GRANT(PI & MEMBERS)
23
PUBLICATIONS
31
INDEXED PUBLICATION
23
TOTAL STUDENTS
H-INDEXED (SCOPUS)
CITATIONS (SCOPUS)
Grant (PI)
NATIONAL GRANTS
1
UNIVERSITY FUND
3
TOTAL
Publications
INDEXED PUBLICATION
23
NON-INDEXED PUBLICATION
3
OTHERS PUBLICATION
5
TOTAL
Supervisions
MASTER
2
PHD
0
TOTAL
Legend : SPONSOR TYPE OF GRANT
Grant Name | Year |
---|---|
Pressure distribution and tribological performances of Trimethylolpropane (TMP) with reduced graphene oxide (rGO) additive biolubricant in various textured journal bearing. RUG OF UTM UTM Fundamental Research |
2022 |
Prediction of Lubrication Performances of Journal Bearing with Surface Texture Considering Thermal Influence RUG OF UTM UTM Encouragement Research |
2021 |
EXPERIMENTAL STUDY ON FRICTION AND WEAR PROPERTIES OF SPECIALTY NATURAL RUBBER TYRE TREAD COMPOUND USING PIN ON DISK TRIBOTESTER-ON-DISK TRIBOMETER RUG OF UTM UTM Fundamental Research |
2020 |
TRIBOLOGICAL PERFORMANCE AND LUBRICATION MECHANISMS OF PALM OIL MIXED WITH GRAPHITE, HBN AND MOS2 NANOPARTICLES AS ADDITIVES. MINISTRY OF EDUCATION Fundamental Research Grant Scheme |
2019 |
The effect of lift and drag coefficient of aerofoil with micro-dimple RUG OF UTM Tier 2 |
2018 |
DEVELOPMENT OF VEGETABLE OIL-BASED ENGINE LUBRICANT WITH ENHANCED THERMOPHYSICAL AND TRIBOLOGICAL PROPERTIES RUG OF UTM Tier 1 |
2018 |
LUBRICANT PERFORMANCE OF MODIFIED RBD PALM STEARIN OIL BY TRANS-ESTERIFICATION PROCESS RUG OF UTM Tier 1 |
2017 |
THE EFFECT OF THE ANTI-OXIDANT AGENT IN PALM OIL AS LUBRICANT RUG OF UTM Tier 1 |
2016 |
PEMBANGUNAN MINYAK KELAPA SEBAGAI MINYAK ABSORBER KERETA RUG OF UTM Tier 1 |
2015 |
Experimental Analysis of flow behaviour in electroless Nickel plating process tank for hard drive manufacturing RUG OF UTM Flagship-Research Group |
2014 |
Experimental Analysis of flow behaviour in electroless Nickel plating process tank RUG OF UTM Flagship-Research Group |
2014 |
Flow Behavior in the electroless nickel plating process tank for hard disk drive manufacturing RUG OF UTM Flagship-Research Group |
2014 |
Chemical modification to improve anti-wear and anti-friction effect of palm oil as metal forming bio-lubricant RUG OF UTM Encouragement Grant |
2014 |
Film cooling at the end of combustor simulator with trenched shaped cooling holes RUG OF UTM Tier 1 |
2014 |
NGV Refueling Facilities and Equipment Contract |
1998 |
Study on Engine for High Performance Utilization. Short Term |
1990 |
Legend : PUBLICATION CATEGORY TYPE OF AUTHORS
Publication Name | Year |
---|---|
The Role Of Oleic Acid On The Structural Changes Of Graphite Nanoplatelets In Enhancing The Tribological Performance Of A Palm Oil-Based Lubricant
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART J: JOURNAL OF ENGINEERING TRIBOLOGY Publication In Web Of Science CO-AUTHOR |
2023 |
Modelling The Tribological Performance Of Palm Mid Olein In Cold Forging Test Using Deform-3d
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART J: JOURNAL OF ENGINEERING TRIBOLOGY Publication In Web Of Science CO-AUTHOR |
2023 |
Fire Resistance Rating For Gypsum And Kapok Fiber Composite Materials
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CORRESPONDING AUTHOR |
2022 |
The Tribofilm Formation Of Mos2 Nanolubricant In Boundary Lubrication Regime
LECTURE NOTES IN MECHANICAL ENGINEERING Publication In Scopus CO-AUTHOR |
2022 |
Air Flow Analysis And Effect Of Angle On Rotation Vane Blade Through 90-Degree By Computational Fluid Dynamic
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CORRESPONDING AUTHOR |
2022 |
Experimental Investigation Of The Effectiveness Of Jet Impingement Cooling System On The Pressure Side Of The Turbine Blade
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CORRESPONDING AUTHOR |
2021 |
Friction Characteristic Study On Flat Surface Embedded With Micro Pit
EVERGREEN Publication In Scopus CO-AUTHOR |
2021 |
The Effectiveness Of Jet Impingement Cooling System On Various Flat Plate Surface
EVERGREEN Publication In Scopus CO-AUTHOR |
2021 |
Air Flow Analysis And Effect Of Angle On Rotation Vane Blade Trough 90ãÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂð Pipe Bend
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Publication In Scopus UTM FIRST AUTHOR |
2020 |
