MECHANICAL CHARACTERIZATION OF FRP COMPOSITE LAMINATES UNDER FATIGUE LOADING CONDITIONS
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2019
UTM-TDR 13.2 (T2): Metal Sponge-based material development for load bearing component of resilient contact system.
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 13.1 (T1): HYBRID NANOCOMPOSITE COATING FOR RESILIENT CONTACT SYSTEMS
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR13:INNOVATIVE MATERIALS FOR RESILIENT CONTACT SYSTEMS
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 13.3 (T2): HIGH PERFORMANCE PERFLUOROPOLYETHER-BASED GREASE LUBRICATION SYSTEM
RUG OF UTM UTM Transdiciplinary Research Grant
2018
A NEW THREE DIMENSIONAL FRACTURE CRITERION FOR MIXED-MODE DELAMINATION
RUG OF UTM Tier 1
2018
IMPACT CHARACTERISTICS OF NATURAL FIBRE WOVEN FABRICS IMPREGNATED WITH A SHEAR THICKENING FLUID (STF)
RUG OF UTM Tier 1
2017
Innovative teaching and learning strategies in open modelling and simulation environment for student-centered engineering education / InMotion
EUROPEAN COMMISSION Contract
2016
DAMAGE ASSESSMENT OF LAMINATED COMPOSITES BY DIGITAL IMAGE CORRELATION TECHNIQUE
RUG OF UTM Matching Grant
2016
investigation of eco-composite materials energy dissipation behavior
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2015
ADVANCED TESTING OF LAMINATED COMPOSITES FOR AEROSPACE PARTS AND ASSEMBLIES
AEROSPACE MALAYSIA INNOVATION CENTRE Contract
2015
Investigation of recycling and re-manufacturing process parameters of highly-aligned longdiscontinuous aerospace carbon fibre composites
MINISTRY OF EDUCATION Networking Grant
2015
Mode III Participation in Mixed-mode Delamination of Composite Laminates
RUG OF UTM Encouragement Grant
2015
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF NATURAL FIBER COMPOSITES UNDER LOW VELOCITY IMPACT AND CRUSHING
RUG OF UTM Potential Academic Staff
2015
Moisture absorption characteristics in fibre reinforced composite laminates
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2014

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Notch-Sensitivity Of Hybrid Recycled Carbon Fiber Composites
THE ENGINEER STORY
Journal Article Non Citation-Indexed FIRST UTM CORRESPONDING AUTHOR
2024
Tensile Behaviors And Stress Concentration Of Hybrid Glass And Recycled Carbon Fiber Composites
7TH SOUTHEAST ASIA WORKSHOP ON AEROSPACE ENGINEERING (SAWAE 2023)
Conference Paper FIRST UTM CORRESPONDING AUTHOR
2023
Flexural Behaviour Of Glass/Flax Hybrid Composite For Vehicles Structural Applications
REINFORCED AND POROUS MATERIALS FOR STRUCTURAL APPLICATIONS
Book Chapter FIRST UTM CORRESPONDING AUTHOR
2023
Pesawat Ringan Lebih Sensetif Aliran Gelora.
