GRANT(PI & MEMBERS)

30

PUBLICATIONS

58

INDEXED PUBLICATION

20

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

NATIONAL GRANTS
1
UNIVERSITY FUND
5
TOTAL

Publications

INDEXED PUBLICATION
20
NON-INDEXED PUBLICATION
11
OTHERS PUBLICATION
27
TOTAL

Supervisions

DEGREE
0
MASTER
14
PHD
9
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
Design and Development of in Situ Automatic Water Quality Monitoring System: A Data Validation and Fault Detection
KURITA WATER AND ENVIRONMENT FOUNDATION International Grant
2023
UTM-TRG/2 1.1: Drone Assisted Security Solutions with Docking Station
RUG OF UTM Translational Research@Campus
2023
CORRELATION BETWEEN ROTORBLADE AND PMG CHARACTERISTICS FOR A MATCHING UPWIND TURBINE SYSTEM
RUG OF UTM UTM Fundamental Research
2022
hydrodynamic modelling of underwater unmanned vehicle propulsion with meshed fish trap in waves
RUG OF UTM UTM Fundamental Research
2022
Pressure distribution and tribological performances of Trimethylolpropane (TMP) with reduced graphene oxide (rGO) additive biolubricant in various textured journal bearing.
RUG OF UTM UTM Fundamental Research
2022
Rotor blade design, fabrication and experimental validation for heavy lifting hexa-rotor UAV
RUG OF UTM UTM Encouragement Research
2021
A Highly Reliable and Effective Low Wind-Speed Horizontal Axis Wind Turbine
MINISTRY OF EDUCATION Prototype Development Research Grant Scheme
2020
EXPERIMENTAL STUDY ON FRICTION AND WEAR PROPERTIES OF SPECIALTY NATURAL RUBBER TYRE TREAD COMPOUND USING PIN ON DISK TRIBOTESTER-ON-DISK TRIBOMETER
RUG OF UTM UTM Fundamental Research
2020
RELATIONSHIP OF A BLDC MOTOR ROTOR SYSTEM TO THE PROPELLER ROTATION SPEED AND LIFTING FORCE
RUG OF UTM UTM Fundamental Research
2020
KTP-NMG 2019: AUTOMATION IN GARMENT MANUFACTURING TOWARDS INDUSTRIAL REVOLUTION (IR 4.0) AND STEM EDUCATION.
RUG OF UTM Business Entity
2019
UTM-TDR 18.4 (T1) : Continuous Domains of Low Temperature Graphene Growth on transition metal catalysts.
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 18.1 (T2): Energy Recovery and Power Generation from Variable Refrigerant Volume Unit by Convergent-Shrouded Wind Turbine Generator
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 18.2 (T1): Metal Doped Crystalline Carbon Nitride for Hydrogen Evolution via Photocatalytic Water Splitting
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR24.3(T2):DEVELOPMENT OF SMALL SCALE FLOATING OFFSHORE WIND TURBINE FOR LOW-SPEED APPLICATION
RUG OF UTM UTM Transdiciplinary Research Grant
2018
UTM-TDR 18 : A SUSTAINABLE CO-GENERATION POWER SUPPLY
RUG OF UTM UTM Transdiciplinary Research Grant
2018
Effective Low Wind Speed Horizontal Axis Wind Turbine
MINISTRY OF EDUCATION Prototype Development Fund
2018
DEVELOPMENT OF ARAMIDE NANOFIBERS FILLED POLY-L-LACTIC ACID (PLLA)/POLYURETHANE (PU) FOR TISSUE ENGINEERING SCAFFOLD
RUG OF UTM Tier 1
2018
BEHAVIOUR OF INTERMETALLIC COMPOUNDS FORMED BETWEEN COPPER INTERCONNECTION FILLER, NICKEL UNDERLAYER, AND SILICON WAFER FOR THROUGH-SILICON VIA (TSV) APPLICATION
RUG OF UTM Tier 1
2018
Three-Dimensional space algorithm for obstacle detection and recognition
RUG OF UTM Tier 1
2018
IMPROVING THE CLIMATIC RATING IN A CAR CABIN
RUG OF UTM Tier 1
2018
REFLECTION OF ACOUSTIC WAVE IN REAL ATMOSPHERE FOR HYPERSONIC BOUNDARY LAYER CONTROL
RUG OF UTM Tier 1
2016
EFFECTS OF HEAT GENERATION ON AIRBORNE PARTICLES TRANSPORT IN A HOSPITAL OPERATING ROOM
RUG OF UTM Tier 2
2016
EFFECTS OF REGENERATION AIR HUMIDITY ON MOISTURE REMOVAL CAPACITY OF A SOLID DESICCANT WHEEL SYSTEM
RUG OF UTM Tier 1
2016
POWER GENERATION BY SMALL-SCALE WIND TURBINE
RUG OF UTM Encouragement Grant
2015
DEPOSITION OF CU INTERCONNECTION MATERIALS FOR THROUGH-SILICON VIAS (TSV) APPLICATION BY ELECTROLESS PLATING
RUG OF UTM Encouragement Grant
2014

