GRANT(PI & MEMBERS)
41
PUBLICATIONS
95
INDEXED PUBLICATION
63
TOTAL STUDENTS
H-INDEXED (SCOPUS)
CITATIONS (SCOPUS)
Grant (PI)
Publications
Supervisions
Legend : SPONSOR TYPE OF GRANT
Grant Name | Year |
---|---|
PET3.4 Low porosity chemically bonded ceramic coating for corrosion protection application PETRONAS RESEARCH SDN. BHD. Contract |
2024 |
Research Collaboration Center for Nanocellulose BADAN RISET DAN INOVASI NASIONAL (BRIN), INDONESIA COLLABORATIVE RESEARCH AND EXTERNAL GRANT |
2024 |
Improving Structural and Mechanical Properties of Ti-Cr Alloys in Metal Arc Additive Manufacturing through Bimetallic Alloy Modification RUG OF UTM UTM Fundamental Research |
2023 |
High-Temperature Stability of Nanostructured Transition-Metal-Based/rGO Counter Electrode in Quantum Dot Sensitized Solar Cells (QDSSCs) RUG OF UTM UTM Fundamental Research |
2023 |
Effect of Praseodymium Intermetallic Compound and Hot Extrusion on the Alteration of Mg2Si Particles in Strengthening Al-15%Mg2Si Insitu Composite Fundamental Research Grant Scheme |
2022 |
EFFECT OF SIMULTANEOUS ADDITION OF PR AND SB AND HOT EXTRUSION ON MICROSTRUCTURAL AND TENSILE PROPERTIES OF AL-15%MG2SI ALLOY POST DOCTORAL FELLOWSHIP (SPECIAL) Professional Development Research University |
2021 |
UTMIcon 1.3: Characterization of Functionally Graded Alloy (FGA) RUG OF UTM UTM RA ICONIC GRANT |
2020 |
Effect of Equal Channel Angular Pressing (ECAP) on Microstructural Evolution and Tensile Properties of Er/Sm-Modified Al-15%Mg2Si Metal Matrix Composite RUG OF UTM Professional Development Research University |
2019 |
KTP-NMG 2019:PEMBANGUNAN PUSAT LATIHAN KAKISAN UTM-MACH3 RUG OF UTM Business Entity |
2019 |
Microstructural and corrosion investigation of GO/CNT nanostructured coating on porous Ti-30 at.%Ta shape memory alloys for biomedical application Fundamental Research Grant Scheme |
2019 |
SYNTHESIS AND CHARACTERIZATION OF ORDERED STRUCTURE OF TRANSITION METAL-BASED NANOPARTICLES AND ITS CATALYTIC ACTIVITY ON DIRECT-BOROHYDRIDE FUEL CELLS (DBFCS) Fundamental Research Grant Scheme |
2019 |
UTM-TDR 10.5 (T1) High Wear and Corrosion Resistance Coatings onto Steel Wire Ropes for offshore applications RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
UTM-TDR 10.1 (T2): The Effect of Alloying Elements and Reaction Layer on the Fatigue Performance and Corrosion Behavior of Coated Steel Ropes RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
UTM-TDR 10: NEW GENERATION MATERIALS WITH ULTRAHIGH PERFORMANCE FOR HIGH IMPACT INDUSTRIES RUG OF UTM UTM Transdiciplinary Research Grant |
2018 |
Modification of Al-Mg2Si-Cu Metal Matrix Composite by Element Additions and Superheating Melt Treatment RUG OF UTM Potential Academic Staff |
2018 |
HIR 5.2 : COATING CHARACTERIZATION OF CARBIDE CUTTING TOOLS RUG OF UTM High Impact Research Grant |
2018 |
BEHAVIOUR OF INTERMETALLIC COMPOUNDS FORMED BETWEEN COPPER INTERCONNECTION FILLER, NICKEL UNDERLAYER, AND SILICON WAFER FOR THROUGH-SILICON VIA (TSV) APPLICATION RUG OF UTM Tier 1 |
