GRANT(PI & MEMBERS)

70

PUBLICATIONS

288

INDEXED PUBLICATION

199

TOTAL STUDENTS

H-INDEXED (SCOPUS)

CITATIONS (SCOPUS)

Grant (PI)

NATIONAL GRANTS
8
UNIVERSITY FUND
14
TOTAL

Publications

INDEXED PUBLICATION
199
NON-INDEXED PUBLICATION
13
OTHERS PUBLICATION
76
TOTAL

Supervisions

PHD
17
MASTER
44
TOTAL

Legend : SPONSOR TYPE OF GRANT

Grant Name Year
DEVELOPMENT OF AN ADVANCED ENGINE TRIBO-TESTER TO EVALUATE BIO-LUBRICANTS FOR HYDROGEN ENGINE
POST DOCTORAL FELLOWSHIP (SPECIAL) Professional Development Research University Special		 2025
IST Program 1.0 : Hydrogen Internal Combustion Engine for Decarbonizing Diesel Vehicle
BAHAGIAN KECEMERLANGAN AKADEMIK, JABATAN PENDIDIKAN TINGGI HICOE Research Grant 		2025
IST Project 1.3 : DEVELOPMENT OF AN ENGINE TRIBOTESTER FOR HYDROGEN-POWERED ENGINES
BAHAGIAN KECEMERLANGAN AKADEMIK, JABATAN PENDIDIKAN TINGGI HICOE Research Grant 		2025
IST HICOE Networking : Hydrogen Internal Combustion Engine for Decarbonizing Diesel Vehicle
BAHAGIAN KECEMERLANGAN AKADEMIK, JABATAN PENDIDIKAN TINGGI HICOE Research Grant 		2025
IST HICOE Training : Hydrogen Internal Combustion Engine for Decarbonizing Diesel Vehicle
BAHAGIAN KECEMERLANGAN AKADEMIK, JABATAN PENDIDIKAN TINGGI HICOE Research Grant 		2025
IST HICOE Infrastructure: Hydrogen Internal Combustion Engine for Decarbonizing Diesel Vehicle
BAHAGIAN KECEMERLANGAN AKADEMIK, JABATAN PENDIDIKAN TINGGI HICOE Research Grant 		2025
CFD suite for estimation of ship hydrodynamic performance
INNOVATION AND COMMERCIALISATION CENTRE (ICC) Prototype Development Fund 		2024
Optimizing Palm Mid-Olein-Infused Hydrodynamic Journal Bearings: Unraveling the Dynamics of Dimple Effects on Moving Surfaces
Fundamental Research Grant Scheme 		2024
The tribological performance of palm oil-based mixing with nanoplatelets (graphene) in cold forging test.
RESEARCH UNIVERSITY GRANT Junior Visiting Researcher		 2024
Synthesis of Bio-based Lubricant Trimethylolpropane TMP Ester From Stearic Acid Through Esterification Process
RUG OF UTM UTM Fundamental Research 		2023
Lubricity Control of Palm Oil-Based Lubricants in Hydrodynamic Journal Bearings through Microflow-Induced Fluid Film Formation in Transverse Groove Textures
Fundamental Research Grant Scheme 		2023
Competitive Adsorption Isotherms of Protic Ionic Liquid and Organic Friction Modifier for Effective Boundary Friction Control under Moisture Attack in Palm Trimethylolpropane Ester
Fundamental Research Grant Scheme 		2023
Enhanced Material Removal Rate Algorithm in Electrical Discharge Machining using Type-2 Fuzzy Logic Spike Current Discharge
Fundamental Research Grant Scheme 		2023
Enhancing the flying performance of rotary-wing aircraft by minimising the unsteady wake effects on its aerodynamic and stability characteristics.
RUG OF UTM UTM Encouragement Research 		2023
Pressure distribution and tribological performances of Trimethylolpropane (TMP) with reduced graphene oxide (rGO) additive biolubricant in various textured journal bearing.
RUG OF UTM UTM Fundamental Research 		2022
CORRELATION BETWEEN ROTORBLADE AND PMG CHARACTERISTICS FOR A MATCHING UPWIND TURBINE SYSTEM
RUG OF UTM UTM Fundamental Research 		2022
The Integration of Oleic Acid (C18:1) with Anti-oxidant Tertiary Butyl-Hydroquinone (TBHQ) and Viscosity Improver Ethylene Vinyl Acetate (EVA) as Bio-lubricant in Journal Bearing
RUG OF UTM UTM Encouragement Research 		2022
KKP Satelit 2 : Analysis of engine performance and emission characteristics of oil palm fiber-based graphenecoated piston ring
Konsortium Kecemerlangan Penyelidikan		 2022
Modelling Lubricant Film Formation Mechanism of Protic Ionic Liquid-based Polytetrafluoroethylene Grease for Electric Vehicles
RUG OF UTM UTM Fundamental Research 		2022
Prediction of Lubrication Performances of Journal Bearing with Surface Texture Considering Thermal Influence
RUG OF UTM UTM Encouragement Research 		2021
CEP Future Energy (Collaborative Education program on Biomass and Solar Renewable Energy System – The Future Energy for ASEAN Region)
JAPAN INTERNATIONAL COOPERATION AGENCY (JICA) International Grant		 2021
EXPERIMENTAL STUDY ON FRICTION AND WEAR PROPERTIES OF SPECIALTY NATURAL RUBBER TYRE TREAD COMPOUND USING PIN ON DISK TRIBOTESTER-ON-DISK TRIBOMETER
RUG OF UTM UTM Fundamental Research 		2020
UNDERSTANDING THE EFFECTS OF MIXTURE FRACTION AND FUEL COMPOSITION ON CARBON NANOTUBE GROWTH IN HETEROGENEOUS SYNTHESIS USING GREEN HYDROCARBON
RUG OF UTM UTM Fundamental Research 		2020
Exploring the potential of nanofluid as a new working fluid for Ocean Thermal Energy Conversion(OTEC) system
Fundamental Research Grant Scheme 		2019
TRIBOLOGICAL PERFORMANCE AND LUBRICATION MECHANISMS OF PALM OIL MIXED WITH GRAPHITE, HBN AND MOS2 NANOPARTICLES AS ADDITIVES.
Fundamental Research Grant Scheme 		2019
Impact of Biodiesel Fuels (B30) on Selected Diesel Engine and Injector Spray Quality
LEMBAGA MINYAK SAWIT MALAYSIA Non Goverment Agency		 2019
Tribological investigation of palm stearin oil based lubricant synthesised through chemoenzymatic modification
Fundamental Research Grant Scheme 		2019
Investigation into the performance of palm mid olein as a fluid lubricant in journal bearings in terms of oil film pressure, temperature, thickness and friction coefficient
Fundamental Research Grant Scheme 		2019
A Molecular-Level Study on the Influence of Fatty Acid Polyol Ester Composition on Boundary Lubrication of Trimethylolpropane Ester (TMPE)
Fundamental Research Grant Scheme 		2019
UTM-TDR 13.4(T1): AN INTELLIGENT BEARING CONDITION MONITORING SYSTEM FOR RESILIENT CONTACT SYSTEM
RUG OF UTM UTM Transdiciplinary Research Grant 		2018
UTM-TDR 13.1 (T1): HYBRID NANOCOMPOSITE COATING FOR RESILIENT CONTACT SYSTEMS
RUG OF UTM UTM Transdiciplinary Research Grant 		2018
UTM-TDR13:INNOVATIVE MATERIALS FOR RESILIENT CONTACT SYSTEMS
RUG OF UTM UTM Transdiciplinary Research Grant 		2018
UTM-TDR 13.2 (T2): Metal Sponge-based material development for load bearing component of resilient contact system.
RUG OF UTM UTM Transdiciplinary Research Grant 		2018
UTM-TDR 13.3 (T2): HIGH PERFORMANCE PERFLUOROPOLYETHER-BASED GREASE LUBRICATION SYSTEM
RUG OF UTM UTM Transdiciplinary Research Grant 		2018
The effect of lift and drag coefficient of aerofoil with micro-dimple
RUG OF UTM Tier 2 		2018
DEVELOPMENT OF VEGETABLE OIL-BASED ENGINE LUBRICANT WITH ENHANCED THERMOPHYSICAL AND TRIBOLOGICAL PROPERTIES
RUG OF UTM Tier 1 		2018
LUBRICANT PERFORMANCE OF MODIFIED RBD PALM STEARIN OIL BY TRANS-ESTERIFICATION PROCESS
RUG OF UTM Tier 1 		2017
EXPERIMENTAL AND NUMERICAL ANALYSIS OF HEAT TRANSFER AND HYDRODYNAMIC BEHAVIOUR OF NANOFLUID IN AUTOMOTIVE ENGINE COOLING SYSTEM
RUG OF UTM Geran Penyelidik Baharu		 2016
Friction and wear study of cast iron material lubricated with palm fatty acid distillate with pin-on-disk tribotester
RUG OF UTM Tier 2 		2016
DEVELOPMENT OF ULTRASONICALLY EXCITER
RUG OF UTM Geran Penyelidik Baharu		 2016
Determination of thermal properties of hybrid nanofluid
RUG OF UTM Tier 1 		2016
THE EFFECT OF THE ANTI-OXIDANT AGENT IN PALM OIL AS LUBRICANT
RUG OF UTM Tier 1 		2016
PEMBANGUNAN MINYAK KELAPA SEBAGAI MINYAK ABSORBER KERETA
RUG OF UTM Tier 1 		2015
Oil analysis of palm stearin as bio-lubricant
Fundamental Research Grant Scheme 		2014
Experimental Analysis of flow behaviour in electroless Nickel plating process tank
RUG OF UTM Flagship-Research Group 		2014
Experimental Analysis of flow behaviour in electroless Nickel plating process tank for hard drive manufacturing
RUG OF UTM Flagship-Research Group 		2014
Flow Behavior in the electroless nickel plating process tank for hard disk drive manufacturing
RUG OF UTM Flagship-Research Group 		2014
STUDY ON THE EFFECTIVENESS OF USING LOW POWER EDM CURRENT GENERATOR IN MACHINING MICROPITS ON HIP IMPLANT.
Fundamental Research Grant Scheme 		2014
BRAKE WEAR PARTICLE EMISSION ANALYSIS FOR IMPROVED TRIBOLOGICAL AND NOISE PERFORMANCE
RUG OF UTM Tier 1 		2014
Chemical modification to improve anti-wear and anti-friction effect of palm oil as metal forming bio-lubricant
RUG OF UTM Encouragement Grant 		2014
Film cooling at the end of combustor simulator with trenched shaped cooling holes
RUG OF UTM Tier 1 		2014
Chemical modification to improve anti-wear and anti-friction effect of palm oil as metal forming bio-lubricant
RUG OF UTM Professional Development Research University		 2014
A NEW WORKPIECE POSITIONING SYSTEM OF ELECTRICAL DISCHARGE MACHINING FOR MACHINING MICRO PITS ON METAL-ON-METAL HIP IMPLANT FOR LUBRICATION PURPOSE
Fundamental Research Grant Scheme 		2013
Innovative Data Collection And Numerical Data Analysis To Reveal Fundamental Wear Mechanisms
Fundamental Research Grant Scheme 		2013
Experimental evaluation of friction on acetabular with different viscosity lubricant and pits pattern
Fundamental Research Grant Scheme 		2013
The oxidation effect of palm oil as a lubricant
RUG OF UTM Tier 1 		2012
Numerical research on heat transfer enhancement using nanofluid
RUG OF UTM Tier 2 		2012
MULTIPLE INLET SWIRL STABILIZED BURNER FOR BIOFUELS COMBUSTION
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund 		2012
Can Lattice Boltzmann Scheme Predict the Blood Clotting Process?
Exploratory Research Grant Scheme 		2012
The effect of micro-pits density in reducing friction force
Tier 2 		2012
ULTRA LOW NOX COMBUSTION SYSTEM USING BIO-DIESEL WITH MULTI INLET SWIRLER CONFIGURATION UTILISING VARIOUS TYPE OF BIO-FUEL
RUG OF UTM Tier 2 		2012
ENHANCING SURVIVAL RATE OF JOINT REPLACEMENT IMPLANTS THROUGH ADVANCED ELECTRICAL DISCHARGE MACHINING SYSTEM
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund 		2012
Experimental and numerical investigation of air and contaminant flow within urban street canyon
Fundamental Research Grant Scheme 		2012
Exlporing New Technique of Articulation for Wrist Replacement Implant
Exploratory Research Grant Scheme 		2011
TRIBOLOGICAL EVALUATION OF PALM FATTY ACID DISTILLATE USING FOURBALL WEAR TESTER
RUG OF UTM Tier 2 		2011
SWIRL OPTIMIZATION STUDY ON BURNER SYSTEM PERFORMANCE UTILIZING MULTIPLE SWIRLS INLET
RUG OF UTM Tier 1 		2011
Design and development of drag chute for Malaysia aircraft
RUG OF UTM Tier 1 		2011
Controlling Sliding Friction Force By Micro - Pattern Tool Surface In Cold Work Extrusion
Fundamental Research Grant Scheme 		2010
Development of Novel Implant With Micropatterns To Improve Wear Resistance In Load Bearing Joint of The Hip and Knee
MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund 		2010
Development of RBD Palm Stearin as Lubricant in Metal Forming Process
UNIVERSITI TEKNOLOGI MALAYSIA Institutional Research Grant Scheme 		2009