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Anti-Oxidation Additives In Palm Oil Lubricant Towards A Sustainable Lubrication Approach
THE ENGINEER STORY
Article In Mass Media CO-AUTHOR
2023
Installation Of Co-Generation Unit Based On Neda Scheme In Mersing Johor
DISTRIBUTION NETWORK ANALYSIS AND THE IMPACTS OF DISTRIBUTION GENERATION INSTALLATION ON THE DISTRIBUTION NETWORK
Book Chapter CO-AUTHOR
2023
Utm Rintis Reka Bentuk Teknologi Bilah Turbin Angin Untuk Kelajuan Angin Rendah
UTM RINTIS REKA BENTUK TEKNOLOGI BILAH TURBIN ANGIN UNTUK KELAJUAN ANGIN RENDAH
Article In Mass Media INDIVIDUAL AUTHOR
2023
Characterization Of Fluid Flow Through Porous Media
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR
2022
Numerical Study Of Shrouded Diffuser Wind Turbine
INTERNATIONAL JOURNAL OF ENGINEERING ADVANCED RESEARCH
Journal Article Non Citation-Indexed UTM FIRST AUTHOR
2022
The Tribofilm Formation Of Mos2 Nanolubricant In Boundary Lubrication Regime
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR
2022
Performance Analysis Of Highway Wind Turbine Enhanced With Wind Guide Vanes Using The Taguchi Method
CFD LETTERS
Publication In Scopus CORRESPONDING AUTHOR
2021
Seawater As New Renewable Energy Resource: Material Characterization Of The Cell Electrodes
LECTURE NOTES IN MECHANICAL ENGINEERING : RECENT TRENDS IN MANUFACTURING AND MATERIALS TOWARDS INDUSTRY 4.0
Publication In Scopus CO-AUTHOR
2021
Study On The Potentiality Of Power Generation From Exhaust Air Energy Recovery Wind Turbine: A Review
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus UTM FIRST AUTHOR
2021
Evaluation Of The Convolutional Neural Network’S Performance In Classifying Steel Strip’S Surface Defects
RECENT TRENDS IN MECHATRONICS TOWARDS INDUSTRY 4.0 (SELECTED ARTICLES FROM IM3F 2020, MALAYSIA)
Publication In Scopus CO-AUTHOR
2021
Evaluation Of The Convolutional Neural Network'S Performance In Classifying Steel Strips Surface Defects
INNOVATIVE MANUFACTURING, MECHATRONICS & MATERIALS FORUM 2020
Conference Paper CO-AUTHOR
2020
Design And Development Of Heavy-Lift Hexacopter For Heavy Payload
TRANSPORT SYSTEM ENGINEERING
Journal Article Non Citation-Indexed CO-AUTHOR
2020
The Effect Of Flow Variations To Vibration Tendency In A Hydraulic Manifold
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2020
The Evaluation Of Drag And Lift Force Of Groove Cylinder In Wind Tunnel
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR
2020
Urban Intelligent Navigator For Drone Usingconvolutional Neural Network (Cnn)
SMART COMMUNICATIONS AND NETWORKING (SMARTNETS)
Conference Paper CO-AUTHOR
2019
Deep Reinforcement Learning Based Traffic Control System
INTERNATIONAL JOINT CONFERENCE ON ADVANCES IN COMPUTING, COMMUNICATION AND INFORMATION TECHNOLOGY
Conference Paper CO-AUTHOR
2019
Performance Augmentation Of Betz Horizontal Axis Wind Turbine By Integrating The Brim Typed Diffuser Shroud
THE 4TH INTERNATIONAL SYMPOSIUM ON FLUID MECHANICS AND THERMAL SCIENCES -CONFERENCE PROCEEDINGS ENGINEERING SCIENCE AND TECHNOLOGY
Proceedings CORRESPONDING AUTHOR
2019
Cfd Investigation On The Jet-Engine Inspired Wind Turbine
THE 4TH INTERNATIONAL SYMPOSIUM ON FLUID MECHANICS AND THERMAL SCIENCES - CONFERENCE PROCEEDINGS ENGINEERING SCIENCE AND TECHNOLOGY
Proceedings CORRESPONDING AUTHOR
2019
Effects Of Staggered Array Of Cubical Obstacles On Near-Ground Wind Environment And Air Quality
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR
2019
Performance Of Polymeric Viscosity Improver As Bio- Lubricant Additives
INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY
Publication In Scopus CO-AUTHOR
2019
Evaluation Of Lift And Drag Force Of Outward Dimple Cylinder Using Wind Tunnel
CFD LETTERS
Publication In Scopus CO-AUTHOR
2019
Numerical Investigation Of Wake Energy Induced By Cruising Passenger Vehicles On Highway
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus UTM FIRST AUTHOR
2019
Deep Reinforcement Learning Based Traffic Control System
INTERNATIONAL JOURNAL OF ADVANCES IN COMPUTER SCIENCE AND ITS APPLICATIONS
Journal Article Non Citation-Indexed CO-AUTHOR
2019
Numerical Investigation Of Drag Force On Micro-Sized Magnetic Beads In Microchannel With Chamber Design
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR
2019
Evaluation Of Kapok Fiber And Gypsum Mixture To Improve Fire Resistance
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR
2019
Traffic Light Dispersion Control Based On Deep Reinforcement Learning
JOURNAL OF TRANSPORT SYSTEM ENGINEERING
Journal Article Non Citation-Indexed CO-AUTHOR
2019
Arduino-Based Data Logger For Driving Comfort Analysis
2019 2ND INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING (ICAE)
Publication In Scopus CO-AUTHOR
2019
A Novel Passenger Vehicles Wake Energy Reuse Method To Optimize The Guide Vane For Highway Micro Savonius Wind Turbine
7TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE AND HUMANITIES (IGCESH)2018
Proceedings CORRESPONDING AUTHOR
2018
Rfid Enabled Automatic Parking System
INTELLIGENT CONTROL AND AUTOMATION SYMPOSIUM (ICAS 2018)
Proceedings CO-AUTHOR
2018
Development Of Indoor Automatic Parking System Model With Real-Time Database
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed CO-AUTHOR
