GRANT(PI & MEMBERS)

18

PUBLICATIONS

69

INDEXED PUBLICATION

36

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

NATIONAL GRANTS
1
UNIVERSITY FUND
2
TOTAL

Publications

INDEXED PUBLICATION
36
NON-INDEXED PUBLICATION
5
OTHERS PUBLICATION
28
TOTAL

Supervisions

MASTER
2
PHD
5
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
The design and fabrication of small-scaled wind turbine blade for applications in Malaysia applying the particle swarm optimization (PSO) method
RUG OF UTM UTM Encouragement Research
2021
ANALYSIS OF BEACH PROFILE HYDRODYNAMIC CHANGES ON THE BEACH PROTECTION AND INNOVATION STRUCTURE
INSTITUT PENYELIDIKAN HIDRAULIK KEBANGSAAN MALAYSIA Contract
2020
The Optimization of Four Simultaneous Effects on Kenaf/Carbon Nanotubes (CNTs) Hybrid Composites by Using Box-Behnken Design
RUG OF UTM UTM Fundamental Research
2020
IMPROVEMENT OF MODE SHAPE CURVATURE ALGORITHM USING ROBUST REGRESSION FOR DAMAGE DETECTION IN LAMINATED COMPOSITE
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2019
THE DOUBLE RESONANCE OF HIGH SPEED TIMOSHENKO'S SHAFT SYSTEM WITH TORSIONAL EFFECT
RUG OF UTM Tier 2
2018
DEVELOPMENT A NEW FORMULATION OF SUSTAINABLE INTELLIGENT FLUID FOR MALAYSIAN VEHICLE SEMI ACTIVE SUSPENSION SYSTEM
RUG OF UTM Tier 1
2018
Dynamic Stress Prediction Model of Skin (Bovine) and Synthetic Skin (Silicone) under Low Impact Loading
MINISTRY OF EDUCATION Networking Grant
2017
A Modified Gapped Smoothing Method for Detecting Horizontal and Vertical Crack
RUG OF UTM Tier 2
2017
Mercerisation Treatment Enhancement of Kenaf Fiber/Polypropyelene Composites using Box-Behnken Design
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2016
The Postbuckling And Postbuckling Strenght Improvements Of Laminated Composited Plates Using Shape Memory Alloys
MINISTRY OF EDUCATION Fundamental Research Grant Scheme
2010
Stress Analysis of Laminated Composite Plates with Embedded Shape Memory Alloy (SMA) Using Finite Element Method
Short Term
2000