Legend : PUBLICATION CATEGORY TYPE OF AUTHORS

Publication Name Year
Enhanced Thermo-Oxidative And Tribological Properties Of Oleic Acid-Based Lubricant With Antioxidants And Viscosity Improver
THE ENGINEER STORY
Proceedings UTM FIRST AUTHOR 		2025
Tribological Challenges Associated With Hydrogen In Internal Combustion Engine
THE ENGINEER STORY
Conference Paper CO-AUTHOR 		2025
The Effect Of Dimple Depth To The Friction And Wear In Linear Motion
JOURNAL OF TRANSPORT AND SYSTEM ENGINEERING
Journal Article Non Citation-Indexed CO-AUTHOR 		2025
Tribological Properties Of Oil Palm Fiber-Derived Graphene Coatings On Piston Ring; Influence Of Hydrogen Flow Rate During Cvd Process
WEAR
Publication In Web Of Science UTM FIRST AUTHOR 		2025
Rheological, Thermal And Tribological Assessment Of Palm Stearin-Based Biolubricants In Boundary Lubrication Regime
FUEL
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR 		2025
Tribological Responsiveness And Mechanism Of Pdms Polymer And Anti-Wear H-Bn As Additives In Base Jatropha Lubricant: Synergetic And Antagonistic Study
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2025
Mini Traction Machine For Lubricant Evaluation
THE ENGINEER STORY
Publication In Academic And Profesional Magazine FIRST UTM CORRESPONDING AUTHOR 		2025
Effectiveness Of Carbon Nanomaterials As Lubricant Additives: Recent Review
MATERIALS TODAY NANO
Publication In Web Of Science UTM FIRST AUTHOR 		2025
Effect Of Oleic Acid Surfactant On The Stability, Viscosity And Tribological Performance Of Hbn Versus Mos2 Nanolubricants
TRIBOLOGY INTERNATIONAL
Publication In Web Of Science UTM FIRST AUTHOR 		2025
The Friction And Wear Behavior Of Bio-Based Graphene-Coated Piston Ring
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2025
Cfd Analysis Of Palm Oil And Red Palm Oil For Lubricant Applications
CFD LETTERS
Publication In Scopus CO-AUTHOR 		2025
Rapeseed Oil-Based Lubricant In Hydrodynamic Journal Bearing: A Computational Fluid Dynamics Approach
CFD LETTERS
Publication In Scopus CO-AUTHOR 		2025
Comparison On Tribological Responsiveness Of Jatropha Lubricant Modified With H-Bn On Aisi E-52100 Steel And 6061 Aluminum Alloy Materials
SOCIETY OF PETROLEUM ENGINEERS - SPE NIGERIA ANNUAL INTERNATIONAL CONFERENCE AND EXHIBITION, NAIC 2025
Publication In Scopus CO-AUTHOR 		2025
Assessment On Oxidative Stability And Tribological Response Of Ficus Carica Oil, Enhanced With Tbhq And Eva Additives
TRIBOLOGY INTERNATIONAL
Publication In Web Of Science CO-AUTHOR 		2025