KOSMO AHAD [WAWANCARA] PANORAMA
Article In Mass Media UTM FIRST AUTHOR
2023
Investigation Of Tensile Pseudo-Ductility Behavior Of Flax Fiber In Hybrid Composites Laminates
THE 7TH SOUTHEAST ASIA ON AEROSPACE ENGINEERING (SAWAE 2023)
Conference Paper FIRST UTM CORRESPONDING AUTHOR
2023
Experimental Flutter Analysis Of Composite Wings With Bending-Torsion Coupling
3RD INTERNATIONAL SEMINAR ON AERONAUTICS AND ENERGY (ISAE) 2023
Conference Paper FIRST UTM CORRESPONDING AUTHOR
2023
Stress Concentration Factor Of Notched Hybrid Recycled Carbon Composite
3RD INTERNATIONAL SEMINAR ON AERONAUTICS AND ENERGY 2023 (ISAE) 2023
Conference Paper FIRST UTM CORRESPONDING AUTHOR
2023
A Numerical Algorithm For Grease-Lubricated Point Contact At Different Regimes Of Lubrication
JURNAL TRIBOLOGI
Publication In Web Of Science CO-AUTHOR
2022
Experimental Investigation Of The Axial Crushing Response Of Flax/Glass Eco-Hybrid Self-Supporting Web Composites
FIBERS
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Preliminary Structural Design Of Coreless Spoiler By Topological Optimization
PROCESSES
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Tensile Characterizations Of Oil Palm Empty Fruit Bunch (Opefb) Fibres Reinforced Composites In Various Epoxy/Fibre Fractions
BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY
Publication In Web Of Science CORRESPONDING AUTHOR
2022
Flatwise And Edgewise Compression Properties Of Composite Pla Core Fabricated Via Additive Manufacturing Technique
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR
2022
Displacement Rate Effects On Mixed-Mode I/Ii Delamination Of Laminated Carbon/Epoxy Composites
POLYMER TESTING
Publication In Web Of Science CO-AUTHOR
2022
Preliminary Structural Design Of Coreless Spoiler By Topological Optimization
1ST INTERNATIONAL SEMINAR ON AERONAUTICS AND ENERGY 2021
Conference Paper CORRESPONDING AUTHOR
2021

STRENGTHENING GOVERNMENT-UNIVERSITY-INDUSTRY AND COMMUNITY COLLABORATION
Pelaporan / Penerbitan Khusus (Rancangan Malaysia, Statistik Kebangsaan) CO-AUTHOR
2021
Experimental And Numerical Investigation Of Humid Ageing Effects On Cfrp Laminates Crashworthiness Behaviours
INTERNATIONAL JOURNAL OF CRASHWORTHINESS
Publication In Web Of Science CORRESPONDING AUTHOR
2021
Displacement Rate Effects On The Mode Ii Shear Delamination Behavior Of Carbon Fiber/Epoxy Composites
POLYMERS
Publication In Web Of Science CO-AUTHOR
2021
Strain Rates Effect Of Dynamic Compression Properties Of E-Glass/Jute Composite
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES
Publication In Web Of Science CO-AUTHOR
2020
Coreless Spoiler Structural Design And Analysisv
AERONAUTICAL ANALYSIS VIA EXPERIMENTAL AND COMPUTATIONAL APPROACHES
Publication In Web Of Science CORRESPONDING AUTHOR
2020
Flexural Behaviour Of Quasi-Isotropic Quasi-Homogeneous Woven Glass/Polyester Composite Laminates
LIGHTWEIGHT MATERIALS FOR STRUCTURAL APPLICATIONS
Publication In Web Of Science CO-AUTHOR
2020
Effective Action Leads To Positive Impacts
LEADERSHIP SYMPOSIUM 2020
Conference Paper INDIVIDUAL AUTHOR
2020
Mode I Delamination Behaviour Of Carbon/Epoxy Composite At Different Displacement Rates
COMPOSITES PART B: ENGINEERING
Publication In Web Of Science CO-AUTHOR
2019