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Extended Blade Element Momentum Theory For The Design Of Small-Scale Wind Turbines
JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS
Publication In Scopus UTM FIRST AUTHOR
2023
Crashworthiness Measurement On Axial Compression Loading Of Biocomposite Structures; Prospect Development
Value-Added Biocomposites Technology, Innovation, and Opportunity
Book Chapter CO-AUTHOR
2021
Asssessing The Validity Of Torsional Motion On Dynamic Analysis Of Rotor Bearing System Using Finite Elements
THE 3RD INTERNATIONAL CONFERENCE ON SEPARATION TECHNOLOGY (ICOST 2020)
Conference Paper UTM FIRST AUTHOR
2021
Optimization On Tensile Properties Of Kenaf/Multi‑Walled Cnt Hybrid Composites With Box‑Behnken Design
Applied Composite Materials
Publication In Web Of Science CO-AUTHOR
2021
Experimental And Simulation Of Aerodynamic Performance Of The Small-Scale Wind Turbine Blades For Usage In Malaysia
THE 2ND INTERNATIONAL CONFERENCE ON INNOVATIVE TECHNOLOGY, ENGINEERING AND SCIENCES (ICITES 2020
Proceedings UTM FIRST AUTHOR
2020
Whirling Frequencies Of Rotor Systems Using Ansys Apdl
5TH INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGY & APPLIED SCIENCES AND 6TH MALAYSIA-JAPAN INTERNATIONAL CONFERENCE (ICATAS-MJJIC 2020)
Conference Paper CORRESPONDING AUTHOR
2020
Progressive Failure Analysis Of Laminated Composite Plates
INTERNATIONAL CONFERANCE ON APPLIED TECHNOLOGY AND APPLIED SCIENCE (ICATAS 2020)
Conference Paper UTM FIRST AUTHOR
2020
Post-Buckling Of Bamboo Reinforced Composite Plates
INTERNATIONAL CONFERANCE ON APPLIED TECHNOLOGY AND APPLIED SCIENCE (ICATAS 2020)
Conference Paper UTM FIRST AUTHOR
2020
Designing An Automated Composter For Food Waste Management With The Implementation Of Internet Of Things
JOURNAL OF SUSTAINABLE NATURAL RESOURCE
Journal Article Non Citation-Indexed CO-AUTHOR
2020
The Parametric Instability Improvement Of Fully Anisotropic Composite Plates With Embedded Shape Memory Alloy
ADVANCED COMPOSITES LETTERS
Publication In Web Of Science CO-AUTHOR
2020
Influence Of Selective Laser Melting Scanning Speed Parameter On The Surface Morphology, Surface Roughness And Micropores For Manufactured Ti6al4v Parts
JOURNAL OF MATERIALS RESEARCH
Publication In Web Of Science CO-AUTHOR
2020
Impact Damage Resistance And Post Impact Tolerance Of Optimum Banana-Pseudo Stem Fiber Reinforced Epoxy Sandwich Structures
APPLIED SCIENCES - BASEL
Publication In Web Of Science CO-AUTHOR
2020
Mercerization Optimization Of Bamboo (Bambusa Vulgaris) Fiber-Reinforced Epoxy Composite Structures Using A Box-Behnken Design
POLYMERS
Publication In Web Of Science CO-AUTHOR
2020
Optimizing The Mercerisation Effect On The Mode I Fracture Toughness Of Bambusa Vulgaris Bamboo Using Surface Response Method
Implementation and Evaluation of Green Materials in Technology Development
Book Chapter CO-AUTHOR
2020
Seismic Control Of A Building Structure Equip With Hybrid Mass Damper Using Sliding Mode Control
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR
2020
Energy Consumption Clustering Analysis In Residential Building
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR
2020
Thermal Post-Buckling Of Composite Plates Subjected To Uniform Thermal Loading Using Finite Element Method
TEST ENGINEERING AND MANAGEMENT
Publication In Scopus CORRESPONDING AUTHOR
2020
Mode I Fracture Toughness Of Optimized Alkali-Treated Bambusa Vulgaris Bamboo By Box-Behnken Design
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR
2020
The Whirling Frequency Of High Speed Shaft With Torsional Effect
INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY AND ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR
2019
Full Control Of Quadrotor Unmanned Aerial Vehicle Using Multivariable Proportional Integral Derivative Controller
2019 IEEE 9TH INTERNATIONAL CONFERENCE ON SYSTEM ENGINEERING AND TECHNOLOGY (ICSET)
Conference Paper CO-AUTHOR
2019
The Elastic Properties Of Unidirectional Bamboo Fibre Reinforced Epoxy Composites
INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Vehicle High Speed Stability Analysis Through Integrated Control
PROCEEDINGS - 2018 IEEE CONFERENCE ON SYSTEMS, PROCESS AND CONTROL, ICSPC 2018
Publication In Scopus CO-AUTHOR
2019
Dynamic Instability Response Of Smart Composite Material