2018 |
Effect of PVD Coating on the Properties of Porous Ti-51wt%Ni, Ti-27wt%Nb and Ti-25wt%Ta for Biomedical Applications RUG OF UTM Tier 1 |
2018 |
CONTROLLING THE DEGRADATION RATE OF ZINC ALLOY VIA MICRO-ARC OXIDIZATION AND BIOACTIVE GLASS COATING FOR BIOMEDICAL APPLICATIONS RUG OF UTM Tier 1 |
2018 |
CORRELATION BETWEEN SUPERELASTICITY AND DAMPING CAPACITY OF CU-AL-NI SHAPE MEMORY ALLOYS WITH FOURTH ALLOYING ELEMENTS Fundamental Research Grant Scheme |
2017 |
Development of Maerogel/Epoxy Composite For Sustainable Thermal Insulation Applications MINISTRY OF ENERGY, SCIENCE, TECHNOLOGY, ENVIRONEMNT AND CLIMATE CHANGE (MESTECC) Sciencefund |
2017 |
Fabrication of Ceramic Coated Turbocharger Turbine Volute Casing for Passenger Vehicle Turbocharged Engine Prototype Development Research Grant Scheme |
2016 |
Thermodynamic and Kinetic Study of Solid State Reactions in Yttrium Iron Garnet System. RUG OF UTM Tier 2 |
2016 |
EFFECT OF CERAMIC PARTICLE ADDITION AND SUPERHEATING ON THE MORPHOLOGY AND MECHANICAL PROPERTIES OF ALUMINIUM HYBRID COMPOSITES RUG OF UTM Tier 1 |
2016 |
EFFECT OF ALLOYING ELEMENTS ADDITION ON THE CORROSION BEHAVIOUR OF TERNARY CU-AL-NI AND CU-AL-AG SHAPE MEMORY ALLOYS RUG OF UTM Tier 1 |
2015 |
Investigation on Structure-Properties of Welded Ti-based shape memory alloys produced by powder metallurgy Fundamental Research Grant Scheme |
2015 |
Mechanical and Thermal Performance of Maerogel-Based Insulation Layer For Polymeric Composite Materials RUG OF UTM Tier 1 |
2015 |
DEVELOPMENT OF ALUMINUM METAL MATRIX COMPOSITES BY IN SITU AND EX SITU FABRICATION PROCESSES RUG OF UTM Tier 1 |
2014 |
DEPOSITION OF CU INTERCONNECTION MATERIALS FOR THROUGH-SILICON VIAS (TSV) APPLICATION BY ELECTROLESS PLATING RUG OF UTM Encouragement Grant |
2014 |
DEVELOPMENT OF MAGNESIUM OXIDE/HYDROXYAPATITECOMPOSITE COATING ON AZ31 MAGNESIUM ALLOY USING THE ELECTROPHORETIC DEPOSITION PROCESS RUG OF UTM Tier 2 |
2012 |
Development of Self-healing Coatings for Anti-Fouling of Marine Structures RUG OF UTM Tier 1 |
2012 |
Influence of alloying elements and aging on martensitic transformation temperatures of Cu-based shape memory alloys Fundamental Research Grant Scheme |
2012 |
DEVELOPMENT AND CHARACTERISATION OF AMORPHOUS AND CRYSTALLINE NICKEL TITANIUM SHAPE MEMORY ALLOY COATING FOR TRIBOLOGICAL APPLICATIONS RUG OF UTM Tier 2 |
2011 |
Development of Experimental Simulation Method for Thermal Dissipation in Electronic Components Short Term |
1996 |
Legend : PUBLICATION CATEGORY TYPE OF AUTHORS
Legend : IP CATEGORY IP LEVEL
Intellectual Property Name | Grant Register No. | IP Level | IP Category |
---|---|---|---|
FABRICATION OF SUGAR PALM (ARENGA PINNATA) NANOCRYSTALLINE CELLULOSE (SPNCC)-REINFORCED POLYLACTIC ACID (PLA) BIONANOCOMPOSITES FILM VIA SONICATION AND SOLUTION CASTING PROCESSES | NATIONAL | COPYRIGHT |
Legend : SESSION LEVEL OF STUDY STATUS SUPERVISION LEVEL
Supervision List |
---|