Experimental Investigation Of The Axial Crushing Response Of Flax/Glass Eco-Hybrid Composites For Fuselage Subfloor Application
PROCEEDINGS OF NUMERICAL ANALYSIS IN ENGINEERING 2019 / MECHANICAL ENGINEERING MULTI-CONFERENCE (MEMC) 2019
Proceedings CORRESPONDING AUTHOR
2019
Dynamic Compression Properties Of E-Glass/Basalt And E-Glass/Flax Using Shpb
THE 6TH MECHANICAL ENGINEERING RESEARCH DAY (MERD'19)
Proceedings CO-AUTHOR
2019
A Review On The Interfacial Characteristics Of Natural Fibre Reinforced Polymer Composites
INTERFACES IN PARTICLE AND FIBRE REINFORCED COMPOSITES
Book Chapter CO-AUTHOR
2019
Humid Ageing Effects On The Crashworthiness Behaviours Of Cfrp Laminates
SOUTHEAST ASIA WORKSHOP ON AEROSCPACE ENGINEERING 2019
Conference Paper CORRESPONDING AUTHOR
2019
Aligned Discontinuous Carbon Fibre Tows In Hybrid Composites And Their Tensile Behaviour: An Experimental Study
JOURNAL OF COMPOSITE MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR
2019
Thermo-Mechanical Characterisation And Modelling Of Gfrp Laminated Aluminium
COMPOSITES PART B: ENGINEERING
Publication In Web Of Science CO-AUTHOR
2019
Dynamic Compression Properties Of E-Glass/Basalt And E-Glass/Flax Using Shpb
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2019 (MERD'19)
Publication In Web Of Science CO-AUTHOR
2019
Tensile Behaviour Of Hybrid Composites Between Glass And Short Carbon Fibres
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2019
Effect Of Fiber Misalignment On Tensile Response Of Unidirectional Cfrp Composite Lamina
JOURNAL OF ADVANCED RESEARCH IN APPLIED SCIENCES AND ENGINEERING TECHNOLOGY
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2018
Indentation And Low Velocity Impact Properties Of Woven E-Glass Hybridization With Basalt, Jute And Flax Toughened Epoxy Composites
3RD INTERNATIONAL CONFERENCE ON POWER GENERATION SYSTEMS AND RENEWABLE ENERGY TECHNOLOGIES (PGSRET 2017);JOHOR BAHRU, MALAYSIA; 4-6 APRIL 2017
Publication In Scopus CORRESPONDING AUTHOR
2018
Numerical Modelling Strategies For Composite Structures Crashworthiness: A Review
JOURNAL OF ADVANCED RESEARCH IN MATERIALS SCIENCE
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2018
Oblique Impact Behavior Of Unidirectional Natural Fiber Reinforced Composites
INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES
Publication In Web Of Science CO-AUTHOR
2018
Mode I And Mode Ii Delamination Of A Chopped Strand Mat E-Glass Reinforced Vinyl Ester Composite
PLASTICS, RUBBER AND COMPOSITES
Publication In Web Of Science CO-AUTHOR
2018
Crashworthiness Behavior Of Eco-Hybrid Composite For Fuselage Subfloor Application
3RD SOUTH EAST ASIA WORKSHOP ON AEROSPACE ENGINEERING
Conference Paper CORRESPONDING AUTHOR
2018
Experimental Investigation Of Tensile Properties Of Eco-Composite Laminates
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2018
Impact Resistance Of Short Bamboo Fibre Reinforced Polyester Concretes
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS
Publication In Web Of Science CO-AUTHOR
2017
Mechanical Properties Of Bamboo And Bamboo Composites: A Review
JOURNAL OF ADVANCED RESEARCH IN MATERIALS SCIENCE
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2017
A Review On Stab And Spike Resistance Performance Of Shear Thickening Fluids (Stf) Impregnated Fabrics