2018
Evaluation Of Lift And Drag Force Of Outward Dimple Cylinder Using Wind Tunnel
FMTS
Conference Paper CO-AUTHOR
2018
Correlation Between Particulate Matter And Microbial Counts In Hospital Operating Rooms
ADVANCES IN ENVIRONMENTAL BIOLOGY
Journal Article Non Citation-Indexed CO-AUTHOR
2018
Numerical Investigation Of Wake Energy Induced By Cruising Passenger Vehicles On Highway
THE SECOND INTERNATIONAL SYMPOSIUM ON FLUID MECHANICS AND THERMAL SCIENCES (2ND IS-FMTS 2018)
Conference Paper CORRESPONDING AUTHOR
2018
Comparison Of Turbulence Models In Solving The Airflow In A Unidirectional Airflow Operating Room
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING & TECHNOLOGY
Journal Article Non Citation-Indexed CO-AUTHOR
2017
Effect Of Air Change Rate On Airborne Particles Concentration In Hospital Operating Rooms
JOURNAL OF ADVANCED RESEARCH IN ENGINEERING & TECHNOLOGY
Journal Article Non Citation-Indexed CO-AUTHOR
2017
Cleanroom Performance Testing In Hospital'S Vascular Interventional Radiology Laboratory
PROCEEDINGS OF IASTEM INTERNATIONAL CONFERENCE
Proceedings CO-AUTHOR
2017
Effect Of Air Change Rate On Airborne Particles Concentration In Hospital Operating Rooms
PROCEEDING OF THE IAARHIES INTERNATIONAL CONFERENCE 23-24 AUGUST 2017, LONDON, UK
Proceedings CO-AUTHOR
2017
An Intelligent Material Handling System Using Raspberry Pi For Industrial Automation And Control
2ND MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING
Proceedings CO-AUTHOR
2017
Cfd Prediction Of Shroud Model Effect On Horizontal Axis Wind Turbine Performance Under Low Wind Speed Condition
PROCEEDINGS OF THE 9TH INTERNATIONAL MEETING ON ADVANCES IN THEMOFLUIDS
Proceedings CORRESPONDING AUTHOR
2017
Comparison Of Turbulence Models In Solving The Airflow In A Unidirectional Airflow Operating Room
PROCEEDING OF THE IAARHIES INTERNATIONAL CONFERENCE 23-24 AUGUST 2017, LONDON, UK
Proceedings CO-AUTHOR
2017
Time Of Flight Improvement Of A Counter Rotating Drone
THE PROCEEDING OF MCME 2017/2ND MULTIDISCIPLINARY OF MECHANICAL ENGINEERING 2017
Proceedings CORRESPONDING AUTHOR
2017
Effects Of Surgical Lamp And Staff Surface Temperatures On Particles Distribution In A Hospital Operating Room
PROCEEDINGS OF THE 9TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2017 (IMAT2017)
Proceedings CO-AUTHOR
2017
Air Temperature, Airflow Velocity And Carbon Dioxide Dispersal Inside A Domestic Kitchen Space
PROCEEDINGS OF THE 9TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2017 (IMAT2017)
Proceedings CO-AUTHOR
2017
Clean Room Performance Testing In Hospital'S Vascular Interventional Radiology Laboratory
INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING
Journal Article Non Citation-Indexed CO-AUTHOR
2017
Performance Assessment Of A Solid Desiccant Air Dehumidifier
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2016
Effectiveness Of Blade Tip On Low Speed Horizontal Axis Wind Turbine Performance
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR
2016
Reflection Of Acoustic Wave In Real Atmosphere For Hypersonic Boundary Layer Control
8TH AIAA FLOW CONTROL CONFERENCE
Publication In Scopus UTM FIRST AUTHOR
2016
Effects Of Surgeon Movement On Particle Settlement In A Hospital'S Operating Room.
INTERNATIONAL CONFERENCE ON “ENGINEERING & TECHNOLOGY, COMPUTER, BASIC AND APPLIED SCIENCES” (ECBA-2016), MELBOURNE, AUSTRALIA
Conference Paper CO-AUTHOR
2016
Experimental Study On Performance Of Low Speed Wind Turbine For Application In Malaysia
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2016
Numerical Investigation Of Vortex Formation Effect On Horizontal Axis Wind Turbine Performance In Low Wind Speed Condition
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2016
Wall Pressure Fluctuations In Hypersonic Boundary Layer: A Strategy To Design Passive Noise Control Systems
22ND AIAA/CEAS AEROACOUSTICS CONFERENCE, 2016
Publication In Scopus UTM FIRST AUTHOR
2016
Correlation Between Particulate Matter And Microbial Counts In Hospital Operating Rooms
IPN CONFERENCES OSAKA 2016
Conference Paper CO-AUTHOR
2016
Field Measurement Of Cleanroom Parameters In Hospital'S Vascular Interventional Radiology Laboratory
PROCEEDINGS OF THE 6TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE & HUMANITIES (IGCESH 2016)
Proceedings CO-AUTHOR
2016
Performance Enhancement Of Tilt-Body Micro Air Vehicle By Use Of Orthotropic Laminated Proprotors
APPLIED MECHANICS AND MATERIALS
Proceedings CORRESPONDING AUTHOR
2016
A Systematic Assessment Of Cleanroom Performance In Hospital'S Operating Room
PROCEEDINGS OF 9TH & 10TH IAARHIES INTERNATIONAL CONFERENCES
Proceedings CO-AUTHOR
2016
Design And Validation Of Optimal Low Speed Horizontal Axis Wind Turbine Blades For Application In Malaysia
1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING
Proceedings UTM FIRST AUTHOR
2016
Numerical Investigation Of A Proof-Of-Concept Rotor In Martian Atmosphere
PROCEEDINGS OF THE INTERNATIONAL MICRO AIR VEHICLE CONFERENCE AND COMPETITION 2016 (IMAV 2016)
Proceedings UTM FIRST AUTHOR
2016
Design Of Optimum Torsionally Flexible Proprotors For Tilt-Body Mav
APPLIED MECHANICS AND MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2012