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
Publication In Web Of Science UTM FIRST AUTHOR
2019
Development Of Small Scale Home Monitoring System Based On Internet Of Things
OPEN INTERNATIONAL JOURNAL OF INFORMATICS (OIJI)
Journal Article Non Citation-Indexed CO-AUTHOR
2019
Study On Stability And Control Analysis For Cascade Hybrid Electric Vehicle
ADVANCES IN AUTOMOTIVE ENGINEERING
Journal Article Non Citation-Indexed CO-AUTHOR
2019
The Impact Behaviour Of Carbon Fiber-Epoxy Composite Leading Edge Using Finite Element Method
INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY AND ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2019
Vehicle High Speed Stability Analysis Through Integrated Control
2018 IEEE CONFERENCE ON SYSTEMS, PROCESS AND CONTROL (ICSPC2018)
Conference Paper CO-AUTHOR
2018
Mode I Fracture Toughness Of Optimized Alkali Treated Bambusa Vulgaris Bamboo By Box Behken Design
4TH INTERNATIONAL CONFERENCE ON MECHANICAL, MANUFACTURING AND PLANT ENGINEERING
Conference Paper CO-AUTHOR
2018
Parametric Study On Dynamic Instability Of Fully Anisotropic Composite Plates
INTERNATIONAL CONFERENCE ON ENHANCED RESEARCH AND INDUSTRIAL APPLICATION
Conference Paper CORRESPONDING AUTHOR
2018
Dynamic Instability Response Of Smart Composite Material
4TH INTERNATIONAL CONFERENCE ON MECHANICAL, MANUFACTURING AND PLANT ENGINEERING
Proceedings CORRESPONDING AUTHOR
2018
The Whirling Frequency Of High-Speed Shaft With Torsional Effect
4TH INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE, AND AEROSPACE ENGINEERING 2018 (ICMAAE’18)
Conference Paper CORRESPONDING AUTHOR
2018
Control Analysis For Enhancing Ride Comfort Through Linear Quadratic Regulator
14TH INTERNATIONAL SYMPOSIUM ON ADVANCED VEHICLE CONTROL, AVEC'18
Conference Paper CO-AUTHOR
2018
Linear Quadratic Regulator Based Control Device For Active Suspension System With Enhanced Vehicle Ride Comfort
JOURNAL OF THE SOCIETY OF AUTOMOTIVE ENGINEERS MALAYSIA
Journal Article Non Citation-Indexed CO-AUTHOR
2018
Bamboo Reinforced Polymer Composite - A Comprehensive Review
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2018
Tensile Behaviour Of Chemical Treatment For Bamboo Epoxy Composites
CHEMICAL ENGINEERING TRANSACTIONS
Publication In Scopus CO-AUTHOR
2018
The Active Strain Energy Tuning On The Parametric Resonance Of Composite Plates Using Finite Element Method
JOURNAL OF MECHANICAL ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR
2018
Tensile Behaviours Of Single-Walled Carbon Nanotubes
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
Publication In Web Of Science CORRESPONDING AUTHOR
2018
Improvement Of Pitch Motion Control Of An Aircraft Systems
TELKOMNIKA (TELECOMMUNICATION COMPUTING ELECTRONICS AND CONTROL)
Publication In Scopus CO-AUTHOR
2018
Dynamic Instability Of High-Speed Rotating Shaft With Torsional Effect
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL
Publication In Scopus CORRESPONDING AUTHOR
2018
Failure Of Steel Helical Gear Used For Automotive Transmission
JOURNAL OF ADVANCED RESEARCH IN MATERIALS SCIENCE
Journal Article Non Citation-Indexed CORRESPONDING AUTHOR
2017
The Numerical Modelling On The Parametric Instability Improvement Of Laminated Composite Plate With Embedded Smart Material
INTERNATIONAL CONFERENCE ON SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS 2017
Conference Paper CORRESPONDING AUTHOR
2017
The Active Strain Energy Tuning On The Parametric Resonance Of Composite Plates Using Finite Element Method
THE 5TH INTERNATIONAL CONFERENCE ON ADVANCED IN MECHANICAL ENGINEERING (ICAME 2017)
Conference Paper UTM FIRST AUTHOR
2017
Enhancing Ride Comfort Of Quarter Car Semi-Active Suspension System Through State-Feedback Controller
SECOND INTERNATIONAL CONFERENCE ON THE FUTURE OF ASEAN (ICOFA 2017)
Conference Paper CO-AUTHOR
2017
Tensile Behaviours Of Single-Walled Carbon Nanotube
INTERNATIONAL CONFERENCE ON MECHANICAL, MANUFACTURING AND PROCESS PLANT ENGINEERING
Conference Paper CORRESPONDING AUTHOR
2017
First Ply Failure Load (Fpl) Of A Laminated Composite Plate Subjected To Transverse Load
THE 10TH INTERNATIONAL WORKSHOP ON PLASMA APPLICATION AND HYBRID FUNCTIONALLY MATERIALS - IAPS 2017
Conference Paper UTM FIRST AUTHOR
2017