FLUID MECHANICS: THEORY AND APPLICATIONS
Original Book CO-AUTHOR 		2024
Numerical Investigation Into Trapezoid Surface Texture Of Journal Bearing And Rbd Palm Oil As Lubricant
EVERGREEN
Publication In Scopus CO-AUTHOR 		2024
Aerodynamic Performance Of Naca 0012 Aerofoil With Plain Flap Under Various Conditions
IMAT2024
Proceedings FIRST UTM CORRESPONDING AUTHOR 		2024
Exploring The Lubricating Properties Of Virgin Coconut And Palm Oil Blends For Eco-Friendly Applications
THE ENGINEER STORY
Conference Paper UTM FIRST AUTHOR 		2024
Performance Of Hydrodynamic Journal Bearing Under Influence Of Solid Contaminants
THE 13TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUID
Conference Paper CO-AUTHOR 		2024
Tribological Assessment Of Palm Oil Blended With An Oxidation Inhibitor
IMAT2024
Conference Paper FIRST UTM CORRESPONDING AUTHOR 		2024
Bio-Based Lubricant With Additives: Tribological Performances In Hydrodynamic Journal Bearing
INDUSTRIAL LUBRICATION AND TRIBOLOGY
Publication In Web Of Science CO-AUTHOR 		2024
Tribological Performances Of Trimethylolpropane (Tmp) Blended With Graphene Oxide Using Four-Ball Tribotester
TRIBOLOGY ONLINE
Publication In Web Of Science CO-AUTHOR 		2024
Friction And Wear Characteristics Of Palm Mid Olein Base Stock With Tertiary Butyl-Hydroquinone And Ethylene Vinyl Acetate As Biobased Lubricant
JURNAL TRIBOLOGI
Publication In Web Of Science CO-AUTHOR 		2024
Tribological Performance And Mechanism Of Graphite, Hbn And Mos2 As Nano-Additives In Palm Kernel Oil-Based Lubricants: A Comparative Study
JOURNAL OF MOLECULAR LIQUIDS
Publication In Web Of Science UTM FIRST AUTHOR 		2024
Exploring The Performance Of Tmp Trioleate Esters In Real-World Automotive Engines: A Tribological Analysis
JURNAL TRIBOLOGI
Publication In Web Of Science FIRST UTM CORRESPONDING AUTHOR 		2024
Tribological In Metal Forming Process And The Use Of Bio Lubricant As Metal Forming Lubricant: A Review
JURNAL TEKNOLOGI-SCIENCES & ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR 		2024
Impact Of The Taper Die'S Indentation Towards The Extrusion Process Frictional Behavior In Various Palm Oil-Based Lubricant Type Influence
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2024
Synthesising Graphene With Renewably‑Sourced Bio‑Carbon Precursors: A Brief Review
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR 		2024
Optimisation Of Friction Surfacing Process Parameters For A1100 Aluminium Utilising Different Derivatives Of Palm Oil Based On Closed Forging Test
BIOMASS CONVERSION AND BIOREFINERY
Publication In Web Of Science UTM FIRST AUTHOR 		2024
Addition Of Graphene Oxide (Go) Nanoparticles In Trimethylolpropane Ester (Tmpe) Bio-Lubricant: Impact On Tribological Characteristics Of Friction And Wear
JURNAL TRIBOLOGI
Publication In Web Of Science CO-AUTHOR 		2024
Tribological Performances Of Palm Oil Derived-Oleic Acid Biolubricant Incorporated With Antioxidant And Viscosity Improver
JURNAL TRIBOLOGI
Publication In Web Of Science CO-AUTHOR 		2024
Tribological Characteristics Of Palm Olein Under Conditions Of Elevated Temperature And Effect Of Addition Molybdenum Disulfide At High Load
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2024
Porous Media Modeling Of Flow Straightening Device For Water Tunnel
APPLICATIONS OF CFD SIMULATION IN MECHANICAL ENGINEERING SERIES 3
Book Chapter CO-AUTHOR 		2024
Nano Bio-Lubricant As A Sustainable Trend In Tribology Towards Environmental Stability: Opportunities And Challenges
EVERGREEN
Publication In Scopus UTM FIRST AUTHOR 		2024
Effect Of Suction Holes On The Aerodynamic Performance Of Naca 0012 Aerofoil
IMAT2024
Proceedings FIRST UTM CORRESPONDING AUTHOR 		2024
Lubrication Performance Of Textured Journal Bearing With Axial Grooves Using Cfd Approach
THE 5TH MYTRIBOS INTERNATIONAL SYMPOSIUM
Conference Paper CO-AUTHOR 		2023
Tribological Performance Of Trimethylolpropane Ester Bio-Lubricant Enhanced By Graphene Oxide Nanoparticles And Oleic Acid As A Surfactant
TRIBOLOGY INTERNATIONAL
Publication In Web Of Science CO-AUTHOR 		2023
Effect Of Tert-Butylhydroquinone On Tribological Performance Of Palm Oil Lubricant And Aluminium Plate Using Linear Reciprocating Tribometer
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2023
The Role Of Oleic Acid On The Structural Changes Of Graphite Nanoplatelets In Enhancing The Tribological Performance Of A Palm Oil-Based Lubricant
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART J: JOURNAL OF ENGINEERING TRIBOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2023
Surface Modification Effect Of Aluminium Block On The Tribological Performance For Super Olein
INDUSTRIAL LUBRICATION AND TRIBOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2023
Modelling The Open-Closed Forging Using Different Type Of Palm Oil Derivatives
THE ENGINEER STORY
Article In Mass Media UTM FIRST AUTHOR 		2023
Modelling The Tribological Performance Of Palm Mid Olein In Cold Forging Test Using Deform-3d
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART J: JOURNAL OF ENGINEERING TRIBOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2023
Different Behaviors Of Friction In Open And Closed Forging Test Utilizing Palm Oil-Based Lubricants
LUBRICANTS
Publication In Web Of Science UTM FIRST AUTHOR 		2023
Investigation On The Effect Of Surface Texture Depth Into The Performance Of Journal Bearing Using Cfd
AIP CONFERENCE PROCEEDINGS
Publication In Scopus CO-AUTHOR 		2023
Anti-Oxidation Additives In Palm Oil Lubricant Towards A Sustainable Lubrication Approach
THE ENGINEER STORY
Article In Mass Media UTM FIRST AUTHOR 		2023
Tribological Analysis Of New Generation Piston Ring
THE ENGINEER STORY
Article In Mass Media UTM FIRST AUTHOR 		2023
Tribological Performance Evaluation Of Organic Polymer As Additives In Vegetable Oil Using Steel Materials
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
Publication In Web Of Science CO-AUTHOR 		2023
Eichhornia Crassipes Nanoparticles As A Sustainable Lubricant Additive: Tribological Properties Optimization And Performance Under Boundary Lubrication Regime
INDUSTRIAL CROPS AND PRODUCTS
Publication In Web Of Science CO-AUTHOR 		2022
Nano-Frictional Investigation On Boundary Lubricity Of Oleic Acid, Methyl Oleate And Trimethylolpropane Trioleate
JURNAL TRIBOLOGI
Publication In Web Of Science CO-AUTHOR 		2022
Improving Tribological Properties And Shear Stability Of Base Lubricant Using Eichhornia Crassipes Carboxylmethyl Cellulose Polymer Under Different Conditions
INDUSTRIAL CROPS AND PRODUCTS
Publication In Web Of Science CO-AUTHOR 		2022
Tribological Behavior Of Organic Formulated Anti-Wear Additive Under High Frequency Reciprocating Rig And Unidirectional Orientations: Particles Transport Behavior And Film Formation Mechanism
TRIBOLOGY INTERNATIONAL
Publication In Web Of Science CO-AUTHOR 		2022
Frictional And Material Deformation Of Aluminium Alloy In Cold Forging Test Under Different Derivatives Of Palm Oil Lubrication Condition
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR 		2022
Friction Condition Of Aluminum Alloy Aa6061 Lubricated With Bio-Lubricant In Cold Forging Test
INDUSTRIAL LUBRICATION AND TRIBOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2022
Tribological Performance Of Palm Olein With Additive Using Linear Reciprocating Tribotester
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus UTM FIRST AUTHOR 		2022
Fire Resistance Rating For Gypsum And Kapok Fiber Composite Materials
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR 		2022
The Tribofilm Formation Of Mos2 Nanolubricant In Boundary Lubrication Regime
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR 		2022
Potential Of Rbd Palm Oil As A Lubricant In Textured Journal Bearing Using Cfd With Consideration Of Cavitation And Conjugate Heat Transfer
CFD LETTERS
Publication In Scopus CO-AUTHOR 		2022
Air Flow Analysis And Effect Of Angle On Rotation Vane Blade Through 90-Degree By Computational Fluid Dynamic
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR 		2022
Friction Properties Of Epoxidised Natural Rubber Based Tyre Treads
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus UTM FIRST AUTHOR 		2022
A Study Of Palm Oil And Engine Oil Viscosity Effect By Using Cfd
LECTURE NOTES IN MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR 		2022
Tribological Behavior Of Organic Anti-Wear And Friction Reducing Additive Of Zddp Under Sliding Condition: Synergism And Antagonism Effect
EVERGREEN
Publication In Scopus CO-AUTHOR 		2022
Feasibility Study On Biomass Bamboo Renewable Energy In Malaysia, Indonesia, Vietnam And Japan
THE 7TH INTERNATIONAL CONFERENCE ON LOW CARBON ASIA AND BEYOND (ICLCA'21)
Conference Paper CO-AUTHOR 		2021