SAFAA NAJAH SAUD INFLUENCE OF ALLOYING ELEMENTS AND AGING TREATMENT ON THE PHASE TRANSFORMATION AND SHAPE MEMORY BEHAVIOR OF CU-AL-NI SHAPE MEMORY ALLOYS PHD GRADUATED CO-SUPERVISOR 2014 |
NUR AZMAH BINTI NORDIN EFFECT OF CERIUM AND BARIUM ADDITION AND SUPERHEATING MELT TREATMENT ON THE MORPHOLOGY AND HARDNESS OF AL-MG2SI-CU COMPOSITE PHD GRADUATED SUPERVISOR 2016 |
ABDOLLAH BAHADOR LASER WELDING OF TI-51AT%NI, TI-23AT%NB AND TI-35AT%TA SHAPE MEMORY ALLOYS PRODUCED BY POWDER METALLURGY PHD GRADUATED CO-SUPERVISOR 2017 |
WEE YING CI ALLOYING AND AGING TREATMENT EFFECT ON THE SHAPE MEMORY AND DAMPING PROPERTIES OF CU-13 AL-4NI ALLOYS PHD GRADUATED SUPERVISOR 2020 |
CHONG CHIN YEE CORROSION RESISTANCE ENHANCEMENT OF HYDROXYAPATITE AND MAGNESIUM OXIDE MULTILAYER COATING ON MAGNESIUM ALLOY AZ31 VIA ELECTROPHORETIC DEPOSITION PHD GRADUATED SUPERVISOR 2021 |
HASSAN AHMED GHAZI HASSAN TRIBOLOGY AND CORROSION CHARACTERISTICS OF CARBON NANOTUBE AND POLYETHERETHERKETONE/ CARBON NANOTUBE- COATED POROUS TITANIUM - TANTALUM SHAPE MEMORY ALLOYS FOR BIOMEDICAL APPLICATIONS PHD GRADUATED CO-SUPERVISOR 2022 |
LAYLA HAYTHOOR KHARBOOT AL-AAYEDI EFFECT OF TEMPERATURE ON THE STABILITY OF NICKEL SULPHIDE REDUCED GRAPHENE OXIDE NANOCOMPOSITE COUNTER ELECTRODE IN QUANTUM DOT-SENSITIZED SOLAR CELLS PHD GRADUATED CO-SUPERVISOR 2024 |
SAIF ALI YASIR MICROSTRUCTURE CHARACTERIZATION AND MECHANICAL PROPERTIES OF GD TREATED ZRE1 MAGNESIUM ALLOY                                                                                                                PHD ON GOING CO-SUPERVISOR |
NUR SUHAILI BINTI ISMAIL AL-ZN-MG-CU PSEUDO ALLOY COATING ON MILD STEEL SUBSTRATES FOR CORROSION RESISTANCE APPLICATIONS    PHD ON GOING SUPERVISOR |
ALTAMEEMI ALI MOHAMMED HASAN EFFECT OF RARE EARTH ELEMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AL-SI HYPEREUTECTIC (ADC14) MATRIX COMPOSITES   PHD ON GOING SUPERVISOR |
MUDASSAR HUSSAIN ROLE OF INTERMETALLICS AND OXIDES IN ENHANCING FRACTURE TOUGHNESS AND CORROSION RESISTANCE OF NOVEL ALCRNISITI HIGH ENTROPY ALLOY PHD ON GOING SUPERVISOR |
AGBAYE IGNATIUS UYABEMEM PHD ON GOING SUPERVISOR |
SASAN VOSOUGH GHANBARI MASTER GRADUATED CO-SUPERVISOR 2012 |
ALI ABED SHAKIR MASTER GRADUATED SUPERVISOR 2013 |
LIM HOOI PENG WHISKER GROWTH IN TIN SURFACE FINISHES BY IMMERSION TIN PLATING AND HOT DIPPING MASTER GRADUATED CO-SUPERVISOR 2013 |
SITI ZAHIRA BINTI YUSOF EFFECT OF ENVIRONMENTAL CONDITION AND NICKEL UNDERLAYER ON WHISKERS FORMATION IN TIN SURFACE FINISH MASTER GRADUATED CO-SUPERVISOR 2014 |
NUR SYAIRAHTUL AIN BINTI MOHAMAD JAFAR MASTER GRADUATED SUPERVISOR 2016 |
NUR AFIQAH BINTI SUKIMAN MASTER GRADUATED SUPERVISOR 2018 |
ABDUSSALAM MAMOON MASTER END CROSS CAMPUS SUPERVISOR |
ALIF FAJAR PUTRAWAN EFFECT OF ADDITION OF PR-SB AND EQUAL CHANNEL ANGULAR PRESSING (ECAP) ON MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF AL-15%MG2SI COMPOSITE MASTER ON GOING SUPERVISOR |
FARIS SAEED ALJOHANI MASTER ON GOING SUPERVISOR |