Improvement On Ride Comfort Of Quarter-Car Active Suspension System Using Linear Quadratic Regulator
SECOND INTERNATIONAL CONFERENCE ON THE FUTURE OF ASEAN (ICOFA 2017)
Conference Paper CO-AUTHOR
2017
Predicting Tensile Properties Of Carbon Nanotubes Using Finite Element Method
THE 10TH INTERNATIONAL WORKSHOP ON PLASMA APPLICATION AND HYBRID FUNCTIONALLY MATERIALS
Conference Paper UTM FIRST AUTHOR
2017
An Overview Of Passive Techniques For Heat Transfer Augmentation In Microchannel Heat Sink
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
Publication In Web Of Science CO-AUTHOR
2017
The Effect Of Changing Disk Parameters On Whirling Frequency Of High Speed Rotor System
IOP CONFERENCE SERIES PROCEEDING
Publication In Scopus CORRESPONDING AUTHOR
2017
Parametric Instability Of Shaft With Discs
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR
2017
Enhancing The Stabilization Of Aircraft Pitch Motion Control Via Intelligent And Classical Method
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR
2017
Synthesization And Microstructural Analysis Of Arenga Pinnata Fibres And Silicone Rubber For New Silicone Biocomposite Material
JOURNAL OF MECHANICAL ENGINEERING
Publication In Scopus UTM FIRST AUTHOR
2017
Parametric Instability Of Static Shafts-Disk System Using Finite Element Method
IOP CONFERENCE SERIES
Publication In Scopus UTM FIRST AUTHOR
2017
Parametric Instability Of Laminated Composite Plates Using Third Order Shear Deformation Theory
ADVANCED SCIENCE LETTERS
Publication In Scopus CORRESPONDING AUTHOR
2017
Parametric Instability Of Shafts Based On The Nelsonã¢Â€Â™S Beam Model Using Finite Element Method
ADVANCED SCIENCES LETTERS
Publication In Scopus UTM FIRST AUTHOR
2017
Numerical Modelling Of Parametric Instability Problem For Composite Plate Using Finite Element Method
AIP CONFERENCE PROCEEDINGS
Publication In Scopus CORRESPONDING AUTHOR
2016
A Review On Chemical Treatments Of Natural Fibre In Reinforced Polymer Composites
2ND COMPOSITE MATERIALS AND MANUFACTURING SYMPOSIUM
Conference Paper CO-AUTHOR
2016
Mechanical Properties Of Bamboo Reinforced Epoxy Sandwich Structure Composites
3RD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH
Conference Paper CO-AUTHOR
2015
The Thermal Stability Property Of Bio-Composites: A Review
INCIEC 2014 - PROCEEDINGS OF THE INTERNATIONAL CIVIL AND INFRASTRUCTURE ENGINEERING CONFERENCE 2014
Proceedings INDIVIDUAL AUTHOR
2015
The Natural Frequency Of The Shape Memory Alloy Anti-Symmetric Angle-Ply Composite Plates Using Finite Element Method
WORLD VIRTUAL CONFERENCE ON ADVANCED RESEARCH IN MATERIALS AND ENGINEERING APPLICATIONS
Proceedings INDIVIDUAL AUTHOR
2015
Dynamic Stability Of Shaft Interconnected Through Joint: A Review
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus UTM FIRST AUTHOR
2015
The Natural Fiber Composites Based On Bamboo Fibers: A Review
ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES
Publication In Scopus UTM FIRST AUTHOR
2015
Mechanical Behavior Of Kenaf/Epoxy Corrugated Sandwich Structures
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER)
Conference Paper CO-AUTHOR
2015
Mechanical Properties Of Bamboo Reinforced Epoxy Sandwich Structure Composites
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR
2015
The Instability Improvement Of The Symmetric Angle-Ply And Cross-Ply Composite Plates With Shape Memory Alloy Using Finite Element Method
ADVANCES IN MECHANICAL ENGINEERING
Publication In Web Of Science CORRESPONDING AUTHOR
2014
The Instability Improvement Of The Shape Memory Alloy Composite Plates Subjected To In-Plane Parabolic Temperature Distribution
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CORRESPONDING AUTHOR
2014
The Strain Energy Tuning Of The Shape Memory Alloy On The Post- Buckling Of Composite Plates Using Finite Element Method
MATERIALS AND MANUFACTURING TECHNOLOGIES XIV
Publication In Web Of Science UTM FIRST AUTHOR
2012
Finite Element Method In The Thermal Buckling Analysis Of Anisotropic Plates
Advances In Materials, Manufacturing and Materials Engineering
Book Chapter INDIVIDUAL AUTHOR
2008
Thermal Buckling Of Anti-Symmetric Composite Plates With Geometric Non-Linearity Using Finite Element Method
Advances In Materials, Manufacturing and Materials Engineering
Book Chapter INDIVIDUAL AUTHOR
2008