Effect Of Concentration On The Tribological Behavior Of Cyclic Heated Formulated Organic Carbon Nanotubes In Base Lubricant Under Boundary Conditions
TRIBOLOGY ONLINE
Publication In Scopus CO-AUTHOR 		2021
Investigation Of Spray Characteristics Of Biodiesel Algae Using Computational Fluid Dynamics
FUEL, MIXTURE FORMATION AND COMBUSTION PROCESS
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2021
Nano-Particles Additives As A Promising Trend In Tribology: A Review On Their Fundamentals And Mechanisms On Friction And Wear Reduction
EVERGREEN JOINT JOURNAL OF NOVEL CARBON RESOURCE SCIENCES & GREEN ASIA STRATEGY
Journal Article Non Citation-Indexed CO-AUTHOR 		2021
Investigation Of Spray Characteristics Of Biodiesel Algae Using Computational Fluid Dynamics
FUEL, MIXTURE FORMATION AND COMBUSTION PROCESS
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2021
Lubrication Of Textured Journal Bearing By Using Vegetable Oil: A Review Of Approaches, Challenges, And Opportunities
RENEWABLE AND SUSTAINABLE ENERGY REVIEWS
Publication In Web Of Science CO-AUTHOR 		2021
Comprehensive Review On High Hydrogen Permselectivity Of Palladium Based Membranes: Part I -Research Progress Of Concentration Polarisation Phenomena
JOHNSON MATTHEY TECHNOLOGY REVIEW
Publication In Web Of Science CO-AUTHOR 		2021
Comprehensive Review On High Hydrogen Permselectivity Of Palladium Based Membranes: Part Ii -Hydrogen Permeation Flux Under Concentration Polarisation Influence
JOHNSON MATTHEY TECHNOLOGY REVIEW
Publication In Web Of Science CO-AUTHOR 		2021
Friction Study On Chemically Modified Rbd Pk Oil As A Potential Renewable Resource
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR 		2021
Cold Extrusion Using Biodegradable Oil As Lubricant: Experimental And Simulation Analysis
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2021
Synthesis And Tribological Studies Of Epoxidized Palm Stearin Methyl Ester As A Green Lubricant
JOURNAL OF CLEANER PRODUCTION
Publication In Web Of Science UTM FIRST AUTHOR 		2021
Effects Of Different Water Percentages In Non-Surfactant Water-In-Diesel Emulsion Fuel On The Performance And Exhaust Emissions Of A Small-Scale Industrial Burner
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY
Publication In Web Of Science CO-AUTHOR 		2021
A Study Of Cavitation Effect In A Journal Bearing Using Cfd: A Case Study Of Engine Oil, Palm Oil And Water
JURNAL TRIBOLOGI
Publication In Scopus CO-AUTHOR 		2021
Performance Analysis Of Highway Wind Turbine Enhanced With Wind Guide Vanes Using The Taguchi Method
CFD LETTERS
Publication In Scopus CO-AUTHOR 		2021
Friction Characteristic Study On Flat Surface Embedded With Micro Pit
EVERGREEN
Publication In Scopus UTM FIRST AUTHOR 		2021
Solar And Biomass Potential Of Renewable Energy In Selected Asean Countries And Japan
JOURNAL OF PHYSICS: CONFERENCE SERIES
Publication In Scopus CO-AUTHOR 		2021
The Effectiveness Of Jet Impingement Cooling System On Various Flat Plate Surface
EVERGREEN
Publication In Scopus UTM FIRST AUTHOR 		2021
Experimental Investigation Of The Effectiveness Of Jet Impingement Cooling System On The Pressure Side Of The Turbine Blade
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR 		2021
Tribological Behavior Of Organic Formulated Polymer Concentration Effect In Bio-Based Lubricant Using High-Frequency Reciprocating Rig
JURNAL TRIBOLOGI
Publication In Scopus CO-AUTHOR 		2021
Eichhornia Crassipes Transformation From Problems To Wide Unique Source Of Sustainable Materials In Engineering Application
5TH INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGY AND APPLIED SCIENCES 2020 ICATAS 2020 IN CONJUNCTION WITH THE 6TH MALAYSIA-JAPAN JOINT INTERNATIONAL CONFERENCE 2020 MJJIC 2020 (ICATAS-MJJIC 2020)
Conference Paper CO-AUTHOR 		2021
Influence Of Intermediate Esters On Boundary Frictional Properties Of Palm Methyl Ester
8TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE AND HUMANITIES (IGCESH 2020)
Conference Paper CO-AUTHOR 		2020
Evaluation Of Drag And Lift Forces Of Grooved Cylinders In Wind Tunnel
JURNAL MEKANIKAL
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2020
Determination Of Friction Coefficient In The Lubricated Ring Upsetting With Palm Kernel Oil For Cold Forging Of Aluminum Alloys
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2020
The Tribological Performance Of Hydrodynamic Journal Bearing Using Bio-Based Lubricant
TRIBOLOGY IN INDUSTRY
Publication In Scopus UTM FIRST AUTHOR 		2020
Air Flow Analysis And Effect Of Angle On Rotation Vane Blade Trough 90ãƒÂƒÃ‚ƒÃ‚ƒÃ‚‚° Pipe Bend
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR 		2020
The Evaluation Of Drag And Lift Force Of Groove Cylinder In Wind Tunnel
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus UTM FIRST AUTHOR 		2020
Environmentally Approach For Enhancing Tribological Characteristics In Metal Forming: A Review
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2020
The Effectiveness Of Jet Impingement Cooling System On Various Flat Plate Surface
THE 11TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS 2019
Proceedings CO-AUTHOR 		2019
Tribological Effect Of Palm Sterin And Engine Oil (Cmeo) On Pure Aluminium Pin Steel Disc With Varies Speed And Constant Load
JURNAL TEKNOLOGI
Publication In Scopus UTM FIRST AUTHOR 		2019
Performance Augmentation Of Betz Horizontal Axis Wind Turbine By Integrating The Brim Typed Diffuser Shroud
THE 4TH INTERNATIONAL SYMPOSIUM ON FLUID MECHANICS AND THERMAL SCIENCES -CONFERENCE PROCEEDINGS ENGINEERING SCIENCE AND TECHNOLOGY
Proceedings CO-AUTHOR 		2019
Cfd Investigation On The Jet-Engine Inspired Wind Turbine
THE 4TH INTERNATIONAL SYMPOSIUM ON FLUID MECHANICS AND THERMAL SCIENCES - CONFERENCE PROCEEDINGS ENGINEERING SCIENCE AND TECHNOLOGY
Proceedings CO-AUTHOR 		2019
The Tribological Performances Of Super Olein As Fluid Lubricant Using Four-Ball Tribotester
TRIBOLOGY INTERNATIONAL
Publication In Web Of Science UTM FIRST AUTHOR 		2019
Dispersion Stability And Lubrication Mechanism Of Nanolubricants: A Review
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING GREEN TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2019
The Tribological Performance Of Modified Rbd Palm Kernel Oil Under Extreme Pressure Load Test
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2019
Friction And Wear Study Of Passenger Car Piston Top Ring Sliding On Cast Iron Material Lubricated With Palm Fatty Acid Distillate (Pfad)
JURNAL TRIBOLOGI
Publication In Web Of Science CO-AUTHOR 		2019
Biolubricant Production From Palm Stearin Through Enzymatic Transesterification Method
BIOCHEMICAL ENGINEERING JOURNAL
Publication In Web Of Science UTM FIRST AUTHOR 		2019
Effect Of Pineapple Leaf (Palf), Napier, And Hemp Fibres As Filler On The Scratch Resistance Of Epoxy Composites
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2019
Evaluation Of Kapok Fiber And Gypsum Mixture To Improve Fire Resistance
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR 		2019
Evaluation Of Lift And Drag Force Of Outward Dimple Cylinder Using Wind Tunnel
CFD LETTERS
Publication In Scopus UTM FIRST AUTHOR 		2019
Numerical Investigation Of Direct Absorption Solar Collector Using Nanofluids: A Review
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING
Publication In Scopus CO-AUTHOR 		2019
Numerical Investigation Of Wake Energy Induced By Cruising Passenger Vehicles On Highway
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR 		2019
The Effect Of The Different Percentage Of Pour Point Depressant (Ppd) On The Tribological Properties Of Palm Kernel Oil
TRIBOLOGY IN INDUSTRY
Publication In Scopus UTM FIRST AUTHOR 		2019
Tribological Analysis Of Modified Rbd Palm Kernel Containing Anti-Oxidant Additive Using Four-Ball Tribotester
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus UTM FIRST AUTHOR 		2019
Mechanical And Wear Behaviour Of Nanostructure Tio2-Ag Coating On Cobalt Chromium Alloys By Air Plasma Spray And High Velocity Oxy-Fuel
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY
Publication In Scopus CO-AUTHOR 		2019
Custom Cylinder Liner-Piston Ring Combination On Pin-On- Disc For Lubricant Characteristic Study
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CORRESPONDING AUTHOR 		2019
The Anti-Wear And Extreme Pressure Performance Of Cuo And Graphite Nanoparticles As An Additive In Palm Oil
INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY
Publication In Scopus UTM FIRST AUTHOR 		2019
Anti-Oxidant Property Of Eichhornia Crassipes In Oil Samples
INTERNATIONAL JOURNAL OF ENGINEERING AND ADVANCED TECHNOLOGY
Publication In Scopus CO-AUTHOR 		2019
Performance Of Polymeric Viscosity Improver As Bio- Lubricant Additives
INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY
Publication In Scopus UTM FIRST AUTHOR 		2019