12TH INTERNATIONAL CONFERENCE ON LATEST TRENDS IN ENGINEERING AND TECHNOLOGY (ICLTET'2017)
Proceedings CO-AUTHOR
2017
Numerical Simulation Methodology For Mode Ii Delamination Of Quasi-Isotropic Quasi-Homogeneous Composite Laminates
JOURNAL OF COMPOSITE MATERIALS
Publication In Web Of Science CO-AUTHOR
2017
Numerical Simulations Of Mixed-Mode Ii+Iii Delamination In Carbon/Epoxy Composite Laminate
COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE
Publication In Scopus CO-AUTHOR
2017
Cohesive Zone Modelling Of Mode Iii Delamination Using The Edge Crack Torsion Test
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES
Publication In Scopus CO-AUTHOR
2017
Effect Of Layering Pattern On Mechanical And Water Absorption Properties Of Glass/Flax Reinforced Epoxy
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2017
Crack Length Dependence Of Mode Iii Delamination Using Edge Crack Torsion Test
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH
Publication In Scopus CO-AUTHOR
2017
The Influence Of Different Glass/Polyester Laminates Designs Under High Localised Point Loading
STRUCTURAL COMPOSITES: MECHANICAL PROPERTIES AND BEHAVIOUR
Book Chapter CORRESPONDING AUTHOR
2017
Effect Of Stacking Sequence On The Tensile And Flexural Properties Of Glass Fibre Epoxy Composites Hybridized With Basalt, Flax Or Jute Fibres
MATERIAL SCIENCE AND ENGINEERING WITH ADVANCED RESEARCH
Journal Article Non Citation-Indexed CO-AUTHOR
2016
Crashworthiness Behavior Of Pure Bamboo Plate
1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016
Proceedings CORRESPONDING AUTHOR
2016
Compressive Properties Of Hawaiian Gold Timber Bamboo Under Different Conditions
JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2016
Compressive Behaviour Of Bamboo Plate
ENGINEERING MATERIALS FOR SPECIFIC APPLICATION: MECHANICAL PROPERTIES
Book Chapter CORRESPONDING AUTHOR
2016
Mechanical And Physical Properties Of Glass/Flax Reinforced Epoxy On Tensile, Flexural And Water Absorption
5TH INTERNATIONAL CONFERENCE ON DESIGN AND CONCURRENT ENGINEERING (IDECON 2016)
Conference Paper CO-AUTHOR
2016
An Overview Of Using Unmanned Aerial Vehicle As An Alternative Solution For Cloud Seeding Process
JOURNAL OF TRANSPORT SYSTEM ENGINEERING
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2016
Structural Design Of Uav Semi-Monoque Composite Wing
JOURNAL OF TRANSPORT SYSTEM ENGINEERING
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2016
Thickness-Dependent Non-Fickian Moisture Absorption In Epoxy Molding Compounds
MICROELECTRONICS RELIABILITY
Publication In Web Of Science CO-AUTHOR
2016
Mode Ii Delamination Of Chopped Strand Mat E-Glass Reinforced Vinyl Ester Composite
1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016
Proceedings CO-AUTHOR
2016
Characterisation Of Moisture Absorption Effects On The Strength Of Composite Materials
ADVANCED MATERIALS RESEARCH
Proceedings CO-AUTHOR
2015
Experimental Investigation Of Pure Bamboo Plate Under Quasi-Static Indentation Test
JOURNAL OF TRANSPORT SYSTEM ENGINEERING
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2015
Post-Impact Investigation Of Cfrp Laminated Plate
JURNAL TEKNOLOGI
Publication In Scopus UTM FIRST AUTHOR
2014
Finite Element Simulation Of 0 Degrees/90 Degrees Cfrp Laminated Plates Subjected To Crushing Using A Free-Face-Crushing Concept