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name Grant Register No. IP Level IP Category
PERFORMANCE VERIFICATION FOR 600 WATT PERMANENT MAGNET GENERATOR NATIONAL COPYRIGHT
12 METER UTM HORIZONTAL AXIS WIND TURBINE BLADE STRUCTURAL DESIGN AND STATIC ANALYSIS NATIONAL COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
NURUL AINI BINTI MOHD.AHYAN
THE EFFECT OF MICROPITS AND BIO-LUBRICANTS ON ALUMINIUM COLD WORK EXTRUSION PERFORMANCES
PHD GRADUATED CO-SUPERVISOR 2016
WONG KENG YINN
MEDICAL STAFF'S MOVEMENT EFFECTS ON PARTICLE COUNTS IN A SURGICAL ZONE
PHD GRADUATED CO-SUPERVISOR 2018
RIDWAN ARIEF SUBEKTI
PROPELLER TURBINE DESIGN AND OPTIMIZATION FOR VERY LOW HEAD APPLICATIONS.
PHD ON GOING SUPERVISOR
MUHAMMAD ZULHELMI HUSAINI BIN ZAHRI AFANDI

PHD ON GOING SUPERVISOR
AMMAR LUAIBI JAAFAR AL-DARRAJI
OPTIMAL AERODYNAMIC BLADE DESIGN FOR NOISE REDUCTION IN WIND TURBINES: A COMPUTATIONAL STUDY  
PHD ON GOING SUPERVISOR
FADRAH HANIM BINTI AD SUHADAK
TRIMETHYLOLPROPANE (TMP) WITH REDUCED GRAPHENE OXIDE (RGO) ADDITIVE BIOLUBRICANT USAGE IN VARIOUS TEXTURED JOURNAL BEARING  
PHD ON GOING CO-SUPERVISOR
OJAOMO KOLEOLA EBENEZER
CHARACTERIZATION AND TRIBOLOGICAL PERFORMANCE OF PALM OIL LUBRICANT WITH MULTI-WALLED CARBON NANOTUBES ADDITIVE
PHD ON GOING CO-SUPERVISOR
NURULAIN BINTI YAHAYA
WINGLET TURBINE BLADE FOR A LOW-SPEED HORIZONTAL AXIS WIND TURBINE
PHD ON GOING CO-SUPERVISOR
FRANC LUCAS PAUL GERMAIN

