GRANT(PI & MEMBERS)

28

PUBLICATIONS

30

INDEXED PUBLICATION

21

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

NATIONAL GRANTS
3
UNIVERSITY FUND
3
TOTAL

Publications

INDEXED PUBLICATION
21
NON-INDEXED PUBLICATION
1
OTHERS PUBLICATION
8
TOTAL

Supervisions

DEGREE
0
MASTER
4
PHD
6
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
TEMPERATURE-DEPENDENT MECHANICAL PERFORMANCE OF FIBER METAL LAMINATE COMPOSITE STRUCTURES
RUG OF UTM UTM R&D Fund
2021
HIR 5.3 : EFFECT OF DRILLING PARAMETERS ON STRENGTH AND FATIGUE LIFE OF FIBRE-METAL LAMINATES COMPOSITE
RUG OF UTM High Impact Research Grant
2018
DYNAMIC MECHANICAL DEGRADATION MODEL OF TITANIA BIODEGRADABLE SCAFFOLDS
RUG OF UTM UTMShine
2017
Investigation on the effect of drilling parameters on strength and fatigue life of fibre-metal laminates.
RUG OF UTM Tier 1
2017
IMPACT CHARACTERISTICS OF NATURAL FIBRE WOVEN FABRICS IMPREGNATED WITH A SHEAR THICKENING FLUID (STF)
RUG OF UTM Tier 1
2017
DEVELOPMENT OF LIGHTWEIGHT BULLET-PROOF PANEL USING HYBRID COMPOSITES
RUG OF UTM Tier 1
2015
Fundamental investigation on damage evolution of natural fiber hybrid composites under blast loads
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2014
DEVELOPMENT OF A LIGHTWEIGHT SMART ASSISTIVE KNEE BRACE
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2014
Failure Behavior of Non-Autoclave Fiber Metal Laminates Subject to Quasi-Static Indentation and Low Velocity Impact Loading
RUG OF UTM Professional Development Research University
2014
INNOVATIVE DEVELOPMENT OF NATURAL FIBER COMPOSITE AGAINST BLAST LOADING
RUG OF UTM Tier 1
2014
Fabrication, characterization and optimization of smart composite beams with asymmetrically embedded shape memory alloys
RUG OF UTM Tier 1
2014
Fundamental study on impact characteristics and energy absorption capability of various fiber metal laminate (FML) thin-walled tubular structures
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2013
Development Of An Explosive-Proof Shield Using Lightweight Composite Materials
MINISTRY OF EDUCATION Prototype Development Research Grant Scheme
2013
Investigation of Basalt Woven Fabrics for Military Applications
RUG OF UTM Tier 2
2012
INITIAL INVESTIGATION ON FIBRE METAL LAMINATES (FMLs) COMPOSITES FOR AUTOMOTIVE STRUCTURE APPLICATIONS
MINISTRY OF EDUCATION Exploratory Research Grant Scheme
2012
OPTIMIZATIONS OF COMPOSITE DOME UNDER INTERNAL PRESSURE AND LOW VELOCITY IMPACT LOADING
RUG OF UTM Tier 2
2012
Characterization and Optimization of Natural Composite Core with Aluminum Facesheets Subjected to Low-Velocity Transverse Impact
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2012
Characterization of Composite Smart Sandwich Structure With Embedded Piezoelectric Sensors
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2012
DEVELOPMENT OF NATURAL FIBRE-BASED FIBRE-METAL LAMINATES
RUG OF UTM Tier 2
2011
CHARACTERISTIC AND OPTIMIZATION OF THE COMPOSITE DOME DUE TO INTERNAL AND EXTERNAL PRESSURES
RUG OF UTM Tier 2
2011
FUNDAMENTAL STUDY ON QUASI STATIC RESPONSE OF FIBRE METAL LAMINATES (FMLS) COMPOSITES LONGITUDINAL RAIL IN AUTOMOTIVE STRUCTURE
RUG OF UTM Tier 2
2011
The Impact and blast resistance of composites structures
RUG OF UTM Tier 2
2011
Development Of Polyetheretherket-Hydroxyapatite Bioactive Composite For Load Bearing Bone Analogue
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund
2009
Design and prototyping a super-kart
Short Term
1992
The Development and Fabrication of Automative Body Panel Structure from Glass Fiber Rubber Composite (GFRP).
Short Term
1990