COMPOSITES PART A- APPLIED SCIENCE AND MANUFACTURING
Publication In Web Of Science UTM FIRST AUTHOR
2014
Experimental Investigation On Mean Crushing Stress Characterization Of Carbon-Epoxy Plies Under Compressive Crushing Mode
COMPOSITE STRUCTURES
Publication In Web Of Science UTM FIRST AUTHOR
2013
Numerical Modeling Of [0â°/90â°] Cfrp Laminated Plates Under Low Velocity Crushing
8TH ASIAN-AUSTRALASIAN CONFERENCE ON COMPOSITE MATERIALS 2012
Publication In Scopus UTM FIRST AUTHOR
2012

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name Grant Register No. IP Level IP Category
INNOVATIVE MATERIALS FOR RESILIENT CONTACT SYSTEMS LY2018006417 NATIONAL COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
MUHAMAD SHAHIRUL BIN MAT JUSOH
STATIC AND DYNAMIC BEHAVIOUR OF NATURAL FIBRES HYBRID COMPOSITES
PHD GRADUATED CO-SUPERVISOR 2018
AZISYAHIRAH BINTI AZIZAN
MESOSCALE LAMINA FATIGUE DAMAGE MODEL FOR FIBER-REINFORCED POLYMER COMPOSITE LAMINATES
PHD GRADUATED CO-SUPERVISOR 2021
SYED MOHD SAIFUL AZWAN BIN SYED HAMZAH
STRENGTH AND ENERGY ABSORPTION CHARACTERISTICS OF POLYMER PIN-REINFORCED FOAM CORE SANDWICH PANEL
PHD GRADUATED CO-SUPERVISOR 2022
NURUL ZUBAIDAH BINTI ZAKI
MATHEMATICAL MODELLING OF COMPOSITE WING FLUTTER WITH THE INCLUSION OF AEROELASTIC BENDING-TORSION COUPLING
PHD GRADUATED SUPERVISOR 2023
NUR AISYA AFFRINA BINTI MOHAMED ARIFFIN
A NUMERICAL MODEL FOR PREDICTING FRICTION IN A GREASE-LUBRICATED BEARING FOR ELECTRIC VEHICLE MOTORS
PHD ON GOING CO-SUPERVISOR
SYAZWAN BIN AHMAD RASHIDI
DEVELOPMENT OF MESOSCALE DAMAGE MODEL FOR NON-CRIMP FABRIC COMPOSITES
PHD ON GOING SUPERVISOR
ABDELMUNEM BUSHRA ABDALLA AHMED
ANALYTICAL MODEL OF POLYMER COMPOSITE LAMINATE ON DIFFERENTSTRAIN RATES
PHD ON GOING SUPERVISOR
MUHAMMAD IRFAN NAUFAL BIN MOHD ZAKI
FRACTURE TOUGHNESS BEHAVIORS OF RECYCLED CARBON IN HYBRID COMPOSITES UNDER MIXED-MODE LOADINGS
PHD ON GOING SUPERVISOR
NG WEI KUAN
EFFECTS OF STACKING SEQUENCE ON MECHANICAL, FRACTURE AND IMPACT PROPERTIES OF HYBRID BAMBOO/GLASS FIBER COMPOSITES
PHD ON GOING SUPERVISOR
LOW KEAN ONG
DISPLACEMENT RATE DEPENDENCE OF THE DELAMINATION BEHAVIOUR OF CARBON/EPOXY COMPOSITE LAMINATES
PHD ON GOING SUPERVISOR
OMAR ABDULHASAN LAFTA
LATERAL CRUSHING OF AUXETIC STRUCTURE TUBE UNDER IMPACT LOADING    
PHD ON GOING CO-SUPERVISOR
MOHAMAD YUSUF BIN SALIM
FLEXURAL PROPERTIES AND LOW VELOCITY IMPACT RESPONSE OF HYBRID BASALT STAINLESS STEEL WIRE MESH REINFORCED COMPOSITES  
PHD ON GOING CO-SUPERVISOR
MOHAMAD YUSUF BIN SALIM
FLEXURAL PROPERTIES AND LOW VELOCITY IMPACT RESPONSE OF HYBRID BASALT STAINLESS STEEL WIRE MESH REINFORCED COMPOSITES  
MASTER ON GOING CO-SUPERVISOR
MUHAMMAD BIN ABDULLAH

MASTER GRADUATED SUPERVISOR 2018
ABRAR BIN MOHD NASIR

MASTER GRADUATED SUPERVISOR 2020
NUR AISYA AFFRINA BINTI MOHAMED ARIFFIN
A NUMERICAL MODEL FOR PREDICTING FRICTION IN A GREASE-LUBRICATED BEARING FOR ELECTRIC VEHICLE MOTORS
MASTER ON GOING CO-SUPERVISOR
MONICA TANDLE

MASTER GRADUATED SUPERVISOR 2023
TEAH ANG TOON YEW
ORIGINAL PROPOSED TOPIC: EFFECTS OF FLOW CONTROL ANALYSIS ON UTM-SACCON UCAV CONFIGURATIONS  REVISED PROPOSED TOPIC: DETAIL ANALYSIS OF THE INTERACTION BETWEEN INNER AND PRIMARY VORTEX ABOVE BLUNT LEADING-EDGE DELTA WING.  
MASTER ON GOING CO-SUPERVISOR