MINYAK SAWIT SEBAGAI BAHAN PELINCIRAN
Original Book INDIVIDUAL AUTHOR 		2019
Preparation And Dispersion Stability Of Graphite Nanoparticles In Palm Oil
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018
Proceedings UTM FIRST AUTHOR 		2018
A Comprehensive Review On Palm Oil And The Challenges Using Vegetable Oil As Lubricant Base-Stock
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CORRESPONDING AUTHOR 		2018
Tribological Evaluation Of Modified Rbd Palm Olein-Based Lubricant On Orthogonal Cutting Process
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018
Proceedings UTM FIRST AUTHOR 		2018
Evaluation Of Palm Oil As Cold Forging Lubricant Of Aluminium A1100 Using Double Cup Extrusion Test
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018
Proceedings CORRESPONDING AUTHOR 		2018
The Performances Of Palm Mid Olein As Lubricant In Journal Bearing Application
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGI 2018
Proceedings UTM FIRST AUTHOR 		2018
Tribological Study Of Textured And Untextured Taper Die In Cold Extrusion Process
2ND INTERNATIONAL CONFERENCE OF APPLIED SCIENCES ON ENGINEERING, BUSINESS, LINGUISTIC AND INFORMATION TECHNOLOGY (ICO-ASCNITECH 2018)
Conference Paper CO-AUTHOR 		2018
Tribological Analysis Of Modified Rbd Palm Kernel Containing Anti-Oxidant Additive Using Four-Ball Tribotester
THE 2ND INTERNATIONAL SYMPOSIUM ON FLUID MECHANICS AND THERMAL SCIENCES (2ND IS - FMTS 2018)
Conference Paper UTM FIRST AUTHOR 		2018
Performance And Anti-Wear Mechanism Of Polymeric Viscosity Improver As Bio-Lubricant Additives.
SYMPOSIUM ON DAMAGE MECHANISMS IN MATERIALS AND STRUCTURES 2018
Conference Paper UTM FIRST AUTHOR 		2018
The Anti-Wear And Extreme Pressure Performance Of Cuo And Graphite Nanoparticles As An Additive In Palm Oil
SYMPOSIUM ON DAMAGE MECHANISMS IN MATERIALS AND STRUCTURES 2018
Conference Paper UTM FIRST AUTHOR 		2018
Evaluation Of Lift And Drag Force Of Outward Dimple Cylinder Using Wind Tunnel
FMTS
Conference Paper UTM FIRST AUTHOR 		2018
Numerical Investigation Of Wake Energy Induced By Cruising Passenger Vehicles On Highway
THE SECOND INTERNATIONAL SYMPOSIUM ON FLUID MECHANICS AND THERMAL SCIENCES (2ND IS-FMTS 2018)
Conference Paper CO-AUTHOR 		2018
Friction And Wear Study Of Passenger Car Piston Top Ring Sliding On Cast Iron Material Lubricated With Palm Fatty Acid Distillate (Pfad)
THE 6TH ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018
Proceedings CO-AUTHOR 		2018
Performance, Emissions And Carbon Deposit Characteristics Of Diesel Engine Operating On Emulsion Fuel
ENERGY
Publication In Web Of Science CO-AUTHOR 		2018
Investigation Of Tribological Properties Of Cuo/Palm Oil Nanolubricant Using Pin-On-Disc Tribotester
GREEN MATERIALS
Publication In Web Of Science UTM FIRST AUTHOR 		2018
Nano-Additives Incorporated Water In Diesel Emulsion Fuel: Fuel Properties, Performance And Emission Characteristics Assessment
ENERGY CONVERSION AND MANAGEMENT
Publication In Web Of Science CO-AUTHOR 		2018
Tribological Behavior Of The Refined, Bleached And Deodorized Palm Kernel As An Alternative Lubricant.
SCIENTIA IRANICA
Publication In Web Of Science UTM FIRST AUTHOR 		2018
Tribological Investigations On The Application Of Oil-Miscible Ionic Liquids Additives In Modified Jatropha-Based Metalworking Fluid
TRIBOLOGY INTERNATIONAL
Publication In Web Of Science UTM FIRST AUTHOR 		2018
Preparation And Dispersion Stability Of Graphite Nanoparticles In Palm Oil
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2018
Tribological Evaluations Of Modified Rbd Palm Olein-Based Lubricants In Machining Processes
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2018
The Effect Of Fluidity Of Palm Kernel Oil With Pour Point Depressant On Coefficient Of Friction Using Fourball Tribotester
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CORRESPONDING AUTHOR 		2018
Facile Approaches To Designing Pits On Acetabular Cups Using Cooper Electrodes In Die Sinking Electrical Discharge Machining
MATERIAL TODAY
Publication In Scopus UTM FIRST AUTHOR 		2018
Study On Water Hammer Effect In Turbulent Flow Through The Pipe System
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Publication In Scopus CO-AUTHOR 		2018
The Effect Of Low Temperature Test On Lubrication Performance Of Palm Kernel Oil With Addition Of Ppd As A Lubricant(Astm D4172)
JOURNAL OF MECHANICAL ENGINEERING
Publication In Scopus UTM FIRST AUTHOR 		2018
Relation Between Coefficient Of Friction And Surface Roughness Of Workpiece In Bulk Plastic Deformation
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018
Proceedings UTM FIRST AUTHOR 		2018
Evaluation Of Rbd Palm Stearin As Alternative Lubricant For Cold Forward Extrusion Process
ICADME 2017
Proceedings UTM FIRST AUTHOR 		2017
Development Of Palm Kernel Oil With Addition Of Pour Point Depressants As A Lubricant Using Four-Ball Tribotester (Astm D4172)
THE COLLOQUIUM
Proceedings UTM FIRST AUTHOR 		2017
Palm Oil As An Alternative Lubricant Oil: A Brief Review
THE COLLOQUIUM
Proceedings UTM FIRST AUTHOR 		2017
A Review Of Renewable And Sustainable Resources From Palm Based Oil
THE COLLOQUIUM
Proceedings UTM FIRST AUTHOR 		2017
Comparison On Tribological Properties Of Vegetable Oil Upon Addition Of Carbon Based Nanoparticles
29TH SYMPOSIUM OF MALAYSIAN CHEMICAL ENGINEERS (SOMCHE) 2016
Proceedings UTM FIRST AUTHOR 		2017
Performance Of Copper Oxide/Distilled Water Nanofluid In Evacuated Tube Solar Collector (Etsc) Water Heater With Internal Coil Under Thermosyphon System Circulations
APPLIED THERMAL ENGINEERING
Publication In Web Of Science CO-AUTHOR 		2017
Surface Texturing And Alternative Lubricant: Tribological Study Of Tapered Die Sliding Contact Surface In Cold Extrusion Process
TRIBOLOGY TRANSACTIONS
Publication In Web Of Science UTM FIRST AUTHOR 		2017
Surface Modification Of Biomaterial Embedded With Pits Using Die Sinker Machine
SCIENTIA IRANICA
Publication In Web Of Science UTM FIRST AUTHOR 		2017
A Review On The Use Of Carbon Nanotubes Nanofluid For Energy Harvesting System
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Publication In Web Of Science CO-AUTHOR 		2017
Recent Progress On The Application Of Nanofluids In Minimum Quantity Lubrication Machining: A Review
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Publication In Web Of Science CO-AUTHOR 		2017
Development Of Palm Oil Blended With Semi Synthetic Oil As A Lubricant Using Four-Ball Tribotester
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2017
Improvement Of The Lubrication Performance Of Rbd Palm Stearin As An Alternative Lubricant Under Different Sliding Speeds
STROJNISKI VESTNIK/JOURNAL OF MECHANICAL ENGINEERING
Publication In Web Of Science UTM FIRST AUTHOR 		2017
Tribological Investigation Of Graphene As Lubricant Additive In Vegetable Oil
JOURNAL OF PHYSICAL SCIENCE
Publication In Scopus UTM FIRST AUTHOR 		2017
Tribological Properties Of Potential Bio-Based Lubricants From Rbd Palm Stearin And Palm Fatty Acid Distillate
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR 		2017
Tribological Performance Of Palm Kernel Oil At Various Load Using Pin-On-Disk Tribotester
JOURNAL OF MECHANICAL ENGINEERING
Publication In Scopus UTM FIRST AUTHOR 		2017
Tribological Properties Of Mineral Oil Mix With Rbd Palm Stearin Using Four-Ball Tribotester At Various Loads
ADVANCED SCIENCE LETTERS
Publication In Scopus UTM FIRST AUTHOR 		2017
Tribological Performance Of Palm Kernel Oil With Addition Of Pour Point Depressants As A Lubricant Using Four-Ball Tribotester Under Variable Load Test
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR 		2017
Tribological Properties Of Modified Palm Kernel Oil, Rbd Palm Stearin And Palm Fatty Acid Distillate Using Pour Point Dispersant
INTERNATIONAL CONFERENCE ON ADVANCED PROCESSES AND SYSTEMS IN MANUFACTURING
Conference Paper UTM FIRST AUTHOR 		2016
Nonlinear Servomotor In Single Pulse Simulation Of Electrical Discharge Machining System Modeling
INDONESIAN JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCE
Publication In Scopus CO-AUTHOR 		2016
The Effect Of Pure Aluminium Pin On Steel Disc With Varies Speed And Constant Load
4TH MALAYSIA-JAPAN TRIBOLOGY SYMPOSIUM (MJTS 2016)
Conference Paper UTM FIRST AUTHOR 		2016
Suitable Additives For Vegetable Oil-Based Automotive Shock Absorber Fluids: An Overview
LUBRICATION SCIENCE
Publication In Web Of Science UTM FIRST AUTHOR 		2016
A New Tribological Approach For Lubricated Sliding Contact Of Pitted Metallic Curvature Cup
TRIBOLOGY TRANSACTIONS
Publication In Web Of Science UTM FIRST AUTHOR 		2016
Tribological Performance Of Refined, Bleached And Deodorised Palm Olein Blends Bio-Lubricants
JOURNAL OF OIL PALM RESEARCH
Publication In Web Of Science CO-AUTHOR 		2016
Influence Of Micro-Pits Indentation And Palm Based-Oil On Taper Die Sliding Contact Surface In Cold Extrusion Process
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
Publication In Web Of Science UTM FIRST AUTHOR 		2016
Tribological Features Of Refined, Deodorized, And Bleached Palm Olein With Mineral Oil Blend
TRIBOLOGY TRANSACTIONS
Publication In Web Of Science CO-AUTHOR 		2016
Alternative Lubricants: Study On Palm Oil-Based Lubricants In Metal Forming Process
JOURNAL OF OIL PALM RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR 		2016
A New Tribological Approach On Metal Cup With Optimized Pits Model Using Spark Discharge Machine
PARTICULATE SCIENCE AND TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2016
Tribological Effects Of Vegetable Oil As Alternative Lubricant: A Pin-On-Disk Tribometer And Wear Study
TRIBOLOGY TRANSACTIONS
Publication In Web Of Science UTM FIRST AUTHOR 		2016
Magnetoviscous Effect And Thermomagnetic Convection Of Magnetic Fluid: A Review
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
Publication In Web Of Science UTM FIRST AUTHOR 		2016
Latest Development On Computational Approaches For Nanofluid Flow Modeling: Navier-Stokes Based Multiphase Models
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
Publication In Web Of Science CO-AUTHOR 		2016
The Significant Effect Of Turbulence Characteristics On Heat Transfer Enhancement Using Nanofluids: A Comprehensive Review
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
Publication In Web Of Science CO-AUTHOR 		2016
Evaluation Of Lubrication Performance Of Rbd Palm Stearin And Its Formulation Under Different Applied Loads
JURNAL TRIBOLOGI
Publication In Web Of Science UTM FIRST AUTHOR 		2016
Influence Of Micro-Pits On Sliding Motion Under Low Speeds For Block-On-Disk Tribotester