The Evaluation Of Drag And Lift Force Of Groove Cylinder In Wind Tunnel
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CO-AUTHOR |
2020 |
Determination Of Friction Coefficient In The Lubricated Ring Upsetting With Palm Kernel Oil For Cold Forging Of Aluminum Alloys
JURNAL TRIBOLOGI Publication In Web Of Science CO-AUTHOR |
2020 |
Performance Of Polymeric Viscosity Improver As Bio- Lubricant Additives
INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY Publication In Scopus CO-AUTHOR |
2019 |
Evaluation Of Lift And Drag Force Of Outward Dimple Cylinder Using Wind Tunnel
CFD LETTERS Publication In Scopus CO-AUTHOR |
2019 |
Evaluation Of Kapok Fiber And Gypsum Mixture To Improve Fire Resistance
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus UTM FIRST AUTHOR |
2019 |
The Effectiveness Of Jet Impingement Cooling System On Various Flat Plate Surface
THE 11TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2019 Proceedings UTM FIRST AUTHOR |
2019 |
The Anti-Wear And Extreme
Pressure Performance Of Cuo And
Graphite Nanoparticles As An
Additive In Palm Oil
INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY Publication In Scopus CO-AUTHOR |
2019 |
Study On Water Hammer Effect In Turbulent Flow Through The Pipe System
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CORRESPONDING AUTHOR |
2018 |
Evaluation Of Lift And Drag Force Of Outward Dimple Cylinder Using Wind Tunnel
FMTS Conference Paper CO-AUTHOR |
2018 |
Tribological Analysis Of Modified Rbd Palm Kernel Containing Anti-Oxidant Additive Using Four-Ball Tribotester
THE 2ND INTERNATIONAL SYMPOSIUM ON FLUID MECHANICS AND THERMAL SCIENCES (2ND IS - FMTS 2018) Conference Paper CO-AUTHOR |
2018 |
A Comprehensive Review On Palm Oil And The Challenges Using Vegetable Oil As Lubricant Base-Stock
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Publication In Scopus CO-AUTHOR |
2018 |
The Significant Effect Of Turbulence Characteristics On Heat Transfer Enhancement Using Nanofluids: A Comprehensive Review
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER Publication In Web Of Science CO-AUTHOR |
2016 |
Optimisation Of Dimple Depth On Cylinder In Drag Reduction
1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016 Conference Paper UTM FIRST AUTHOR |
2016 |
Latest Development On Computational Approaches For Nanofluid Flow Modeling: Navier-Stokes Based Multiphase Models
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER Publication In Web Of Science CO-AUTHOR |
2016 |
Turbulent-Forced Convective Heat Transfer And
Pressure Drop Analysis Of Fe3o4 Magnetic Nanofluid In A Circular Microchannel
JURNAL TEKNOLOGI (SCIENCE & TECHNOLOGY) Publication In Scopus CO-AUTHOR |
2015 |
Evaluation On The Tribological Properties Of Double Fractionated Palm Olein At Different Loads Using Pin-On-Disc Machine
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
Determining Alternatives For Metal Forming Lubricants: A Study Using Plane Strain Cold Extrusion Process Of Jis-A1100 Pure Aluminum Billet
JURNAL TEKNOLOGI Publication In Scopus CO-AUTHOR |
2015 |
Modification Of Rbd Palm Kernel And Rbd
Palm Stearin Oil With Zddp Additive
Addition
JURNAL TEKNOLOGI (SCIENCE & ENGINEERING) Publication In Scopus CO-AUTHOR |
2015 |
Flow Analysis Of Cooling Water In The Gas Turbine Fin Fan Cooler At Utilities Plant
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES Journal Article Non Citation-Indexed CO-AUTHOR |
2015 |
A Study Of Float Wave Energy Converter (Fwec) Model
JOURNAL OF ADVANCED RESEARCH IN APPLIED SCIENCES AND ENGINEERING TECHNOLOGY Journal Article Non Citation-Indexed CO-AUTHOR |
2015 |
The Effect Of Adding Diffuser By Experimental
JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS Journal Article Non Citation-Indexed CO-AUTHOR |
2015 |
Lubricity Performances Of Palm Oil Using Pin-On-Disk Tester
INTERNATIONAL TRIBOLOGY CONFERENCE Conference Paper CO-AUTHOR |
2015 |
Legend : IP CATEGORY IP LEVEL
Intellectual Property Name | Grant Register No. | IP Level | IP Category |
---|
Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL
Supervision List |
---|
WAN MOHAMAD AIMAN BIN WAN YAHAYA CORRELATION OF FRICTION IN ALUMINIUM COLD FORGING LUBRICATED WITH PALM OIL BASED   MASTER GRADUATED CO-SUPERVISOR 2018 |
ONG HO THEIN MASTER GRADUATED SUPERVISOR 2024 |