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Crashworthiness Capability Of Thin-Walled Fibre Metal Laminate Tubes Under Axial Crushing
ENGINEERING STRUCTURES
Publication In Web Of Science CO-AUTHOR
2022

OSSEOCONDUCTIVE SURFACE ENGINEERING FOR ORTHOPEDIC IMPLANTS
Book (Text) UTM FIRST AUTHOR
2021
Linear-Nonlinear Stiffness Responses Of Carbon Fiber-Reinforced Polymer Composite Materials And Structures: A Numerical Study
POLYMERS
Publication In Web Of Science UTM FIRST AUTHOR
2021
Experimental Studies On The Impact Characteristics Of Seamless Fibre Metal Laminate (Fml) Tubes
MATERIALS TODAY: PROCEEDINGS
Publication In Scopus CO-AUTHOR
2021
Investigation On The Effect Of Drilling Parameters On Tensile Loading Of Fibre-Metal Laminates
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Experimental Investigation On Low Velocity Impact Of A Novel Fibre Metal Laminate (Fml) Tube
INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING
Publication In Scopus CO-AUTHOR
2019
Characterization Of Hybrid Yarn/Fabrics From Of Kenaf-Kevlar Fibers
JOURNAL OF MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR
2018
Woven Kenaf/Kevlar Hybrid Yarn As Potential Fiber Reinforced For Anti-Ballistic Composite Material
FIBERS AND POLYMERS
Publication In Web Of Science CO-AUTHOR
2017

TRAUMA PLATING SYSTEMS BIOMECHANICAL, MATERIAL, BIOLOGICAL, AND CLINICAL ASPECTS
Book (Text) UTM FIRST AUTHOR
2017
Interfacial Fracture Toughness
ENGINEERING MATERIALS FOR SPECIFIC APPLICATION:MATERIAL PROPERTIES
Book Chapter CORRESPONDING AUTHOR
2016
Comparison Of Foam Core Sandwich Panel And Through-Thickness Polymer Pin-Reinforced Foam Core Sandwich Panel Subject To Indentation And Flatwise Compression Loadings
POLYMER COMPOSITES
Publication In Web Of Science UTM FIRST AUTHOR
2016
The Effect Of Silane On The Biomechanical Properties Of Peek/Ha Composite
ADVANCED MATERIALS RESEARCH
Proceedings CO-AUTHOR
2015
Biomechanical And Bioactivity Concepts Of Polyetheretherketone Composites For Use In Orthopedic Implants—A Review
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH - PART A
Publication In Web Of Science UTM FIRST AUTHOR
2015
Interfacial Fracture Of The Fibre-Metal Laminates Based On Fibre Reinforced Thermoplastics
MATERIALS & DESIGN
Publication In Web Of Science UTM FIRST AUTHOR
2015
Reduction Of Motorcycle'S Drum Brake Squeal Noise Using Constrained Layer Damping (Cld)
1ST ICRIL-INTERNATIONAL CONFERENCE ON INNOVATION IN SCIENCE AND TECHNOLOGY (LICIST 2015)
Proceedings CO-AUTHOR
2015
Polyetheretherketone/Hydroxyapatite Biocomposites Compounded Via Nanomixer Single Screw Extruder: Thermal And Characterization
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR
2015
Experimental And Numerical Studies Of Fiber Metal Laminate (Fml) Thin-Walled Tubes Under Impact Loading
ADVANCED STRUCTURED MATERIALS
Publication In Scopus UTM FIRST AUTHOR
2015
Reduction Of Drum Brake Squeal Noise Using Constrained Layer Damping (Cld)
1ST INTERNATIONAL CONFERENCE ON INNOVATION IN SCIENCE AND TECHNOLOGY
Conference Paper CO-AUTHOR
2015
Effect Of Strain Rate On Indentation Behaviour Of Kenaf-Based Fibre Metal Laminates
THE 5TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE AND HUMANITIES
Proceedings CO-AUTHOR
2014
Flatwise Compression And Flexural Behavior Of Foam Core And Polymer Pin-Reinforced Foam Core Composite Sandwich Panels
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
Publication In Web Of Science UTM FIRST AUTHOR
2014
Processing Of A Multi-Layer Polyetheretherketone Composite For Use In Acetabular Cup Prosthesis
JOURNAL OF APPLIED POLYMER SCIENCE
Publication In Web Of Science UTM FIRST AUTHOR
2014
Indentation Fracture Behaviour Of Fibre Metal Laminates Based On Kenaf/Epoxy
INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR
2014
Experimental Investigation On Free Vibration Of Foam-Core Sandwich Plate With And Without Circular Polymer Columns
ADVANCED MATERIALS RESEARCH
Publication In Scopus CO-AUTHOR
2014
The High-Velocity Impact Response Of Thermoplastic-Matrix Fibre-Metal Laminates
The Journal of Strain Analysis for Engineering Design
Publication In Web Of Science UTM FIRST AUTHOR
2012
Effect Of Pretreatment Process On Thermal Oxidation Of Biomedical Grade Cobalt Based Alloy
ADVANCED MATERIALS RESEARCH
Publication In Web Of Science CO-AUTHOR
2012
Multi-Objective Optimization Of Filament Wound Composite Pressure Vessels Based On Weight And Matrix Cracking/ Burst Pressure Using Imperialist Competitive Algorithm
INTERNATIONAL CONFERENCE ON APPLIED MECHANICS AND MANUFACTURING TECHNOLOGY (AMMT 2012)
Publication In Web Of Science CO-AUTHOR
2012
The High Velocity Impact Response Of Self-Reinforced Polypropylene Fibre Metal Laminates
DAMAGE AND FRACTURE OF COMPOSITE MATERIALS AND STRUCTURES
Book Chapter UTM FIRST AUTHOR
2012
Kinematic Analysis Of Powered Lower Limb Orthoses For Gait Rehabilitation Of Hemiplegic And Hemiparetic Patients
INTERNATIONAL JOURNAL OF MATHEMATICAL MODELS AND METHODS IN APPLIED SCIENCES
Publication In Scopus CO-AUTHOR
2011
Development Of Novel Polymer Composite Beam Using Ultrasonic Welding Process For Acetabular Cup Prosthesis
KEY ENGINEERING MATERIALS
Publication In Web Of Science CO-AUTHOR
2011
Polymer Composites
Numerical Modeling of the Impact Response of Fiber-metal Laminates
Journal Article Non Citation-Indexed CO-AUTHOR
2009