MASTER CROSS CAMPUS SUPERVISOR
TENGKU AHMAD AZHAN HAWARI BIN TENGKU MOHAMED

MASTER GRADUATED SUPERVISOR 2018
IBRAHIM ABDULLAH ALI MADAN

MASTER GRADUATED CO-SUPERVISOR 2018
NOR AZREEN BINTI MOHD SABRI

MASTER GRADUATED SUPERVISOR 2019
MUHAMMAD HAFIZ BIN ADNAN

MASTER GRADUATED SUPERVISOR 2020
ZURIANI BINTI ABDUL RAHMAN

MASTER GRADUATED SUPERVISOR 2021
TENGKU SHARMAINE BINTI TENGKU MOHD SHARIFUDIN

MASTER GRADUATED SUPERVISOR 2021
MOHAMAD ZAHID BIN MAZLAN
COMPUTATIONAL FLUID DYNAMICS ANALYSIS AND OPTIMIZATION OF HIGHWAY SAVONIUS WIND TURBINE INTEGRATED WITH GUIDE VANES
MASTER GRADUATED SUPERVISOR 2021
MUSTAFA ABDULKAREEM HUSSEIN ALDULAIMI

MASTER GRADUATED SUPERVISOR 2022
NURLIDIA BINTI ROMLI

MASTER GRADUATED SUPERVISOR 2023
PANG TUCK SENG

MASTER GRADUATED SUPERVISOR 2023
MUHAMMAD ASHRAF BIN AZLAN
TITLE: CFD AND EXPERIMENTAL INVESTIGATION ON AERODYNAMIC PERFORMANCE OF VARIABLE PITCH BLADES UNDER LOW WIND SPEED CONDITION
MASTER ON GOING SUPERVISOR
MOHAMAD ISAMUDDIN BIN MAJUNIT
CORRELATION BETWEEN ROTOR BLADE AERODYNAMICS AND PERMANENT MAGNET GENERATOR FOR MATCHED OFF-GRID WIND TURBINE SYSTEM
MASTER ON GOING SUPERVISOR
NAJAH SAIDAH BINTI AHMAD BAKHARI
A COMPARATIVE STUDY OF ENERGY PRODUCTION MODEL USING WEIBULL AND RAYLEIGH DISTRIBUTION FOR INLAND HORIZONTAL AXIS WIND TURBINE IN MALAYSIA  
MASTER ON GOING SUPERVISOR