PARTICULATE SCIENCE AND TECHNOLOGY
Publication In Web Of Science UTM FIRST AUTHOR 		2016
Effect Of Addition Of Tertiary-Butyl Hydroquinone Into Palm Oil To Reduce Wear And Friction Using Four-Ball Tribotester
TRIBOLOGY TRANSACTIONS
Publication In Web Of Science UTM FIRST AUTHOR 		2016
The Tribological Characteristics Of The Cactus And Mineral Oil Blends Using Four-Ball Tribotester
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR 		2016
Investigation Of Micro-Pits Formation On Billet Surfaces In Plane Strain Extrusion
JURNAL TEKNOLOGI
Publication In Scopus UTM FIRST AUTHOR 		2016
Torrefaction Of Palm Biomass Briquettes At Different Temperature
JURNAL TEKNOLOGI (SCIENCES & ENGINEERING)
Publication In Scopus CO-AUTHOR 		2016
Development Of Palm Biomass Briquettes With Polyethylene Plastic Waste Addition
JURNAL TEKNOLOGI (SCIENCES & ENGINEERING)
Publication In Scopus CO-AUTHOR 		2016
Formulation Of Refined, Bleached And Deodorised Palm Stearin With Zinc Dialkyl-Dithiophosphate Additive And Its Tribological Performance
JURNAL TEKNOLOGI
Publication In Scopus CORRESPONDING AUTHOR 		2016
The Effects Of The Die Half Angle Of Taper Die On Plane Strain Extrusion
JURNAL TEKNOLOGI
Publication In Scopus UTM FIRST AUTHOR 		2016
Optimisation Of Dimple Depth On Cylinder In Drag Reduction
1ST MULTIDISCIPLINARY CONFERENCE ON MECHANICAL ENGINEERING 2016
Conference Paper CO-AUTHOR 		2016
Non-Edible Palm Oil : Alternative To Mineral Based Lubricant In Metal Forming Process
MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015
Conference Paper UTM FIRST AUTHOR 		2015
Tribological Performance Of Raw And Formulated Rbd Palm Kernel With Zddp Additive
TRIBOLOGY - MATERIALS, SURFACES AND INTERFACES
Publication In Scopus UTM FIRST AUTHOR 		2015
Lubricity Performances Of Palm Oil Using Pin-On-Disk Tester
INTERNATIONAL TRIBOLOGY CONFERENCE
Conference Paper UTM FIRST AUTHOR 		2015
Experimental Study Of Spherical Pins Under Varying Load Condition Using Pin-On-Disk Tribotester.
THE 8TH INTERNATIONAL MEETING ON ADVANCES IN THERMOFLUIDS
Conference Paper UTM FIRST AUTHOR 		2015
Effect Of Surface Texturing On Friction Coefficient Between Aluminum And Alloy Tool Steel Under Lubricated Sliding Contact
MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015
Conference Paper CORRESPONDING AUTHOR 		2015
Tribological Performance Of Raw And Chemically Modified Rbd Palm Kernel
MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015
Conference Paper UTM FIRST AUTHOR 		2015
Tribological Properties Of Mineral Oil Mix With Rbd Palm Stearin Using Four-Ball Tribotester At Various Loads
MECHANICAL AND MANUFACTURING ENGINEERING CONF
Conference Paper UTM FIRST AUTHOR 		2015
Lubricant Viscosity: Evaluation Between Existing And Alternative Lubricant In Metal Forming Process
THE 2ND INTERNATIONAL MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING CONFERENCE (MIMEC2015)
Conference Paper UTM FIRST AUTHOR 		2015
Evaluation On The Tribological Properties Of Double Fractionated Palm Olein At Different Load Using Pin-On-Disk Machine.
WORLD VIRTUAL CONFERENCE ON APPLIED SCIENCES AND ENGINEERING APPLICATIONS
Conference Paper UTM FIRST AUTHOR 		2015
Temperature Dependent Of Thermal Conductivity In A Stationary Fluid
WORLD VIRTUAL CONFERENCE ON APPLIED SCIENCES AND ENGINEERING APPLICATIONS
Conference Paper UTM FIRST AUTHOR 		2015
Modification Of Rbd Palm Kernel And Rbd Palm Stearin Oil With Zddp Additive Addition
WORLD VIRTUAL CONFERENCE ON APPLIED SCIENCES AND ENGINEERING APPLICATIONS
Conference Paper UTM FIRST AUTHOR 		2015
Alternative Lubricant: Tribological Behavior Of Palm Oil Based As Lubricant In Different Speed Using Pin On Disk Tribomachine
4TH INTERNATIONAL THERMAL ANALYSIS
Conference Paper UTM FIRST AUTHOR 		2015
The Behavior Of Treated Metal Curvature Cup: Improving Friction In Hard On Hard Sliding Contact
THE 2ND INTERNATIONAL MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING CONFERENCE (MIMEC2015)
Conference Paper UTM FIRST AUTHOR 		2015
Determination Of Metal Forming Lubricant'S Alternative: A Study To Plane Strain Cold Extrusion Process Of Jis-A1100 Pure Aluminum Billet
WORLD VIRTUAL CONFERENCE ON APPLIED SCIENCES AND ENGINEERING APPLICATIONS
Conference Paper UTM FIRST AUTHOR 		2015
The Effect Of Adding Diffuser By Experimental
JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2015
A Study Of Float Wave Energy Converter (Fwec) Model
JOURNAL OF ADVANCED RESEARCH IN APPLIED SCIENCES AND ENGINEERING TECHNOLOGY
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2015
Tribological Behaviour Of Zinc Dialkyl-Dithiophosphate (Zddp) As A Lubricant Additive In Rbd Palm Stearin
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2015
Natural Convection Of Alumina-Distilled Water Nanofluid In Cylindrical Enclosure: An Experimental Study
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2015
Flow Analysis Of Cooling Water In The Gas Turbine Fin Fan Cooler At Utilities Plant
JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2015
A New Approach Using Palm Olein, Palm Kernel Oil, And Palm Fatty Acid Distillate As Alternative Biolubricants: Improving Tribology In Metal-On-Metal Contact
TRIBOLOGY TRANSACTIONS
Publication In Web Of Science UTM FIRST AUTHOR 		2015
An Alternative Lubricant: The Potential Of Double Fractionated Palm Olein As A Lubricant For Enhanced Tribological Behaviour Using A Pin-On-Disk Tribo-Tester
JOURNAL OF OIL PALM RESEARCH
Publication In Web Of Science UTM FIRST AUTHOR 		2015
Review On An Electrical Discharge Machining Servomechanism System
SCIENTIA IRANICA
Publication In Web Of Science CO-AUTHOR 		2015
Evaluation On The Tribological Properties Of Double Fractionated Palm Olein At Different Loads Using Pin-On-Disc Machine
JURNAL TEKNOLOGI
Publication In Scopus UTM FIRST AUTHOR 		2015
Natural Convection Of Aluminum Oxide-Water Nanofluid
JURNAL TEKNOLOGI (SCIENCE & TECHNOLGY)
Publication In Scopus UTM FIRST AUTHOR 		2015
Determining Alternatives For Metal Forming Lubricants: A Study Using Plane Strain Cold Extrusion Process Of Jis-A1100 Pure Aluminum Billet
JURNAL TEKNOLOGI
Publication In Scopus UTM FIRST AUTHOR 		2015
Modification Of Rbd Palm Kernel And Rbd Palm Stearin Oil With Zddp Additive Addition
JURNAL TEKNOLOGI (SCIENCE & ENGINEERING)
Publication In Scopus UTM FIRST AUTHOR 		2015
Lubricant Viscosity: Evaluation Between Existing And Alternative Lubricant In Metal Forming Process
PROCEDIA MANUFACTURING
Publication In Scopus UTM FIRST AUTHOR 		2015
The Behavior Of Treated Metal Curvature Cup: Improving Friction In Hard On Hard Sliding Contact
PROCEDIA MANUFACTURING
Publication In Scopus UTM FIRST AUTHOR 		2015
An Investigation Of Hard-On-Soft Contact: For Reducing Friction In Hemispherical Cup
MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015
Conference Paper UTM FIRST AUTHOR 		2015
Development Of Computer-Aided Edm For Machining Micropits On Spherical Surface Of Hip Implant
WORLD VIRTUAL CONFERENCE ON ADVANCED RESEARCH IN MECHANICAL AND MATERIALS ENGINEERING (WVCARMME)
Conference Paper CO-AUTHOR 		2014
Power Generator Of Electrical Discharge Machining (Edm) System
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR 		2014
Effect Of Surface Modification Of Acetabular Cup With Embedded Micro-Pits On Friction Properties
AMERICAN JOURNAL OF MECHANICAL ENGINEERING
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2014
An Investigation Of Hard-On-Soft Sliding Contact Using Palm Fatty Acid Distillate
ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2014
Evaluation On The Tribological Properties Of Palm Olein In Different Loads Applied Using Pin-On-Disk Tribotester
JURNAL TRIBOLOGI
Journal Article Non Citation-Indexed UTM FIRST AUTHOR 		2014
Tribological Investigation Of Rbd Palm Olein In Different Sliding Speeds Using Pin-On-Disk Tribotester
SCIENTIA IRANICA
Publication In Web Of Science CORRESPONDING AUTHOR 		2014
Investigation Of Palm Fatty Acid Distillate Oil As An Alternative To Petrochemical-Based Lubricants
JOURNAL OF OIL PALM RESEARCH
Publication In Web Of Science CO-AUTHOR 		2014
Fluid Flow And Heat Transfer Characteristics Of Nanofluids In Heat Pipes: A Review
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
Publication In Web Of Science CO-AUTHOR 		2014
A Review On Preparation Methods And Challenges Of Nanofluids
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
Publication In Web Of Science CO-AUTHOR 		2014
Architecture And Training Algorithm Of Feed Forward Artificial Neural Network To Predict Material Removal Rate Of Electrical Discharge Machining Process
SCIENTIA IRANICA
Publication In Web Of Science CO-AUTHOR 		2014
Wear Behavior Of Titanium Alloy Lubricated With Palm Olein As Bio-Lubricant Using Pin-On-Disk Tester
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING)
Publication In Scopus CORRESPONDING AUTHOR 		2014
Investigate Jatropha Oil As New Source Of Lubricant Oil
APPLIED MECHANICS AND MATERIALS
Publication In Scopus UTM FIRST AUTHOR 		2014
Tribological Evaluation Of Mineral Oil And Vegetable Oil As A Lubricant
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING)
Publication In Scopus CORRESPONDING AUTHOR 		2014
An Experimental Investigation Of Palm Pressed Fibre Waste As Lubricant In Strip Drawing
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING)
Publication In Scopus UTM FIRST AUTHOR 		2014
Experimental Study On The Effect Of Different Speed Using Pin On Disc Tribotester
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CORRESPONDING AUTHOR 		2014
The Tribological Charactersitics Of The Blends Of Rbd Palm Olein With Mineral Oil Using Four-Ball Tribotester
JURNAL TEKNOLOGI(SCIENCE AND ENGINEERING)
Publication In Scopus CO-AUTHOR 		2014
Machining Pits On The Curvature Surface Cup Using Spark Process
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING)
Publication In Scopus UTM FIRST AUTHOR 		2014
Study Of Alternative Lubricants For Cold Extrusion Process Of A1100 Pure Aluminum
JOURNAL TECHNOLOGY (SCIENCE & ENGINEERING)
Publication In Scopus UTM FIRST AUTHOR 		2014
Lubricity Of Palm Fatty Acid Distillates At Various Rotational Speeds
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR 		2014
Development Of Computer-Aided Edm For Machining Micropits On Spherical Surface Of Hip Implant
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR 		2014
Effect Of Low Current For Machining Pit Using Electrical Discharge Machine
APPLIED MECHANICS AND MATERIALS
Publication In Scopus UTM FIRST AUTHOR 		2014