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
ABDUL MALEK BIN ABDUL WAHAB
PARAMETRIC INSTABILITY ANALYSIS WITH TORSIONAL EFFECTS OF ROTATING SHAFT SYSTEM
PHD GRADUATED SUPERVISOR 2017
ARIFF FARHAN BIN MOHD NOR
OPTIMISATION OF RECYCLED POLYLACTIC ACID REINFORCED PINEAPPLE LEAF NANOCELLULOSE FILAMENT FOR 3D LATTICE STRUCTURE APPLICATIONS  
PHD ON GOING CO-SUPERVISOR
NURIHAN BINTI OMAR
QUASI-STATIC MECHANICAL PROPERTIES AND IMPACT BEHAVIOUR OF HYBRID PALF REINFORCED NAPIER FILLED POLYMER COMPOSITE  
PHD ON GOING SUPERVISOR
ZARINA BINTI YUSOF
MECHANICAL PERFORMANCE OF HORIZONTAL SMALL SCALE WIND TURBINE BLADE  
PHD ON GOING SUPERVISOR
SITI AMNI HUSNA BINTI ROSLAN
THE MULTI-OBJECTIVES OPTIMIZATION OF AERODYNAMICS AND STRUCTURAL PERFORMANCES OF MICRO WIND TURBINE BLADE WITH CORRUGATED STRUCTURES
PHD ON GOING SUPERVISOR
SITI AMNI HUSNA BINTI ROSLAN
THE MULTI-OBJECTIVES OPTIMIZATION OF AERODYNAMICS AND STRUCTURAL PERFORMANCES OF MICRO WIND TURBINE BLADE WITH CORRUGATED STRUCTURES
MASTER GRADUATED CO-SUPERVISOR 2017
ZARINA BINTI YUSOF
MECHANICAL PERFORMANCE OF HORIZONTAL SMALL SCALE WIND TURBINE BLADE  
MASTER GRADUATED SUPERVISOR 2018