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name Grant Register No. IP Level IP Category
INDUSTRIAL ADVISORY PANEL EVALUATION FORM NATIONAL COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
BEHZAD ABDI
CHARACTERIZATION AND OPTIMIZATION OF GENERAL COMPOSITE DOME ENDS SUBJECT TO INTERNAL PRESSURE
PHD GRADUATED CO-SUPERVISOR 2013
AHMAD
KESAN SERAPAN AIR KE ATAS SALUTAN GEL BAGI KOMPOSIT GENTIAN KENAF DAN KACA BERTETULANG POLIESTER TERHADAP SIFAT-SIFAT MEKANIKAL
PHD GRADUATED SUPERVISOR 2016
SHAROUL BIN JAMBARI
CHARACTERISATION AND TENSILE PROPERTIES OF POTENTIAL BALLISTIC COMPOSITES MATERIAL OF HYBRID KENAF/ARAMID YARN
PHD GRADUATED CO-SUPERVISOR 2019
SYED MOHD SAIFUL AZWAN BIN SYED HAMZAH
STRENGTH AND ENERGY ABSORPTION CHARACTERISTICS OF POLYMER PIN-REINFORCED FOAM CORE SANDWICH PANEL
PHD GRADUATED CO-SUPERVISOR 2022
MAZLAN BIN AHMAD MANSOR
ENERGY ABSORPTION PERFORMANCE OF SEAMLESS FIBRE METAL LAMINATE TUBES
PHD GRADUATED CO-SUPERVISOR 2023
AHMAD RAMLI BIN RASHIDI
BIOPROCESS OPTIMIZATION OF XANTHAN PRODUCTION BY XANTHOMONAS CAMPESTRIS USING ALTERNATIVE SUBSTRATE
MASTER GRADUATED CO-SUPERVISOR 2012
AMIRHOSSEIN GOHARIAN
BONDING PROPERTIES OF CARBON FIBER REINFORCED-PEEK AND HYDROXYAPATITE-PEEK JOINED BY ULTRASONIC WELDING
MASTER GRADUATED CO-SUPERVISOR 2013
MOHAMAD AUZAI BIN MOHAMAD RAZIF

MASTER GRADUATED CO-SUPERVISOR 2019