Influence Of Normal Load And Temperature On Tribological Properties Of Jatropha Oil
JURNAL TEKNOLOGI
Publication In Scopus UTM FIRST AUTHOR 		2014
Power Generator Of Electrical Discharge Machining (Edm) System
WORLD VIRTUAL CONFERENCE ON ADVANCED RESEARCH IN MECHANICAL AND MATERIALS ENGINEERING (WVCARMME)
Conference Paper CO-AUTHOR 		2014
Machining Pits On The Acetabular Surface Via Electrical Discharge Machining Process
4TH INTERNATIONAL GRADUATE CONFERENCE ON ENGINEERING, SCIENCE AND HUMANITIES (IGCESH2013)
Conference Paper CO-AUTHOR 		2013
A Comparison Of Cylindrical And Row Trenched Cooling Holes With Alignment Angle Of 90 Degree Near The Combustor Endwall
INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR 		2013
The Effect Of Current Rates On Surface Skd 11 For Electrical Discharge Machine Die Sinker
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH (ICMER) 2013
Conference Paper CORRESPONDING AUTHOR 		2013
-
IENVEX2013 - NOVEL EDM WORKPIECE POSITIONING
Clasified/Technical Report CO-AUTHOR 		2013
-
POSTER INATEX2013 - WORKPIECE POSITIONING SYSTEM FOR MACHINING MICRO PITS OF HIP IMPLANT
Clasified/Technical Report CO-AUTHOR 		2013
-
POSTER INATEX2013 - NOVEL ACETABULAR CUP WITH EMBEDDED MICROPITS FOR HIP IMPLANT APPLICATION
Clasified/Technical Report UTM FIRST AUTHOR 		2013
-
POSTER INATEX2013 - HIP IMPLANT TRIBOLOGY CHARACTERISTICS USING HIP SCREENING MECHANISM
Clasified/Technical Report CORRESPONDING AUTHOR 		2013
Differential Evolution For Optimization Of Pid Gain In Electrical Discharge Machining Control System
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING
Publication In Web Of Science CO-AUTHOR 		2013
Paraffinic Mineral Oil Lubrication For Cold Forward Extrusion: Effect Of Lubricant Quantity And Friction
TRIBOLOGY INTERNATIONAL
Publication In Web Of Science CO-AUTHOR 		2013
The Influences Of The Die Half Angle Of Taper Die During Cold Extrusion Process
ARABIAN JOURNAL OF SCIENCE AND ENGINEERING
Publication In Web Of Science CORRESPONDING AUTHOR 		2013
Friction Resistance Of Refined, Bleached And Deodorized (Rbd) Palm Olein Using Modified Pin-On-Disk Tribotester
JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING)
Publication In Scopus CO-AUTHOR 		2013
Investigation Of Physical Properties For Jatropha Oil In Different Temperature As Lubricant Oil
LIFE SCIENCE JOURNAL
Publication In Scopus CO-AUTHOR 		2013
Jatropha Oil As Alternative Source Of Lubricant Oil
LIFE SCIENCE JOURNAL
Publication In Scopus UTM FIRST AUTHOR 		2013
The Influence Of Temperature In Wear Resistance Characteristic Of Palm Fatty Acid Distillate
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CORRESPONDING AUTHOR 		2013
Palm Fatty Acid Distillate As An Alternative Source For Hydraulic Oil
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR 		2013
Investigation Of Palm Fatty Acid Distillate As An Alternative Lubricant Of Petrochemical Based Lubricants, Tested At Various Speeds
INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING
Publication In Scopus UTM FIRST AUTHOR 		2013
Wear Behaviour Of Palm Olein At Different Operating Temperature
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CORRESPONDING AUTHOR 		2013
Friction Characteristics Of Rbd Palm Olein Using Four-Ball Tribotester
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CORRESPONDING AUTHOR 		2013
Experimental Study On The Effect Of Different Speeds Applied With Palm Olein Using Pin-On-Disk Tester
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR 		2013
The Effect Of Sliding Speed On Friction And Wear Of Rbd Palm Olein
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CORRESPONDING AUTHOR 		2013
Simulation Of Micro-Edm Servomotor For Machining Micro Pits On Hip Implant
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR 		2013
Pid Controller Tuning By Differential Evolution Algorithm On Edm Servo Control System
APPLIED MECHANICS AND MATERIALS
Publication In Scopus CO-AUTHOR 		2013
Frictional Characteristics Under Corroded Brake Discs
PROCEDIA ENGINEERING
Publication In Scopus CO-AUTHOR 		2013
The Effect Of External Grit Particle Size On Friction Coefficients And Grit Embedment Of Brake Friction Material
PROCEEDIA ENGINEERING
Publication In Scopus CO-AUTHOR 		2013
Lubrication On The Curve Surface Structure Using Palm Oil And Mineral Oil Structure By Using Palm Oil And Mineral Oil
PROCEDIA ENGINEERING
Publication In Scopus UTM FIRST AUTHOR 		2013
Numerical Solution To Thermal Fluid Flow Through Porous Media Using Lattice Boltzmann Method
INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR 		2013
Cubic Interpolation Profile Method For Prediction Of Thermal Fluid Flow Through Porous Media
INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING
Publication In Scopus CO-AUTHOR 		2013
Micro-Pits On Biomaterial In Electrical Discharge Machining By Using Taguchi Method
WORLD SCIENTIFIC AND ENGINEERING ACADEMY AND SOCIETY (WSEAS2013)
Conference Paper CORRESPONDING AUTHOR 		2013
Educational Animation Of Electrical Discharge Machining Process
POSTER RESEARCH - INATEX 2012 EDUCATIONAL ANIMATION OF ELECTRICAL DISCHARGE MACHINING PROCESS
Clasified/Technical Report CO-AUTHOR 		2012
Tribological Evaluation Of Refined, Bleached And Deodorized Palm Stearin Using Four-Ball Tribotester With Different Normal Loads
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A
Publication In Web Of Science CORRESPONDING AUTHOR 		2012
The Effect Of Temperature On The Tribological Behavior Of Rbd Palm Stearin
TRIBOLOGY TRANSACTIONS
Publication In Web Of Science CO-AUTHOR 		2012
Utilization Of Waste Hydraulic Oil As Fuel In Diesel Engine
ADVANCED MATERIALS RESEARCH
Publication In Web Of Science CO-AUTHOR 		2012
Viscosoty In Cold Work Forward Extrusion Using Micro-Pits Tool
JURNAL TEKNOLOGI
Publication In Scopus CO-AUTHOR 		2012
Manufacturing Methods For Machining Micro Pits Of Hip Implant For Metal-On-Metal Lubrication
2012 INTERNATIONAL CONFERENCE ON BIOMEDICAL ENGINEERING, ICOBE 2012
Publication In Scopus CO-AUTHOR 		2012
Electrical Discharge Machining Pulse Power Generator To Machine Micropits Of Hip Implant
2012 INTERNATIONAL CONFERENCE ON BIOMEDICAL ENGINEERING, ICOBE 2012
Publication In Scopus CO-AUTHOR 		2012
Simulation Of Pso-Pi Controller Of Dc Motor In Micro-Edm System For Biomedical Application
PROCEDIA ENGINEERING
Publication In Scopus CO-AUTHOR 		2012
Tribological Behaviour Of Refined Bleached And Deodorized Palm Olein In Different Loads Using A Four-Ball Tribotester
SCIENTIA IRANICA
Publication In Web Of Science CORRESPONDING AUTHOR 		2012
Experimental Evaluation Of Palm Oil As Lubricant In Cold Forward Extrusion Process Extrusion Process
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
Publication In Web Of Science CORRESPONDING AUTHOR 		2011
Hydraulic Field Test Rig And Evaluating Plant Oil Performance
INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING
Publication In Scopus UTM FIRST AUTHOR 		2011
The Metal Flow Evaluation Of Billet Extruded With Rbd Palm Stearin
INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING
Publication In Scopus CORRESPONDING AUTHOR 		2011
The Effect Of Tool Surface Roughness In Cold Work Extrusion
JOURNAL OF APPLIED SCIENCES
Publication In Scopus CORRESPONDING AUTHOR 		2011
Lattice Boltzmann Simulation Of Plume Behavior From An Eccentric Annulus Cylinder
INTERNATIONAL JOURNAL OF MECHANICAL AND MATERIALS ENGINEERING
Publication In Scopus CO-AUTHOR 		2010
Virtual Study Of Natural Convection Heat Transfer In An Inclined Square Cavity
JOURNAL OF APPLIED SCIENCES
Publication In Scopus CO-AUTHOR 		2010
-
The Performance of RBD Palm Stearin as Lubricant in Plane Strain Extrusion Process
Proceedings CORRESPONDING AUTHOR 		2009
-
The Effect of Lubricant Viscosity in High Pressure Forming
Proceedings CORRESPONDING AUTHOR 		2009
-
Experimental Evaluation of the Effect of Taper Die on Lubricant Performance
Proceedings CORRESPONDING AUTHOR 		2009
-
Lattice Boltzmann Numerical Prediction of Flow Behavior Downstream of Cylinder Blockage at Various Reynolds Numbers
Proceedings CO-AUTHOR 		2009
-
The Evaluation of Friction Effect of RBD Palm Stearin as Cold Metal Forming Lubricant
Proceedings CORRESPONDING AUTHOR 		2009
Plasticity Analysis Of Pure Aluminium Extruded With An Rbd Palm Olein Lubricant
JOURNAL OF APPLIED SCIENCE
Publication In Scopus CORRESPONDING AUTHOR 		2009
-
Measurement of Friction Coefficient under Bulk Plastic Deformation in Plane Strain Extrusion Test
Proceedings CO-AUTHOR 		2009
A Three-Dimension Double-Population Thermal Lattice Bgk Model For Simulation Of Natural Convection Heat Transfer In A Cubic Cavity
WSEAS TRANSACTIONS ON MATHEMATICS
Publication In Scopus CO-AUTHOR 		2009
Lattice Boltzmann Numerical Prediction Of Flow Behavior Downstream Of Cylinder Blockage At Various Reynolds Numbers
WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY
Publication In Scopus CO-AUTHOR 		2009
The Effect Of Lubricant Viscosity In Cold Forward Plane Strain Extrusion Test
EUROPEAN JOURNAL OF SCIENTIFIC RESEARCH
Publication In Scopus CORRESPONDING AUTHOR 		2009
Investigation Of Frictional Constraint Effect Of Rbd Palm Stearin As Lubricant By Plane Strain Extrusion
EUROPEAN JOURNAL OF SCIENTIFIC RESEARCH
Publication In Scopus CORRESPONDING AUTHOR 		2009
-
The Evaluation of Plasticity flow of Pure Aluminum with RBD Palm Olein as Lubricant
Proceedings CORRESPONDING AUTHOR 		2009
Experimantal Study Of Palm Oil As Lubricant In Aluminum Alloy Forming Process
Advances in Thermo-Fluids
Book Chapter INDIVIDUAL AUTHOR 		2008
Improvement Of Surface Roughness Of Aluminum Products By The Micro-Grooves On Tool Surface In Cold Extrusion
Keikinzoku/Journal of Japan Institute of Light Metals
Publication In Scopus INDIVIDUAL AUTHOR 		2008
The Evaluation Of Palm Oil As Lubricant At Low Temperature
Advances in Mechanical Engineering Part II
Book Chapter INDIVIDUAL AUTHOR 		2008
Experimental Evaluation Of Rbd Palm Olein As Lubricant In Cold Metal Forming By Plane Strain Extrusion
Malaysia-Japan International Symposium on Advanced Technology 2007
Conference Paper INDIVIDUAL AUTHOR 		2007
The Performance Of Rbd Palm Stearin As Cold Metal Working Lubricant By Plane Strain Extrusion Test
Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007)
Conference Paper INDIVIDUAL AUTHOR 		2007
Investigation Of The Effects Of Frictional Contraint With Application Of Palm Olein Oil Lubricant And Paraffin Mineral Oil Lubricant On Plastic Deformation By Plane Strain Extrusion
JAPANESE JOURNAL OF TRIBOLOGY
Publication In Scopus CORRESPONDING AUTHOR 		2005

Legend : IP CATEGORY IP LEVEL

Intellectual Property Name Grant Register No. IP Level IP Category
SPHERICAL WORKPIECE POSITIONING SYSTEM IN ELECTRICAL DISCHARGE MACHINE FOR MACHINING MICRO-PITS NATIONAL PATENT
PISTON RING TRIBOTESTER LY2019008828 NATIONAL COPYRIGHT
INNOVATIVE MATERIALS FOR RESILIENT CONTACT SYSTEMS LY2018006417 NATIONAL COPYRIGHT
CFD SUITE FOR MODELLING FLOW PAST A 2D OBSTACLE NATIONAL COPYRIGHT
MECHYPEDIA: THE DIRECTORY FOR MECHANICAL ENGINEERING NATIONAL COPYRIGHT
MARKSSUBMISSION: APLIKASI PEMILIHAN TAJUK DAN PEMARKAHAN PROJEK AKADEMIK NATIONAL COPYRIGHT
PISTON RING HOLDER AND CURVED DISK LY2020004376 NATIONAL COPYRIGHT

Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL

Supervision List
IMAN GOLSHOKOUH
TRIBOLOGICAL BEHAVIOR OF PYROLYSED BIO-OIL AND PURE PLANT OILS AS LUBRICANT
PHD GRADUATED SUPERVISOR 2013
MD RAZAK BIN DAUD
CHARACTERISATION OF PITTED METALLIC CURVATURE CUP FOR LUBRICATED SLIDING CONTACT
PHD GRADUATED SUPERVISOR 2016
MOHAMMED HASSAN JABAL
TRIBOLOGICAL CHARACTERISTICS OF MINERAL AND PLANT OIL BLENDS
PHD GRADUATED CO-SUPERVISOR 2016
BINFA BONGFA
FORMULATION OF MEDIUM DUTY AUTOMOTIVE SHOCK ABSORBER FLUID USING NIGERIA CROP OIL
PHD GRADUATED SUPERVISOR 2016
NURUL AINI BINTI MOHD.AHYAN
THE EFFECT OF MICROPITS AND BIO-LUBRICANTS ON ALUMINIUM COLD WORK EXTRUSION PERFORMANCES
PHD GRADUATED SUPERVISOR 2016
NURALIZA BINTI NOORAWZI
TRIBOLOGICAL PERFORMANCE OF SUPER OLEIN, HYDRAULIC OIL AND ENGINE OIL ON MODIFIED TRIBOTESTER WITH EMBEDDED MICRO-PITS
PHD GRADUATED SUPERVISOR 2017
ZULHANAFI BIN PAIMAN
TRIBOLOGICAL PERFORMANCES OF JOURNAL BEARING USING PALM OIL BASED LUBRICANT
PHD GRADUATED SUPERVISOR 2020
ZUAN AZHARY BIN MOHD SALLEH
TRIBOLOGICAL PERFORMANCES OF BIO-BASED PALM KERNEL OIL ON MODIFIED PIN-ON-DISC TRIBOTESTER
PHD GRADUATED SUPERVISOR 2021
LEE CHIEW TIN
PHYSICOCHEMICAL AND TRIBOLOGICAL CHARACTERISTICS OF FATTY ACID COMPOSITION ON TRIMETHYLOLPROPANE ESTER-BASED BIO-LUBRICANT
PHD GRADUATED CO-SUPERVISOR 2023
ZURAIDAH BINTI RASEP
THE EFFECTS OF DIFFERENT LUBRICANTS AND MODIFIED SURFACE TEXTURE TO THE PERFORMANCE OF JOURNAL BEARING USING CFD
PHD GRADUATED CO-SUPERVISOR 2023
NURUL FARHANAH BINTI AZMAN
TRIBOLOGICAL PERFORMANCES OF NANOPARTICLES AS LUBRICANT ADDITIVES IN PALM KERNEL OIL
PHD GRADUATED SUPERVISOR 2023
NOOR DALILAH BINTI A MANAF
QUANTITATIVE MEASUREMENT AND MODELING OF WATER ADSORPTION ON AUSTENITIC STAINLESS STEEL
PHD GRADUATED CO-SUPERVISOR 2023
WAN MOHAMAD AIMAN BIN WAN YAHAYA
TRIBOLOGICAL PERFORMANCE OF FORGED ALUMINIUM WITH PALM OIL LUBRICATION USING FINITE ELEMENT ANALYSIS
PHD GRADUATED SUPERVISOR 2023
OJAOMO KOLEOLA EBENEZER
EFFECT OF MULTI-WALLED CARBON NANOTUBES AND TERTIARY-BUTYLHYDROQUINONE ADDITIVES ON TRIBOLOGICAL PERFORMANCE OF PALM OIL LUBRICANT
PHD GRADUATED SUPERVISOR 2024
NOOR AFIFAH BINTI AHMAD
PHYSICOCHEMICAL AND TRIBOLOGICAL PERFORMANCE OF ENZYMATIC TRANSESTERIFICATION-EPOXIDIZED PALM STEARIN METHYL ESTER
PHD GRADUATED SUPERVISOR 2025
LIM XING ZHI

PHD ON GOING SUPERVISOR
FADRAH HANIM BINTI AD SUHADAK
TRIMETHYLOLPROPANE (TMP) WITH REDUCED GRAPHENE OXIDE (RGO) ADDITIVE BIOLUBRICANT USAGE IN VARIOUS TEXTURED JOURNAL BEARING
PHD ON GOING SUPERVISOR
NORHAYATI BINTI AHMAD

MASTER GRADUATED SUPERVISOR 2010
MOHD RIDZUAN BIN MOHD JAMIR

MASTER GRADUATED SUPERVISOR 2010
MOHD HAFIS BIN SULAIMAN

MASTER GRADUATED SUPERVISOR 2010
NG YEN CHEONG

MASTER GRADUATED CO-SUPERVISOR 2013
TIONG CHIONG ING
TRIBOLOGICAL BEHAVIOR FOR REFINED, BLEACHED AND DEODORIZED OF PALM OLEIN AND PALM STEARIN USING FOURBALL TRIBOTESTER
MASTER GRADUATED SUPERVISOR 2013
FATEMEH BEHROUZI
NOVEL VERTICAL AXIS TURBINE FOR ENHANCING PERFORMANCE USING ARM AND SELF-ADJUSTING BLADES IN LOW SPEED CURRENT
MASTER GRADUATED CO-SUPERVISOR 2013
ABDOLBAQI MOHAMMED KHDHER

MASTER GRADUATED CO-SUPERVISOR 2013
OH PUI KUEN @ KOH PUI KUEN

MASTER GRADUATED CO-SUPERVISOR 2013
CHAN SHI WEI

MASTER GRADUATED CO-SUPERVISOR 2013
LEE YOKE KEEN

MASTER GRADUATED CO-SUPERVISOR 2013
MOHD IZHAN BIN IBRAHIM
STUDY OF MICRO-PITS FORMATION ON BILLET SURFACES IN PLANE STRAIN EXTRUSION    
MASTER GRADUATED SUPERVISOR 2014
ZULHANAFI BIN PAIMAN

MASTER GRADUATED SUPERVISOR 2015
MAK KAM WONG

MASTER GRADUATED SUPERVISOR 2015
HAFISHAH BT HALIM

MASTER GRADUATED SUPERVISOR 2015
KHALID ALWALID BIN MAZLAN

MASTER GRADUATED SUPERVISOR 2015
MOHAMAD FARIS BIN MISBAH

MASTER GRADUATED SUPERVISOR 2015
MUHAMMAD AMIRRUL AMIN BIN MOEN
CARBON NANOTUBE SYNTHESIS THROUGH QUASI-PYROLYSIS IN DIFFUSION FLAME COMBUSTION WITH VAPOUR CATALYSTS
MASTER GRADUATED SUPERVISOR 2016
GO YEN NY

MASTER GRADUATED SUPERVISOR 2016
NURASMIDA BINTI MUHAMMAD AZMIN

MASTER GRADUATED SUPERVISOR 2016
NURUL FARHANAH BINTI AZMAN
TRIBOLOGICAL PROPERTIES OF NANOPARTICLES AS LUBRICANT ADDITIVES
MASTER GRADUATED SUPERVISOR 2016
NOOR AFIFAH BINTI AHMAD
TRIBOLOGICAL PERFORMANCE OF BIOLUBRICANTS DERIVED THROUGH STRUCTURAL MODIFICATION OF PALM STEARIN OIL  
MASTER GRADUATED SUPERVISOR 2017
AHMAD AJRUDDIN BIN MAHZUN

MASTER GRADUATED SUPERVISOR 2017
MUHAMMAD RASYDAN BIN NORDIN

MASTER GRADUATED SUPERVISOR 2017
WAN MOHAMAD AIMAN BIN WAN YAHAYA
CORRELATION OF FRICTION IN ALUMINIUM COLD FORGING LUBRICATED WITH PALM OIL BASED  
MASTER GRADUATED SUPERVISOR 2018
FATIN AFIQAH BINTI MAZLAN

MASTER GRADUATED SUPERVISOR 2018
SITI NORSUHAILY BINTI MUHAMMAD NAZRI NATHAN

MASTER GRADUATED SUPERVISOR 2018
MUHAMMAD ARIF BIN DANDAN
FRICTION AND WEAR ANALYSIS OF PALM KERNEL METHYL ESTER CONTAINING A POLYMERIC VISCOSITY INDEX IMPROVER
MASTER GRADUATED SUPERVISOR 2019
NUR BAITI BINTI ISMAIL

MASTER GRADUATED SUPERVISOR 2019
MOHD SYAFIQ BIN ABD AZIZ

MASTER GRADUATED SUPERVISOR 2019
RIDZUAN BIN MOHD SALLEH

MASTER GRADUATED SUPERVISOR 2019
NORAZREENDA BINTI KAMAL BASHAH

MASTER GRADUATED SUPERVISOR 2019
MUHAMMAD AMIN BIN KAMARUZAMAN

MASTER GRADUATED SUPERVISOR 2020
SITI MARYAM BINTI ABDUL AZIZ

MASTER GRADUATED SUPERVISOR 2021
NUR FAIZIN BINTI ZAHARUDIN

MASTER GRADUATED SUPERVISOR 2022
NAZHAN HAZIQ BIN ZAINURIN
ENHANCEMENT OF FLOW UNIFORMITY IN WATER TUNNEL EQUIPPED WITH SCREEN-TYPE FLOW STRAIGHTENER USING NUMERICAL APPROACH
MASTER GRADUATED CO-SUPERVISOR 2023
AHMAD KIFLI BIN CHE AZIZ
FRICTION PROPERTIES OF SILICA-FILLED EPOXIDIZED NATURAL RUBBER TYRE TREAD
MASTER GRADUATED SUPERVISOR 2023
NUR DAYANA BINTI ISMAIL
HEALTHCARE PERSONNEL MOVEMENT AND VENTILATION STRATEGY ON PARTICLE DISPERSION USING CFD
MASTER GRADUATED CO-SUPERVISOR 2024
AMANDA MAISARAH BINTI NORAZMAN
ENHANCED THERMO-OXIDATIVE AND TRIBOLOGICAL PROPERTIES OF OLEIC ACID-BASED LUBRICANT WITH ANTIOXIDANTS AND VISCOSITY IMPROVER
MASTER GRADUATED CO-SUPERVISOR 2025
NAZHIFAH INNA SALSABILA
EVALUATION OF PHYSICAL PROPERTIES AND TRIBOLOGICAL PERFORMANCES OF PALM OIL AND COCONUT OIL BLEND AS POTENTIAL BIOLUBRICANT
MASTER ON GOING SUPERVISOR
MOHAMAD SHAHRIL MUSLIM BIN MOHD YUSOF
NUMERICAL ANALYSIS OF LUBRICATION PERFORMANCE OF PLAIN JOURNAL BEARING CONSIDERING THERMAL EFFECTS
MASTER ON GOING CO-SUPERVISOR
MUHAMMAD SYAZWAN BIN HANAFI
TRIBOLOGICAL ANALYSES OF NEW GENERATION PISTON RING  
MASTER ON GOING SUPERVISOR